Language Selection

English French German Italian Portuguese Spanish

The Lazy Guide to Installing Knoppix on a USB Key

Filed under
Howtos

Knoppix, the famous live Linux CD that practically started the live CD trend, needs no introduction to most people. One of the things that's so great about it is that you can take it with you and boot to a familiar Linux environment on almost any modern computer, without touching the OS that's already installed on it.

Of course, it can be even more portable when it runs entirely off of an inexpensive USB key. So let's install it to a 1 GB USB key, and create a persistent home directory in which to store files. Only let's do it the lazy way, and keep use of the command prompt to a bare minimum.

You will need a copy of the latest Knoppix CD (v5.1.1 as of this writing) and, of course, a 1 GB USB key. If there's any data on that key you want to keep, save it before starting, because the key's going to get repartitioned (and reformatted) and any existing data will get wiped out.

A note about the mysterious art of booting from USB keys. Some computers can do it, and some can't. (Now that was a really technical statement, wasn't it?) The newer the computer's BIOS, the greater the possibility that it will work.

Generally speaking, there are two ways of booting from a USB key. The first way, the computer treats it as if it were booting from a Zip drive. This was the first way to go about it, and it requires special partitioning (so that your USB key's partition layout actually resembles that of a Zip drive). If your computer can only boot from a USB key using Zip drive emulation, then a saavy user's written a very good how-to about how to use a script on the Knoppix CD to do the partitioning, and posted it to the Knoppix.net wiki. My how-to owes him a debt, because I used some of his ideas.

The current way is to simply treat the USB key as if it were a hard drive. This is the method we'll use here, due to its simplicity.

Also, note that Damn Small Linux (a tiny, 50 MB Knoppix-based distro) includes an easy-to-use script that will format and put DSL onto a USB key, using either Zip drive emulation or hard drive emulation. To avoid frustration, you might want to use Damn Small Linux to see if your computer actually will boot from a USB key as if it were a hard drive before performing all these steps!

To get started, boot from the Knoppix CD. When the (KDE) desktop is up and running, the first thing to do is to set a root password (by default, there is none) by clicking on the penguin icon next to the K menu and choosing "Set password for root" from the menu.


1. Creating a root password


2. Creating a root password, continued

Next, insert your USB key. KDE will most likely pop up a window asking if you want to either "Open in a new window" (i.e. browse the files on it), or "Do nothing." Choose to do nothing (or click Cancel), because we don't want it mounted just yet. The key's icon should show up on the desktop, usually as sda1 or sdb1. Carefully make note of its name (in the form "sdxy") for the next step.

Go to the K Menu > System and choose GParted, a GUI-based partition editor, enter your root password when prompted, and choose your USB key from the drop-down menu to the right of the toolbar. Delete the partition on it (you did back up your data, didn't you?) and create two new partitions, both FAT16. Partition one should be 750 MB; the second should take up the remaining space. (Make 100% sure you're partitioning your USB key, not your hard drive!) When you're done, the results should look similar to this:


3. Preparing for partitioning

When you're ready, click the Apply button.

Next, right-click on Partition #1 to bring up a context menu, and choose "manage flags." Set the flag on your new partition to "boot."


4. Setting the boot flag

When you're all done, it should look about like this in GParted:

5. Done partitioning

Again, at this point KDE may pop up two windows (for the two partitions you created) asking if you want to either see what's on your USB key or not. Tell it "no." Next, bring up a console window, type "su" to get root, and install syslinux on the USB key, using the command

syslinux /dev/sda1

(substitute the real name of your USB key's first partition for "sda1" here, if it's not sda1).


6. Installing syslinux

There are some files you'll now need to copy to your USB key's first partition, so go ahead and mount it and make it writeable. You do that by right-clicking on the key's desktop icon to bring up a context menu, and first select "mount" from the menu, and then "change read/write mode," pressing "Yes" when it asks for confirmation. At this point, there should be one file on your USB key's first partition, named "ldlinux.sys."


7. Mount the USB key's first partition


8. Make it writeable

Now we need to copy files off of the Knoppix CD onto the first partition of the USB key. Start up Konqueror as root by choosing K Menu > System > More Applications > File Manager - Super User Mode. Give it your root password when asked.


9. Start Konqueror as root

Open the /cdrom/boot/isolinux directory, select all the files in it, and copy them to the root of your USB key.


10. Copying files - 1

Next, rename the "isolinux.cfg" file on the USB key to "syslinux.cfg" and delete the unneeded file, "isolinux.bin." Continuing on, copy the "KNOPPIX" directory and the files at the root of /cdrom to the USB key.


