Language Selection

English French German Italian Portuguese Spanish

The Lazy Guide to Installing Knoppix on a USB Key

Filed under

Knoppix, the famous live Linux CD that practically started the live CD trend, needs no introduction to most people. One of the things that's so great about it is that you can take it with you and boot to a familiar Linux environment on almost any modern computer, without touching the OS that's already installed on it.

Of course, it can be even more portable when it runs entirely off of an inexpensive USB key. So let's install it to a 1 GB USB key, and create a persistent home directory in which to store files. Only let's do it the lazy way, and keep use of the command prompt to a bare minimum.

You will need a copy of the latest Knoppix CD (v5.1.1 as of this writing) and, of course, a 1 GB USB key. If there's any data on that key you want to keep, save it before starting, because the key's going to get repartitioned (and reformatted) and any existing data will get wiped out.

A note about the mysterious art of booting from USB keys. Some computers can do it, and some can't. (Now that was a really technical statement, wasn't it?) The newer the computer's BIOS, the greater the possibility that it will work.

Generally speaking, there are two ways of booting from a USB key. The first way, the computer treats it as if it were booting from a Zip drive. This was the first way to go about it, and it requires special partitioning (so that your USB key's partition layout actually resembles that of a Zip drive). If your computer can only boot from a USB key using Zip drive emulation, then a saavy user's written a very good how-to about how to use a script on the Knoppix CD to do the partitioning, and posted it to the wiki. My how-to owes him a debt, because I used some of his ideas.

The current way is to simply treat the USB key as if it were a hard drive. This is the method we'll use here, due to its simplicity.

Also, note that Damn Small Linux (a tiny, 50 MB Knoppix-based distro) includes an easy-to-use script that will format and put DSL onto a USB key, using either Zip drive emulation or hard drive emulation. To avoid frustration, you might want to use Damn Small Linux to see if your computer actually will boot from a USB key as if it were a hard drive before performing all these steps!

To get started, boot from the Knoppix CD. When the (KDE) desktop is up and running, the first thing to do is to set a root password (by default, there is none) by clicking on the penguin icon next to the K menu and choosing "Set password for root" from the menu.

1. Creating a root password

2. Creating a root password, continued

Next, insert your USB key. KDE will most likely pop up a window asking if you want to either "Open in a new window" (i.e. browse the files on it), or "Do nothing." Choose to do nothing (or click Cancel), because we don't want it mounted just yet. The key's icon should show up on the desktop, usually as sda1 or sdb1. Carefully make note of its name (in the form "sdxy") for the next step.

Go to the K Menu > System and choose GParted, a GUI-based partition editor, enter your root password when prompted, and choose your USB key from the drop-down menu to the right of the toolbar. Delete the partition on it (you did back up your data, didn't you?) and create two new partitions, both FAT16. Partition one should be 750 MB; the second should take up the remaining space. (Make 100% sure you're partitioning your USB key, not your hard drive!) When you're done, the results should look similar to this:

3. Preparing for partitioning

When you're ready, click the Apply button.

Next, right-click on Partition #1 to bring up a context menu, and choose "manage flags." Set the flag on your new partition to "boot."

4. Setting the boot flag

When you're all done, it should look about like this in GParted:

5. Done partitioning

Again, at this point KDE may pop up two windows (for the two partitions you created) asking if you want to either see what's on your USB key or not. Tell it "no." Next, bring up a console window, type "su" to get root, and install syslinux on the USB key, using the command

syslinux /dev/sda1

(substitute the real name of your USB key's first partition for "sda1" here, if it's not sda1).

6. Installing syslinux

There are some files you'll now need to copy to your USB key's first partition, so go ahead and mount it and make it writeable. You do that by right-clicking on the key's desktop icon to bring up a context menu, and first select "mount" from the menu, and then "change read/write mode," pressing "Yes" when it asks for confirmation. At this point, there should be one file on your USB key's first partition, named "ldlinux.sys."

7. Mount the USB key's first partition

8. Make it writeable

Now we need to copy files off of the Knoppix CD onto the first partition of the USB key. Start up Konqueror as root by choosing K Menu > System > More Applications > File Manager - Super User Mode. Give it your root password when asked.

9. Start Konqueror as root

Open the /cdrom/boot/isolinux directory, select all the files in it, and copy them to the root of your USB key.

