Language Selection

English French German Italian Portuguese Spanish

FSF Raising Funds and Trisquel 9.0 Reaching Alpha

Filed under
GNU
  • Last chance to help us reach our membership goal in 2019!

    The pace and demands of modern life pressure us to carry computers in our pockets laden with nonfree software (our cell phones), and new threats to our privacy are popping up on every street corner, via proprietary Amazon Ring cameras, and on many kitchen counters, via “smart” home devices. Back when our movement was born, software freedom was only of great concern to people who were actively involved in development. Today, nobody in the world can afford to ignore the crucial importance of knowing what our software is doing, and keeping it from doing us harm.

    As the battles and triumphs of 2019 fade into the past and the new challenges of 2020 emerge, the Free Software Foundation (FSF) continues our commitment to the goal we’ve had from our earliest days: a future in which all software is free, and can be trusted to serve the needs and best interests of every user. Our strength depends on your support: we need you to boldly carry the message and goal of software freedom to everyone you know, bring them into the fold, and help us mobilize them to use and talk about free software.

    [...]

    We’re spending the end of this year making plans to make 2020 the best year for the FSF ever: you can read about some of these plans in the reports from our tech team, licensing and compliance team, and campaigns team. Will this be the year that we make user freedom a kitchen table issue? We’ll never stop trying – and we hope you’ll be by our side all the way.

  • Trisquel 9 Graphical ISO available for testing

    Note that the text installer is expected to be for the wrong Trisquel version at this time. Please only test the "Try Trisquel without installing" options and the graphical installer for now.

Coverage by Michael Larabel

  • FSF-Approved Trisquel 9.0 Reaches Development Milestone Before Ringing In The New Year

    Nearly two years after the release of Trisquel 8, the release of Trisquel 9 "Etiona" for this Free Software Foundation approved Linux distribution is quickly approaching. An alpha/development release of Trisquel 9 is available for testing.

    Trisquel 9 remains based upon Ubuntu 18.04 LTS while using the GNU Linux-libre kernel and other modifications to ensure the operating system is 100% free software to the ideals of the FSF. Of course, this means limited hardware support in some areas where binary microcode/firmware is otherwise required.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Kernel: Linux 5.8, Linux 5.7, FSGSBASE and HWMON

  • Improved EXT4 + XFS DAX Implementation Appears Ready To Go For Linux 5.8

    Adding to the expected changes for Linux 5.8 is improved EXT4 and XFS file-system direct access "DAX" support. DAX is the means of direct access to files backed by persistent memory (such as Intel Optane DC Persistent Memory) without needing to be copied via the page cache. Thus DAX bypasses that extra copy for reads/writes to the storage device and mapping the storage device directly into user-space.

  • The Top Linux 5.7 Features From Apple Fast Charge To Official Tiger Lake Graphics

    Assuming no last minute concerns, the Linux 5.7 kernel is set to debut as stable this weekend. Given all the weeks since the merge window and our many articles covering all the feature activity at that point (and not to be confused with our activity of new work being queued for the upcoming Linux 5.8 cycle), here is a look back at some of the top features of the Linux 5.7 kernel. Among the most interesting new features and improvements for Linux 5.7 include: - Intel Tiger Lake "Gen12" graphics are now enabled by default in being deemed stable enough for out-of-the-box support where as on prior kernels the support at the time was hidden behind a kernel module parameter.

  • Performance-Helping FSGSBASE Patches Spun For Linux A 13th Time

    The FSGSBASE Linux kernel patches that have the potential of helping performance going back to Intel Ivy Bridge era CPUs in select workloads have now hit their 13th revision to the series in the long-running effort to getting this support mainlined.

  • Linux's Hardware Monitoring "HWMON" Picking Up Notification Support

    In addition to the AMD Zen "amd_energy" driver coming for Linux 5.8, another late change now queued into hwmon staging is introducing notification support for the hardware monitoring subsystem. HWMON subsystem maintainer and Google employee Guenter Roeck has queued up notification support for this subsystem. This serves as a generic notification mechanism not only to notify user-space but also the thermal subsystem for any HWMON driver events. In the HWMON context, these events could be important like warnings/critical alarms over detected temperatures or voltages for different components.

Linux on Devices and Open Hardware/Modding

  • Developing Qt5 applications natively on Wind River Linux

    Wind River Linux provides the technologies essential to building a flexible, stable, and secure platform for your embedded devices. Based on OpenEmbedded releases from the Yocto Project, it is designed to let you customize your platform to include only the packages and features you need. Powered by bitbake, it provides the ability to build an entire Linux distribution from source by following repeatable recipes. This is really powerful, but can be foreign to application developers that already have a workflow they are comfortable with. Developers building graphical user interfaces (GUI) have their own set of tools that they rely on. Often they prefer to use an Integrated Development Environment (IDE) tailored to the language and frameworks they are working with. Typically this IDE and the tools it uses are running natively on the same platform they are building for. Fortunately, these developers can still do this on Wind River Linux. This tutorial describes building Wind River Linux with the GCC toolchain and Qt Creator included to enable native application development.

