Language Selection

English French German Italian Portuguese Spanish

NimbleX 2007 - As the Name Implies...

Filed under
Linux
Reviews
-s

NimbleX is a small slackware-based distribution that made its way onto DistroWatch's Waiting List last September. While many on the list seem to stop development and disappear off the net, it appears NimbleX is progressing onward. Their site has undergone a recent update as well as their distro. NimbleX 2007 was released on Christmas Day and I decided it sounded like an interesting project to test. In NimbleX I found a wonderful candidate for your small linux needs.

To quote the site:

"NimbleX is a small but versatile operating system which is able to boot from a small 8 cm CD, from flash memory like USB pens or Mp3 players and even from the network. Because it runs entirely from a CD, USB or network it doesn't require installation or even much hardware.

Most of the advantages are related to the small size, the combination of software packages and a pretty good hardware support. You can easily carry it with you and with the right combination of parameters you can make it do some interesting stuff. NimbleX is very customizable and can be easily made to satisfy your needs."

Continuing in quoting:

Some of the most obvious things are:

  • Access data on other computers without knowing the pass.

  • Surf the Internet, download files using various protocols
  • Chat with friends using a very nice IM application
  • Play movies because most of the codecs are supported
  • Play music either in the graphical interface and the CLI
  • Make NimbleX always save you data very easily
  • Use the built-in BlueTooth support to transfer files
  • Use a pretty good office suite - KOffice 1.6.1
  • Get organized with a very powerful app. - Kontact !
  • Debug other operating systems with NimbleX
  • Back-up data easily using various methods.
  • Make NimbleX boot on other computers over the LAN
  • Play some of the various KDE Games
  • Install software over the Internet using GSlapt
  • Control remotely Windows machines with rdesktop
  • Browse Windows networks with no complications
  • Read PDF documents with the built-in software
  • NimbleX can be made to boot form anything bootable
  • NimbleX can be very fast if you boot it from HDD / USB
  • You can use several graphical interfaces (KDE, IceWM, Fluxbox)
  • The command line has the most common commands so...
  • Extend NimbleX easily by adding new modules to it:
    • Firefox 2
    • Opera 9.1
    • GIMP
    • Gaim
    • NVidia 3D Drivers
    • EMU
    • Xara LX
    • KTorrent
    • KMobileTools
    • KOffice - full
    • KDE Web Dev
    • Bluefish
    • ISO Master

Recommended Requirements are:

  • CLI
    • Pentium II or better
    • 128 MB
  • GUI
    • Pentium III or better
    • 512 MB

Minimum:

  • CLI
    • Pentium or better
    • 64 MB
  • GUI
    • Pentium II or better
    • 128 MB

I didn't have a low spec machine on which to test NimbleX, so I tested it on my usual desktop and my newly acquired laptop. The grub splash screen kinda reminds me of one openSUSE used to use, but it's updated and customized. It has several boot option such as Boot into KDE, Boot to Commandline, or KDE in limba romana. The rest of the boot is in text mode and the next graphic seen is the customized KDE splash screen. The boot process itself isn't particularly speedy, but it's acceptable.

        

At the desktop one finds an original background of off-white with a large glossy gray X. I thought it was fairly nice in that it's not gaudy and does reflect the current system somewhat. If that background doesn't suit you, there are about 7 or 8 other original nimbleX wallpapers included in several tasteful colors. Although, it seems the developers or their graphic artists are partial to black and white (or off-white and gray).

The menus aren't exactly chocked full of applications, but it's sufficient to do most of your daily tasks. However, considering the download size of 200 mb (on the nose), one wonders how they managed to include KDE, not to mention the other apps. KDE may be slimmed down to meet this size requirement, but I didn't find a whole lot missing. There are even a few screensavers present. Large applications like OpenOffice.org and Firefox are not included, but it does of course have Konqueror and it does include Koffice.

        

Some of the other included applications are Kopete, MPlayer, Juk, K3b, tvtime, Transmission (a bittorrent client), Kasablanca (ftp client), Nmap, Kontact, and several games. I found all applications tested to function very well. I had no problems with any of them. Most opened very quickly as well. One extra of note is the multimedia support included. NimbleX had no trouble playing any of the media files asked of it.

        

If one is in need of other software, one can "extend" NimbleX with modules as similarly found in Slax. They have modules for many of the most popular applications today like OpenOffice.org, Firefox, and Gimp. They even have a module for the Nvidia 3D drivers. See above for the full list. In addition, Gslapt is included. There are several software repositories already set up and I had no problems installing a few test packages.

        

As I ran through the KDE Control Center and tested the included applications I became more and more impressed. If nothing else sets NimbleX apart from the crowd, the shear performance of their system should. This has got to be the fastest implementation of KDE I've ever experienced. I don't know how they did it, but they did it. That thing is just blazing fast. I've never seen anything like it. It made me wish I had an old machine laying around on which to test it.

NimbleX runs on a 2.6.16 kernel and uses Xorg 6.9.0. The KDE version included is 3.5.4, but that's not too bad considering 3.5.6 was just tagged yesterday.

Hardware detection was acceptable. Most of my hardware was detected and a start up sound greeted me on both the desktop and laptop. The desktop boots to a 1024x768 screen using vesa. My tv card is incorrectly configured (as all Linux distributions do) and my printer is detected. My scanner was completely ignored. My network card was detected and internet connectivity was available upon boot.