10. Copying files - 1

Next, rename the "isolinux.cfg" file on the USB key to "syslinux.cfg" and delete the unneeded file, "isolinux.bin." Continuing on, copy the "KNOPPIX" directory and the files at the root of /cdrom to the USB key.

11. Copying files - 2

It'll ask you if you want to overwrite "cdrom.ico" and "index.html". Let it, by clicking "Overwrite All". This step will take a while, since you're copying a file that's almost 700 MB in size to your USB key.

12. Copying files - 3

When that's finally done, you can make some changes to "syslinux.cfg," which is (as you might guess) the configuration file for syslinux. Select it in Konqueror, which (unless you've changed your defaults) will bring up KWrite (a text editor). At the end of the second line, the one that begins with "APPEND," try adding "dma noeject noprompt home=/media/sda2/knoppix.img", which does the following:

  • "dma" turns on dma settings for all hard drives and CD-ROM drives, which can speed things up
  • "noeject" and "noprompt" makes it so that Knoppix won't try to eject the CD (since you're using a USB key) and won't prompt you to remove the CD before rebooting
  • "/home=/media/sda2/knoppix.img" will load your soon-to-be-made persistent disk image

Those of you who've used Knoppix will recognize those as Knoppix "cheatcodes." Putting them here means you won't have to type them at the "boot:" prompt.

13. Modify syslinux.cfg

Almost done! Now to make the persistent disk image, which does more than just store your personal files from /home/knoppix -- it also saves changes you've made to configuration files, and even allows you to install programs, just as if you were running from a hard drive. (Granted, 200 MB isn't that much room.) To start, go to the Knoppix menu (the one with the penguin icon next to the K Menu) and select Configure > Create a persistent KNOPPIX disk image.

14. Create a persistent disk image - 1

When it asks you which partition to write it to, choose the second partition on your USB key. (I know the partitions are labelled "vfat" in the screenshot, but the partitions really are formatted as FAT16. Trust me.)

15. Create a persistent disk image - 2

It'll ask you to tell it how large to make the persistent disk image. Choose a number close to, but not completely filling, the partition's capacity. 200 MB should be good.

16. Create a persistent disk image - 3

Now you're (finally) done and ready to boot from the USB key. You will have to sort of babysit the boot process, because there's a dialog box that asks if you want to actually use your persistent home that comes up. (Then again, maybe you don't want to use it all the time, especially if you're using more than one computer.) You also have to explicitly give it permission to write to your persistent home. (Hint: Use the arrow keys to move; use the spacebar to select.)

About BIOS settings and booting from a USB key: On one test machine, which has a Phoenix AwardBIOS, I have to go into the CMOS setup utility, to Advanced BIOS Features, and to Hard Disk Boot Priority, then press "Page Up" until the "USB-HDD0" entry is at the top, and then save my settings and exit. After that, it'll boot from the USB key, if it finds one. (If not, it boots from the hard drive.)

On my other test machine, which has an AMI BIOS, all I have to do is press F11 to call up a menu asking which device I wish to boot from at boot time. Naturally, this is much more convenient.

That's all, folks! Have fun. (And those of you with huge 8 GB USB keys, consider installing the DVD version of Knoppix, which has the kernel headers included -- which you need in order to install such nifty things as proprietary video drivers.)

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Clarification in Article

I have followed the instructions and got a little confused here.
isolinux is a folder and has files in it. Knoppix is fighting me and not letting me copy the files, but copies the entire folder with the files. Is this right?

Open the /cdrom/boot/isolinux directory, select all the files in it, and copy them to the root of your USB key.

Also I am getting a write error when trying to edit and make the changes you have documented to "syslinux.cfg,"
It tells me it is not possilbe to write to file///media/sda1/isolinux/

I tried to complete the instructions with the isolinux folder being in /dev/sda1/isolinux (as a folder) but get an error can not find isolinux. You just get the boot prompt. I tried knoppix home=/dev/sda2 but it did not like that either.

Can you help me out?

re: Clarification in Article

Please make sure a) you know the names of your USB key's partitions (sda1/sda2? sdb1/sdb2?); Cool you've got your USB key partitions mounted read-write; and c) you've started Konqueror as root.

You'll want to copy the files in the isolinux directory (not the directory itself) to the root level of your USB key.

Truth be told, it's easier to do this at the bash prompt. For example (as root, and assuming the first partition on your USB key is "sda1"):

# cd /media/sda1
# cp -av /cdrom/boot/isolinux/* .
(don't forget the dot "." at the end)
# mv isolinux.cfg syslinux.cfg
# rm -f isolinux.bin

(The "#" represents the root prompt; don't type it.)