11. Copying files - 2

It'll ask you if you want to overwrite "cdrom.ico" and "index.html". Let it, by clicking "Overwrite All". This step will take a while, since you're copying a file that's almost 700 MB in size to your USB key.


12. Copying files - 3

When that's finally done, you can make some changes to "syslinux.cfg," which is (as you might guess) the configuration file for syslinux. Select it in Konqueror, which (unless you've changed your defaults) will bring up KWrite (a text editor). At the end of the second line, the one that begins with "APPEND," try adding "dma noeject noprompt home=/media/sda2/knoppix.img", which does the following:

  • "dma" turns on dma settings for all hard drives and CD-ROM drives, which can speed things up
  • "noeject" and "noprompt" makes it so that Knoppix won't try to eject the CD (since you're using a USB key) and won't prompt you to remove the CD before rebooting
  • "/home=/media/sda2/knoppix.img" will load your soon-to-be-made persistent disk image

Those of you who've used Knoppix will recognize those as Knoppix "cheatcodes." Putting them here means you won't have to type them at the "boot:" prompt.


13. Modify syslinux.cfg

Almost done! Now to make the persistent disk image, which does more than just store your personal files from /home/knoppix -- it also saves changes you've made to configuration files, and even allows you to install programs, just as if you were running from a hard drive. (Granted, 200 MB isn't that much room.) To start, go to the Knoppix menu (the one with the penguin icon next to the K Menu) and select Configure > Create a persistent KNOPPIX disk image.


14. Create a persistent disk image - 1

When it asks you which partition to write it to, choose the second partition on your USB key. (I know the partitions are labelled "vfat" in the screenshot, but the partitions really are formatted as FAT16. Trust me.)


15. Create a persistent disk image - 2

It'll ask you to tell it how large to make the persistent disk image. Choose a number close to, but not completely filling, the partition's capacity. 200 MB should be good.


16. Create a persistent disk image - 3

Now you're (finally) done and ready to boot from the USB key. You will have to sort of babysit the boot process, because there's a dialog box that asks if you want to actually use your persistent home that comes up. (Then again, maybe you don't want to use it all the time, especially if you're using more than one computer.) You also have to explicitly give it permission to write to your persistent home. (Hint: Use the arrow keys to move; use the spacebar to select.)

About BIOS settings and booting from a USB key: On one test machine, which has a Phoenix AwardBIOS, I have to go into the CMOS setup utility, to Advanced BIOS Features, and to Hard Disk Boot Priority, then press "Page Up" until the "USB-HDD0" entry is at the top, and then save my settings and exit. After that, it'll boot from the USB key, if it finds one. (If not, it boots from the hard drive.)

On my other test machine, which has an AMI BIOS, all I have to do is press F11 to call up a menu asking which device I wish to boot from at boot time. Naturally, this is much more convenient.

That's all, folks! Have fun. (And those of you with huge 8 GB USB keys, consider installing the DVD version of Knoppix, which has the kernel headers included -- which you need in order to install such nifty things as proprietary video drivers.)

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Clarification in Article

I have followed the instructions and got a little confused here.
isolinux is a folder and has files in it. Knoppix is fighting me and not letting me copy the files, but copies the entire folder with the files. Is this right?

Open the /cdrom/boot/isolinux directory, select all the files in it, and copy them to the root of your USB key.

Also I am getting a write error when trying to edit and make the changes you have documented to "syslinux.cfg,"
It tells me it is not possilbe to write to file///media/sda1/isolinux/syslinux.org

I tried to complete the instructions with the isolinux folder being in /dev/sda1/isolinux (as a folder) but get an error can not find isolinux. You just get the boot prompt. I tried knoppix home=/dev/sda2 but it did not like that either.

Can you help me out?

re: Clarification in Article

Please make sure a) you know the names of your USB key's partitions (sda1/sda2? sdb1/sdb2?); Cool you've got your USB key partitions mounted read-write; and c) you've started Konqueror as root.

You'll want to copy the files in the isolinux directory (not the directory itself) to the root level of your USB key.

Truth be told, it's easier to do this at the bash prompt. For example (as root, and assuming the first partition on your USB key is "sda1"):

# cd /media/sda1
# cp -av /cdrom/boot/isolinux/* .
(don't forget the dot "." at the end)
# mv isolinux.cfg syslinux.cfg
# rm -f isolinux.bin

(The "#" represents the root prompt; don't type it.)

