Language Selection

English French German Italian Portuguese Spanish

Peaking Again

Filed under
Site News

Summary: In terms of number of daily nodes, we're at the pinnacle still (despite slow news at times of lock-downs)

Tux Machines is turning 16 exactly one month from now. We've decided to plot activity over time, as measured by number of posts/nodes. It's not the most important measure (e.g. original articles), but it's something that's not too hard to plot.

Attached to this post is tux-posts.txt, which can be converted into tux-numbers.txt as follows:

sed 's/[\t ][\t ]*/ /g' < tux-posts.txt | cut -d' ' -f3,5 >tux-numbers.txt

We can then plot it:

gnuplot -p -e 'plot "./tux-numbers.txt" with linespoints linetype 1 pointtype 2 linecolor 10'

And voila!

Plot tuxmachines posts

In a month from now we might buy a cake.

AttachmentSize
tux-posts.txt3.27 KB
tux-numbers.txt761 bytes
tuxmachines-posts.png122.12 KB

More in Tux Machines

Android Leftovers

Arm Officially Supports Panfrost Open-Source Mali GPU Driver Development

Most GPU drivers found in Arm processors are known to be closed-source making it difficult and time-consuming to fix some of the bugs since everybody needs to rely on the silicon vendor to fix those for them, and they may even decide a particular bug is not important to them, so you’d be out of luck. So the developer community has long tried to reverse-engineer GPU drivers with projects like Freedreno (Qualcomm Adreno), Etnaviv (Vivante), as well as Lima and Panfrost for Arm Mali GPUs. Several years ago, Arm management was not interested at all collaborating with open-source GPU driver development for Mali GPUs, but as noted by Phoronix, Alyssa Rosenzweig, a graphics software engineer employed by Collabora, explained Panfrost development was now done in partnership with Arm during a talk at the annual X.Org Developers’ Conference (XDC 2020). Read more

Open Up: Open Source Hardware — A Chat with Carl

From a broader lens, to produce “open source hardware” means that we have developed and shared the recipe to create a high-end commercial product that can be learned from, adapted, and used by anyone else. In the same way we’ve stood on the shoulders of the Linux and open source software giants who came before us, we now get to be pioneers in developing open source hardware for those who come next. If you want to learn more how a computer is designed or how something is made, our schematics are the instructions for how to do it. It describes every step of the process, from each piece of the machine and its dimensions, to the type of aluminum used and how to bend it. It’s similar to open source software in that you can learn from the product, adapt it to your needs, and distribute it. The difference is that it requires outside equipment to produce your own version. Open hardware has become more accessible with 3-D printing, but as we found when we were making acrylic prototypes of Thelio, you reach a point where it’s time to work with metal, which presents its own challenges. You have to cut it, bend it, and paint it, all of which requires specific equipment. Read more

Today in Techrights