And to edit "syslinux.cfg", try doing it using mcedit, as root, also in a console.

(Trying to be lazy sometimes has its drawbacks. I admit to running "kcontrol" as root and changing the mouse setting to double-click to open files before doing anything with Konqueror. Makes it much easier to select files -- instead of unintentionally opening them -- that way.)

I had the same problem

What I did was save a new file called isolinux.cfg. Then I deleted the syslinux.cfg file and renamed the new isolinux.cfg to syslinux.cfg

Upon finishing, I rebooted and the key booted and I got as far as the bootup screen that says hit enter to start knoppix or F2 or F3 for help or boot options. and there it sits. Sad Any ideas? Could this have something to do with the appended options? dma perhaps? Any help running this down would be greatly appreciated as I've been trying to get linux on a stick now for days. This is as close as I've been able to get so I'm assuming it's something simple because the stick does boot. (UNlike the attempts with the Fedora approach). Many thanks for the great writeup, and TIA for any help running down the glitch!

Part 2

U of H student Tom

I also tried to edit the syslinux.cfg and get the same message. Seems like some type of security on the file.

Part 3

U of H student Tom
I right clicked on the file and went to properties and clicked on permissions gave everyone read and write and still get an error. "Could not change permissions".

Part 4

I went to the Shell console
typed in su
got to root@Knoppix

cd /media/sda1(Worked)

cp -av /cdrom/boot/isolinux/* . (don't forget the dot "." at the end)

balder.img -> cp: cannot create regular file Read only file system. same
boot.msg same

cp: overwrite './cdrom
.ico, overriding mode 0555?

Files did not copy.

mv isolinux.cfg syslinux.cfg
rm -f isolinux.bin

Seems like the CD being in read only mode is causing issues. Should I have loaded it to RAM?

U of H student Tom

Got it

I rebooted the machine and this time used the USB Knoppix copy I had versus running the CDROM version, went to root changed to SU, check the mounting status of the TOBE USB stick, updated to write access and ran the commands and it worked.

It works fine!

Some nice ideas there. Thank you



When Knoppix was first released it was heralded as revolutionary in the Linux world. Its autodetection and configuration capabilities were unsurpassed. Many of my colleagues remarked that if 'KNOPPIX can't do it, Linux can't do it'. Theoretically, one would be able to get a Knoppix CD, pop it into an arbitrary system, run it, save one's data to a partition, USB stick, etc....), reboot and the existing system would be left completely as it was before the CD was placed in the system.

- - - - - - - - - - - - - - - - - - - - - - - - - - -
don't buy World of Warcraft Gold, make'em.


Hello !

Thank you very much for the information. I need all this information to do something..Thanks again Knoppix

Libros Gratis

need a step-by-step note for booting knoppix DVD from USB flash

First of all, thanks knoppix and this nice step-by-step note for installing knoppix boot image onto a USB pendrive.

I downloaded a Knoppix 5.2.0 DVD and want to put it on a 8GB USB pendrive. I followed the steps in this note and failed because of the size limit for a FAT16 partition.

There are two really huge files under the KNOPPIX directory on the knoppix 5.2.0 DVD: KNOPPIX (2.0 GB) and KNOPPIX2 (2.1 GB). I can not copy them into one FAT16 partition which was made to 4GB on my pendrive. 4GB is already the ultimate limit for a FAT16 partition.

Is there a note for making a Knoppix DVD to boot from high-capacity pendrive? Moreover, is the FAT16 partition a must for booting from a USB pendrive? Is it possible to make the partition to be ext2? I appreciate in advance for your kind help!

Great help

Thanks a lot, it was of a great help for me.
I made a change in step 4 where I created only one partition (4Gb) in FAT32, it's working well.... seems to.

thanks again,

¦ All computers wait at the same speed

partition problems

If you go with one partition, do you lose your persistent storage option?

I have a 4MB and have been messing with it too much, with no luck. If I make a second partition, I cannot mount it in winXP to use it there (I tried both FAT16 and FAT32 -- of course, ext2 wouldn't work either). It boots ok, but that's about it.
Is there any way to get persistent storage with a bigger USB drive and allow WinXP to read/write?