And to edit "syslinux.cfg", try doing it using mcedit, as root, also in a console.

(Trying to be lazy sometimes has its drawbacks. I admit to running "kcontrol" as root and changing the mouse setting to double-click to open files before doing anything with Konqueror. Makes it much easier to select files -- instead of unintentionally opening them -- that way.)

I had the same problem

What I did was save a new file called isolinux.cfg. Then I deleted the syslinux.cfg file and renamed the new isolinux.cfg to syslinux.cfg

Upon finishing, I rebooted and the key booted and I got as far as the bootup screen that says hit enter to start knoppix or F2 or F3 for help or boot options. and there it sits. Sad Any ideas? Could this have something to do with the appended options? dma perhaps? Any help running this down would be greatly appreciated as I've been trying to get linux on a stick now for days. This is as close as I've been able to get so I'm assuming it's something simple because the stick does boot. (UNlike the attempts with the Fedora approach). Many thanks for the great writeup, and TIA for any help running down the glitch!

Part 2

U of H student Tom

I also tried to edit the syslinux.cfg and get the same message. Seems like some type of security on the file.

Part 3

U of H student Tom
I right clicked on the file and went to properties and clicked on permissions gave everyone read and write and still get an error. "Could not change permissions".

Part 4

I went to the Shell console
typed in su
got to root@Knoppix

cd /media/sda1(Worked)

cp -av /cdrom/boot/isolinux/* . (don't forget the dot "." at the end)

balder.img -> cp: cannot create regular file Read only file system.
boot.cat same
boot.msg same

cp: overwrite './cdrom
.ico, overriding mode 0555?

Files did not copy.

mv isolinux.cfg syslinux.cfg
rm -f isolinux.bin

Seems like the CD being in read only mode is causing issues. Should I have loaded it to RAM?

U of H student Tom

Got it

I rebooted the machine and this time used the USB Knoppix copy I had versus running the CDROM version, went to root changed to SU, check the mounting status of the TOBE USB stick, updated to write access and ran the commands and it worked.

It works fine!

Some nice ideas there. Thank you

Escolar

Knoppix

When Knoppix was first released it was heralded as revolutionary in the Linux world. Its autodetection and configuration capabilities were unsurpassed. Many of my colleagues remarked that if 'KNOPPIX can't do it, Linux can't do it'. Theoretically, one would be able to get a Knoppix CD, pop it into an arbitrary system, run it, save one's data to a partition, USB stick, etc....), reboot and the existing system would be left completely as it was before the CD was placed in the system.

- - - - - - - - - - - - - - - - - - - - - - - - - - -
don't buy World of Warcraft Gold, make'em.

Thanks

Hello !

Thank you very much for the information. I need all this information to do something..Thanks again Knoppix

___________________________________
Libros Gratis

need a step-by-step note for booting knoppix DVD from USB flash

First of all, thanks knoppix and this nice step-by-step note for installing knoppix boot image onto a USB pendrive.

I downloaded a Knoppix 5.2.0 DVD and want to put it on a 8GB USB pendrive. I followed the steps in this note and failed because of the size limit for a FAT16 partition.

There are two really huge files under the KNOPPIX directory on the knoppix 5.2.0 DVD: KNOPPIX (2.0 GB) and KNOPPIX2 (2.1 GB). I can not copy them into one FAT16 partition which was made to 4GB on my pendrive. 4GB is already the ultimate limit for a FAT16 partition.

Is there a note for making a Knoppix DVD to boot from high-capacity pendrive? Moreover, is the FAT16 partition a must for booting from a USB pendrive? Is it possible to make the partition to be ext2? I appreciate in advance for your kind help!

Great help

Thanks a lot, it was of a great help for me.
I made a change in step 4 where I created only one partition (4Gb) in FAT32, it's working well.... seems to.

thanks again,

+--
¦ All computers wait at the same speed
+----

partition problems

If you go with one partition, do you lose your persistent storage option?

I have a 4MB and have been messing with it too much, with no luck. If I make a second partition, I cannot mount it in winXP to use it there (I tried both FAT16 and FAT32 -- of course, ext2 wouldn't work either). It boots ok, but that's about it.
Is there any way to get persistent storage with a bigger USB drive and allow WinXP to read/write?
Kurt

I think this guide was

I think this guide was written especially for even lazy users like me Smile
I understood almost all of that, but file syslinux.cfg
it still insufficient clear for me.
Is "timeout" string really have influence for anything?