On my laptop the graphics were also set up to be 1024x768, while 1200x800 is desired. As stated, sound worked. The battery monitor and power saver seemed to work fine. The touchpad responded immediately and accurately. However, despite having Kwifimanager and Wireless Assistant in the menu, I wasn't able to get my wireless card working. Ndiswrapper seemed to install the driver, but using the ndiswrapper module left an error in the logs and no wlan (or other) device appeared. Of course this is a Broadcom 4311 card, and it only works in about 1/2 the distros I've tried. Those with natively supported cards should be much happier, given the included gui apps.

NimbleX mounts all detected partitions during boot. I also didn't find a hard drive installer. However, there are instructions for manual installation on the NimbleX site. Those instructions are sparce and not very newbie friendly.

In the end I still really liked NimbleX on my desktop machine from the livecd. It was cool looking, performed well above average, with acceptable software and hardware support. The harddrive install seems like too much trouble for me in these fast paced times, but the system fits on one of those small 8cm cdroms and would be wonderful to carry along for any livecd purpose. It might be similar to Slax in some ways, but I think it distinguishes itself by coming in such a small package and delivering awesome performance. NimbleX is accurately named.

NimbleX Homepage
Download NimbleX
NimbleX Manual

Their Screenshots

My Screenshots

Small Distros

As Texstar has proven with PCLinuxOS, and Warren Woodford with Mepis, it is still possible for the little startup/hobby distros to grow into real prominence and mingle and compete with the for-profit/heavily-subsidized distros. I love this dynamic variety.

Will NimbleX become one of the biggies? Who knows? But thanks, Susan, for showcasing another beginning distro.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

A brief history of text-based games and open source

The Interactive Fiction Technology Foundation (IFTF) is a non-profit organization dedicated to the preservation and improvement of technologies enabling the digital art form we call interactive fiction. When a Community Moderator for Opensource.com suggested an article about IFTF, the technologies and services it supports, and how it all intersects with open source, I found it a novel angle to the decades-long story I’ve so often told. The history of IF is longer than—but quite enmeshed with—the modern FOSS movement. I hope you’ll enjoy my sharing it here. Read more

Fact check: Linux developer accused of pedophilia in fake blog posts

Followers of some of Reddit’s Linux-devoted subreddits were recently greeted with an unusual and disturbing discovery: pro-pedophilia and anti-Semitic blog posts from the developer of Linux Exherbo, a Linux distribution with native cross-compiling package management. A website under the developer’s name featured a number of unsavory blog posts. Fortunately, the blog appears to be fake. The developer, Bryan Østergaard, normally posts updates to a LiveJournal page under the username kloeri, although the last update dates 2014. Earlier this week, someone shared to Reddit a different blog attributed to Østergaard with a handful of more recent blog posts explaining “why” he decided to create Exherbo. Read more

Open source code worth $600m contributed to Apache

Open source code valued at over $600 million was delivered by volunteer project contributors to the Apache Software Foundation (ASF) in a single 12-month period. That's according to the Apache Software Foundation's (ASF) annual report for its 2018 fiscal year, which ended on 30 April. The report was released last week. ASF was established in 1999 and claims to be the world's largest open source foundation with more than 300 freely available, enterprise-wide projects that serve as the backbone for some of the most visible and widely used applications in computing today. Read more

RIP, Printrbot

  • Printrbot has shut down
    Printrbot, a popular Kickstarter-backed 3D printer company, has shut down, leaving only a barebones website and little explanation.
  • Pioneering desktop 3D printer maker Printrbot closes it doors
  • Printrbot Closes Doors, Saddening 3D Printing Fans Everywhere
    In a competitive market, it’s hard for any company to stay ahead of the others, and it’s a sad fact that even some of the most popular and long-lived companies succumb to heavy weather. Printrbot, founded in 2011, had legions of fans who loved its printers’ affordability, ease of assembly and use, and open source freedom. Printrbot 3D printers were 3D printers for the people – only a few hundred dollars, they provided access to 3D printing technology for people who hadn’t been able to afford it before, and although they were simple, they were high quality. Best of all, you could make them your own, tinkering with them and creating new and unique machines, as so many users did. The company was ethical, direct and honest. Some open source 3D printer companies just download files and don’t share. Printrbot dutifully shared its source files and was a rare true open source company.
  • 3D Printing Community saddened by closure of Printrbot 3D printers
    Open source 3D printer manufacturer Printrbot has announced the close of its business, citing poor sales as the reason for the decision. A simple statement on the Printrbot website from founder Brook Drumm reads: “Printrbot is closed. Low sales led to hard decisions. We will be forever grateful to all the people we met and served over the years. Thank you all.” For the time being, Drumm will reportedly be “unreachable” for comments, and plans to share his views and plans for this “final chapter” in due course. The 3D Printing Community however has take to social media in mourning of the company, with figures including Joel Telling (YouTube’s 3D Printing Nerd), Thomas Sanladerer, and Dr. Adrian Bowyer himself weighing in on the close.
  • Printrbot Shuts Down After Seven Years of Creating Open Source 3D Printers
    Printrbot, the 3D printing manufacturer which was founded in 2011 with the launch of its original Printrbot printer on Kickstarter, has announced that it's now sadly closing its doors.