I think this guide was

I think this guide was written especially for even lazy users like me Smile
I understood almost all of that, but file syslinux.cfg
it still insufficient clear for me.
Is "timeout" string really have influence for anything?

No Such Device

I created 2 partitions inside an extended partition, on a 2 GB USB stick. I didn't get the "manage flags" option so I set the 1st partition to "Active", which I guess is the same as boot. The properties in Knoppix identified the USB drive as sdc1, yet when I ran the command "syslinux /dev/sdc1" from root, I got: "no such device".


I am using Knoppix 5.1 & booted the live disk, with the USB stick already in. I was able to set permissions, mount & un-mount the device & create partitions, so I guess it must be mounted.

My knowledge of Linux is basic, so I don't know how to hotplug.

News NOT Support

Tuxmachines is a NEWS (and Review) site - perhaps you'd find answers to your tech support questions on a TECH SUPPORT Site.

Re: Support.

Point taken about the forums, anyway it still didn't work so I gave up. However the method I found below worked, on re-start I had to remove & re-insert the stick, to make the PC boot from USB, (hotplug?):

The home-page of the above site, has a list of USB install tutorials for various Linux distros.

re: support

I think what Vonskippy meant was that although your support questions are more than welcomed at Tuxmachines, they will probably receive faster and perhaps more accurate responses at forums that specialize in the software about which you're asking.

Superb Tutorial!

White modifying the KNOPPIX configuration file, those having the flash drive as 'sdbX' please use 'sdbX' in place of 'sdaX'.

Had a charm bro... Thank!


Thank you very much for this EXCELLENT tutorial.
I'm kind of new to Knoppix and Linux on the whole and this tutorial provided me structured and clear information and screenshots, exactly what I needed.
I've tried two other similar tutorials just yesterday, without success. This one did the trick!
I swear, if I could, I'd start humping you right away from happiness. *joke* =D
Thanks once again!
[sCYTHe] aka 88scythe

Installing Knoppix 6.2 from DVD on a 16GB USB Key

I followed your instructions verbatim, until I came
to a show stopper problem.
You say at step 11:

10. Copying files - 1

Next, rename the "isolinux.cfg" file on the USB key to "syslinux.cfg" and delete the unneeded file, "isolinux.bin." Continuing on, copy the "KNOPPIX" directory and the files at the root of /cdrom to the USB key.

Well, on the knoppix dvd, the directory KNOPPIX is almost 4GB in size.

Our root partition on the USB stick is 750MiB.

Could you be a little more exact as to which files in the
KNOPPIX directory shoudl be copied to our USB root partition?



More in Tux Machines

KDE: KDE Applications 18.04, KDE Connect, KMyMoney 5.0.1 and Qt Quick

  • KDE Applications 18.04 branches created
    Make sure you commit anything you want to end up in the KDE Applications 18.04 release to them :)
  • KDE Connect – State of the union
    We haven’t blogged about KDE Connect in a long time, but that doesn’t mean that we’ve been lazy. Some new people have joined the project and together we have implemented some exciting features. Our last post was about version 1.0, but recently we released version 1.8 of the Android app and 1.2.1 of the desktop component some time ago, which we did not blog about yet. Until now!
  • KMyMoney 5.0.1 released
    The KMyMoney development team is proud to present the first maintenance version 5.0.1 of its open source Personal Finance Manager. Although several members of the development team had been using the new version 5.0.0 in production for some time, a number of bugs and regressions slipped through testing, mainly in areas and features not used by them.
  • Qt Quick without a GPU: i.MX6 ULL
    With the introduction of the Qt Quick software renderer it became possible to use Qt Quick on devices without a GPU. We investigated how viable this option is on a lower end device, particularly the NXP i.MX6 ULL. It turns out that with some (partially not yet integrated) patches developed by KDAB and The Qt Company, the performance is very competitive. Even smooth video playback (with at least half-size VGA resolution) can be done by using the PXP engine on the i.MX6 ULL.