No Such Device

I created 2 partitions inside an extended partition, on a 2 GB USB stick. I didn't get the "manage flags" option so I set the 1st partition to "Active", which I guess is the same as boot. The properties in Knoppix identified the USB drive as sdc1, yet when I ran the command "syslinux /dev/sdc1" from root, I got: "no such device".

sdc1

I am using Knoppix 5.1 & booted the live disk, with the USB stick already in. I was able to set permissions, mount & un-mount the device & create partitions, so I guess it must be mounted.

My knowledge of Linux is basic, so I don't know how to hotplug.

News NOT Support

Tuxmachines is a NEWS (and Review) site - perhaps you'd find answers to your tech support questions on a TECH SUPPORT Site.

http://www.knoppix.net/forum/
http://www.linuxforums.org/forum/knoppix-help-forum/
http://www.knoppixforum.de/
http://www.google.com/

Re: Support.

Point taken about the forums, anyway it still didn't work so I gave up. However the method I found below worked, on re-start I had to remove & re-insert the stick, to make the PC boot from USB, (hotplug?):

http://www.pendrivelinux.com/2007/01/01/usb-knoppix-510/

The home-page of the above site, has a list of USB install tutorials for various Linux distros.

re: support

I think what Vonskippy meant was that although your support questions are more than welcomed at Tuxmachines, they will probably receive faster and perhaps more accurate responses at forums that specialize in the software about which you're asking.

Superb Tutorial!

White modifying the KNOPPIX configuration file, those having the flash drive as 'sdbX' please use 'sdbX' in place of 'sdaX'.

Had a charm bro... Thank!

Awesome

Thank you very much for this EXCELLENT tutorial.
I'm kind of new to Knoppix and Linux on the whole and this tutorial provided me structured and clear information and screenshots, exactly what I needed.
I've tried two other similar tutorials just yesterday, without success. This one did the trick!
I swear, if I could, I'd start humping you right away from happiness. *joke* =D
Thanks once again!
--
[sCYTHe] aka 88scythe

Installing Knoppix 6.2 from DVD on a 16GB USB Key

I followed your instructions verbatim, until I came
to a show stopper problem.
You say at step 11:

10. Copying files - 1

Next, rename the "isolinux.cfg" file on the USB key to "syslinux.cfg" and delete the unneeded file, "isolinux.bin." Continuing on, copy the "KNOPPIX" directory and the files at the root of /cdrom to the USB key.
-----------------------------------------

Well, on the knoppix dvd, the directory KNOPPIX is almost 4GB in size.

Our root partition on the USB stick is 750MiB.

Could you be a little more exact as to which files in the
KNOPPIX directory shoudl be copied to our USB root partition?

Cheers,

JD

More in Tux Machines

4 Neat New GTK Themes for Your Linux Desktop

The new Yaru/Communitheme theme might be the talk of the Ubuntu town right now, but it’s not the only decent desktop theme out there. If you want to give your Linux desktop a striking new look ahead of the autumn then the following quad-pack of quality GTK themes might help you out. Don’t be put off by the fact you will need to manually install these skins; it’s pretty to install GTK themes on Ubuntu 18.04 LTS above, providing you set hidden folders to show (Ctrl + H) in Nautilus first. Read more Also: Getting Things GNOME

Python wriggles onward without its head

At the third annual PyBay Conference in San Francisco over the weekend, Python aficionados gathered to learn new tricks and touch base with old friends. Only a month earlier, Python creator Guido van Rossum said he would step down as BDFL – benevolent dictator for life – following a draining debate over the addition of a new way to assign variables within an expression (PEP 572). But if any bitterness about the proposal politics lingered, it wasn't evident among attendees. Raymond Hettinger, a Python core developer, consultant and speaker, told The Register that the retirement of Python creator Guido van Rossum hasn't really changed things. "It has not changed the tenor of development yet," he said. "Essentially, [Guido] presented us with a challenge for self-government. And at this point we don't have any active challenges or something controversial to resolve." Read more

