Linux How to setup multi homing network

Filed under
HowTos

If you have 2 NIC (network Lan card) each connected to different networks: => eth0: 192.168.1.0/24 => eth1: 192.168.2.0/24 Consider above setup. Now if you want to route traffic to connected network only (eth0 and eth1) w/o setting Linux server as a router. This is generally called multi homing setup.

Now if you want to route traffic to connected network only (eth0 and eth1) w/o setting Linux server as a router. This is generally called multi homing setup. You don’t have to setup Linux box as a router to use multi homing Smile . Just assign as IP address to each NIC and you are done.

Full Article.