Red Hat Leftovers

Debian Leftovers

  • RcppSMC 0.2.1: A few new tricks
    A new release, now at 0.2.1, of the RcppSMC package arrived on CRAN earlier this afternoon (and once again as a very quick pretest-publish within minutes of submission).
  • sbuild-debian-developer-setup(1) (2018-03-19)
    I have heard a number of times that sbuild is too hard to get started with, and hence people don’t use it. To reduce hurdles from using/contributing to Debian, I wanted to make sbuild easier to set up. sbuild ≥ 0.74.0 provides a Debian package called sbuild-debian-developer-setup. Once installed, run the sbuild-debian-developer-setup(1) command to create a chroot suitable for building packages for Debian unstable.
  • control-archive 1.8.0
    This is the software that maintains the archive of control messages and the newsgroups and active files on I update things in place, but it's been a while since I made a formal release, and one seemed overdue (particularly since it needed some compatibility tweaks for GnuPG v1).
  • The problem with the Code of Conduct
  • Some problems with Code of Conducts

OSS Leftovers

  • Can we build a social network that serves users rather than advertisers?
    Today, open source software is far-reaching and has played a key role driving innovation in our digital economy. The world is undergoing radical change at a rapid pace. People in all parts of the world need a purpose-built, neutral, and transparent online platform to meet the challenges of our time. And open principles might just be the way to get us there. What would happen if we married digital innovation with social innovation using open-focused thinking?
  • Digital asset management for an open movie project
    A DAMS will typically provide something like a search interface combined with automatically collected metadata and user-assisted tagging. So, instead of having to remember where you put the file you need, you can find it by remembering things about it, such as when you created it, what part of the project it connects to, what's included in it, and so forth. A good DAMS for 3D assets generally will also support associations between assets, including dependencies. For example, a 3D model asset may incorporate linked 3D models, textures, or other components. A really good system can discover these automatically by examining the links inside the asset file.
  • LG Releases ‘Open Source Edition’ Of webOS Operating System
  • Private Internet Access VPN opens code-y kimono, starting with Chrome extension
    VPN tunneller Private Internet Access (PIA) has begun open sourcing its software. Over the next six months, the service promises that all its client-side software will make its way into the hands of the Free and Open Source Software (FOSS) community, starting with PIA's Chrome extension. The extension turns off mics, cameras, Adobe's delightful Flash plug-in, and prevents IP discovery. It also blocks ads and tracking. Christel Dahlskjaer, director of outreach at PIA, warned that "our code may not be perfect, and we hope that the wider FOSS community will get involved."
  • Open sourcing FOSSA’s build analysis in fossa-cli
    Today, FOSSA is open sourcing our dependency analysis infrastructure on GitHub. Now, everyone can participate and have access to the best tools to get dependency data out of any codebase, no matter how complex it is.
  • syslog-ng at SCALE 2018
    It is the fourth year that syslog-ng has participated at Southern California Linux Expo or, as better known to many, SCALE ‒ the largest Linux event in the USA. In many ways, it is similar to FOSDEM in Europe, however, SCALE also focuses on users and administrators, not just developers. It was a pretty busy four days for me.
  • Cisco's 'Hybrid Information-Centric Networking' gets a workout at Verizon
  • Verizon and Cisco ICN Trial Finds Names More Efficient Than Numbers
  • LLVM-MCA Will Analyze Your Machine Code, Help Analyze Potential Performance Issues
    One of the tools merged to LLVM SVN/Git earlier this month for the LLVM 7.0 cycle is LLVM-MCA. The LLVM-MCA tool is a machine code analyzer that estimates how the given machine code would perform on a specific CPU and attempt to report possible bottlenecks. The LLVM-MCA analysis tool uses information already used within LLVM about a given CPU family's scheduler model and other information to try to statically measure how the machine code would carry out on a particular CPU, even going as far as estimating the instructions per cycle and possible resource pressure.
  • Taking Data Further with Standards
    Imagine reading a book, written by many different authors, each working apart from the others, without guidelines, and published without edits. That book is a difficult read — it's in 23 different languages, there's no consistency in character names, and the story gets lost. As a reader, you have an uphill battle to get the information to tell you one cohesive story. Data is a lot like that, and that's why data standards matter. By establishing common standards for the collection, storage, and control of data and information, data can go farther, be integrated with other data, and make "big data" research and development possible. For example, NOAA collects around 20 terabytes of data every day.Through the National Ocean Service, instruments are at work daily gathering physical data in the ocean, from current speed to the movement of schools of fish and much more. Hundreds of government agencies and programs generate this information to fulfill their missions and mandates, but without consistency from agency to agency, the benefits of that data are limited. In addition to federal agencies, there are hundreds more non-federal and academic researchers gathering data every day. Having open, available, comprehensive data standards that are widely implemented facilitates data sharing, and when data is shared, it maximizes the benefits of "big data"— integrated, multi-source data that yields a whole greater than its parts.