  • Udoo Bolt Gear mini-PC launches with Ryzen V1000 Udoo Bolt SBC

    Seco has launched a $399 “Udoo Bolt Gear” mini-PC kit built around its Ryzen Embedded V1000 based Udoo Bolt SBC. The $399 kit includes a metal case, 65W adapter, and a WiFi/BT M.2 card. A growing number of open-spec, community-backed SBCs ship with optional. and in some cases, standard enclosures, but most of these are simple plastic cases. Seco’s new Udoo Bolt Gear mini-PC, which is based on its Udoo Bolt SBC, provides a metal case, a power adapter, US and EU cables, a VESA mount, and a WiFi/BT kit. There are also plenty of vents to help the SBC’s standard fan cool AMD’s Ryzen Embedded V1000 SoC. [...] The Bolt and the Bolt Gear are further equipped with an Arduino Leonardo compatible Microchip Atmega32U4 MCU. The MCU can be used for robotics and other real-time applications. It can also be configured to run while the system is turned off and then turn on the computer based on trigger input.

  • Ultra-narrow DipDuino Arduino Compatible Board is a Perfect Breadboard Companion

    We previously wrote about a uChip DIP-sized Arduino Zero compatible board with 0.3″ spacing between the two rows of pins making it perfect for breadboards as it left four rows on each side of the breadboard. There’s now another similar option with the appropriately named DipDuino board equipped with a Microchip Atmega328P MCU compatible with Arduino Pro or Pro Mini boards.

  • Using Photoresistor From Raspberry PI To Detect Light

    Photoresistor (also known as photocell) is a Light Dependent Resistor (LDR). As the name suggests, this components act just like a resistor, changing its resistance in response to how much light is falling on it. Ususally, photoresistors have a very high resistance in near darkness and a very low resistance in bright ligh. This component is used to manage electronic or electric devices to answer light conditions enabling or disabling functions. Photoresistors are analogic components. So it can be used with microcontrollers having analogic inputs (like Arduino) to read light level. Unfortunately, Raspberry PI has only digital inputs (with threshold between High and Low being around 1V). This means that, without specific analogic-to-digital hardware, we’ll be able only to read if light is high or low.

SUSE: Mainframe at Home, INNOVATORS Project and YaST Development Sprints 99 and 100

  • Developing Software for Linux on Mainframe at Home

    When developing for architectures that are not mainstream, developers often have challenges to get access to current systems that allow to work on a specific software. Especially when asking to fix an issue that shows up only on big endian hardware, the answer I repeatedly get is, that it’s hard to get access to an appropriate machine. I just recently saw reports that told that the qemu project made substantial progress with supporting more current Mainframe hardware. Thus I thought, how hard could it be to create a virtual machine that allows to develop for s390x on local workstation hardware. It turned out to be much easier than I thought. First, I did a standard install of tumbleweed for s390x, which went quite easy. But then I remembered that also the OBS supports emulators, and specifically qemu to run virtual machines.

  • openSUSE for INNOVATORS Project is born

    It is with great enthusiasm that I announce the INNOVATORS for openSUSE project, is an initiative to share projects, articles and news about innovative projects on the openSUSE platform developed by the community and public and private companies. All information on this wiki is related to innovative projects that use augmented reality technology, artificial intelligence, computer vision, robotics, virtual assistants and any and all innovative technology (in all hardware plataforms ).

  • Highlights of YaST Development Sprints 99 and 100

    One hundred development sprints, that’s a nice rounded number… and a good moment to rethink the way we write and publish our reports. Yes, you read it right. This post will be the last one following our traditional format, assuming something can already be called “traditional” after four and a half years. As we will explain at the end of this post, subsequent reports will look more as a digest with links to information and not that much as a traditional blog post that tries to tell a story.

Audiocasts/Shows: LHS, Linux Headlines, Python Bytes and Talk Python to Me

  • LHS Episode #348: The Weekender XLIX

    It's time once again for The Weekender. This is our bi-weekly departure into the world of amateur radio contests, open source conventions, special events, listener challenges, hedonism and just plain fun. Thanks for listening and, if you happen to get a chance, feel free to call us or e-mail and send us some feedback. Tell us how we're doing. We'd love to hear from you.

  • 2020-05-29 | Linux Headlines

    An 8 gigabyte version of the Raspberry Pi 4 is available for purchase, Apache’s Subversion celebrates 20 years of version control with its 1.14 release, Genymobile improves its ability to control unrooted Android devices over ADB, Google’s Android Studio 4.0 launches with some major changes, and the Godot project previews a browser-based version of its game editor.

  • Python Bytes: #183 Need a beautiful database editor? Look to the Bees!
  • Talk Python to Me: #266 Refactoring your code, like magic with Sourcery

    Refactoring your code is a fundamental step on the path to professional and maintainable software. We rarely have the perfect picture of what we need to build when we start writing code and attempts to over plan and overdesign software often lead to analysis paralysis rather than ideal outcomes. Join me as I discuss refactoring with Brendan Maginnis and Nick Thapen as well as their tool, Sourcery, to automate refactoring in the popular Python editors.