Today in Techrights

today's leftovers

  • How to Install R on Ubuntu 18.04
  • How to Install HTTP Git Server with Nginx on Ubuntu 18.04 LTS
  • Everything You Need to Know about Linux Containers, Part I: Linux Control Groups and Process Isolation
  • Robert Roth: Five or More GSoC
  • Adventures with NVMe, part 2
    A few days ago I asked people to upload their NVMe “cns” data to the LVFS. So far, 643 people did that, and I appreciate each and every submission. I promised I’d share my results, and this is what I’ve found:
  • The Next Challenge For Fwupd / LVFS Is Supporting NVMe SSD Firmware Updates
    With UEFI BIOS updating now working well with the Fwupd firmware updating utility and Linux Vendor Firmware Service (LVFS) for distributing these UEFI update capsules, Richard Hughes at Red Hat is next focusing on NVMe solid-state drives for being able to ship firmware updates under Linux. Hughes is in the early stages at looking to support NVMe firmware updates via LVFS/fwupd. Currently he is hoping for Linux users with NVMe drives to send in the id-ctrl identification data on your drives to him. This data will be useful so he knows what drives/models are most popular but also for how the firmware revision string is advertised across drives and vendors.
  • [Older] Language, Networking Packages Get Updates in Tumbleweed
    There were two openSUSE Tumbleweed snapshots this past week that mostly focused on language and network packages. The Linux Kernel also received an update a couple days ago to version 4.17.13. The packages in the 20180812 Tumbleweed snapshot brought fixes in NetworkManager-applet 1.8.16, which also modernized the package for GTK 3 use in preparations for GTK 4. The free remote desktop protocol client had its third release candidate for freerdp 2.0.0 where it improved automatic reconnects, added Wave2 support and fixed automount issues. More network device card IDs for the Intel 9000 series were added in kernel 4.17.13. A jump from libstorage-ng 4.1.0 to version 4.1.10 brought several translations and added unit test for probing xen xvd devices. Two Common Vulnerabilities and Exposures fixes were made with the update in postgresql 10.5. Several rubygem packages were updated to versions 5.2.1 including rubygem-rails 5.2.1, which makes the master.key file read-only for the owner upon generation on POSIX-compliant systems. Processing XML and HTML with python-lxml 4.2.4 should have fewer crashes thanks to a fix of sporadic crashes during garbage collection when parse-time schema validation is used and the parser participates in a reference cycle. Several YaST packages receive updates including a new ServiceWidget to manage the service status with yast2-ftp-server 4.1.3 as well with yast2-http-server, yast2-slp-server and yast2-squid 4.1.0 versions.
  • Red Hat Inc Risk Points versus Technology
  • 10 Efficient Raspberry Add-ons To Enhance Performance - Part 8
    Sometimes you may find yourself in great need to improve the functionality of your Raspberry Pi. There is a good chance your Raspberry does not support the functionality you want. There is also a chance that it supports your dream functionality but with the help of an external tool. An add-on in other words. It is pretty obvious that your dream add-on exists in the market or someone somewhere is cracking an algorithm to build. Never mind, here we compile a list of the best add-ons to get for your Raspberry in 2018.
  • Secure Email Service Tutanota sees F-Droid Release
    Back in February, I reviewed an email provider called Tutanota. If you read the article, you will remember that I thought very highly of the service. In my eyes, there were very few downsides to using the encrypted mail service, one of them being that you couldn’t use third-party email clients like Thunderbird for desktop computers or K-9 Mail for mobile devices.
  • Motorola Announces Android Pie Updates for 8 smartphones excluding Moto E5 & G5
  • How To Unsend Emails On Gmail For Android?
  • Nerd Knobs and Open Source in Network Software
    Tech is commoditizing. I've talked about this before; I think networking is commoditizing at the device level, and the days of appliance-based networking are behind us. But are networks themselves a commodity? Not any more than any other system. We are running out of useful features, so vendors are losing feature differentiation. This one is going to take a little longer… When I first started in network engineering, the world was multiprotocol, and we had a lot of different transports. For instance, we took cases on IPX, VIP, Appletalk, NetBios, and many other protocols. These all ran on top of Ethernet, T1, Frame, ATM, FDDI, RPR, Token Ring, ARCnet, various sorts of serial links ... The list always felt a little too long, to me. Today we have IPv4, IPv6, and MPLS on top of Ethernet, pretty much. All transports are framed as Ethernet, and all upper layer protocol use some form of IP. MPLS sits in the middle as the most common "transport enhancer." The first thing to note is that space across which useful features can be created is considerably smaller than it used to be.
  • Meetings that make people happy: Myth or magic?
    People tend to focus on the technical elements of meeting prep: setting the objective(s), making the agenda, choosing a place and duration, selecting stakeholders, articulating a timeline, and so on. But if you want people to come to a meeting ready to fully engage, building trust is mission-critical, too. If you need people to engage in your meetings, then you're likely expecting people to come ready to share their creativity, problem-solving, and innovation ideas.
  • Building microprocessor architectures on open-source hardware and software
     

    "The real freedom you get from open source projects is much more, and more important than the fact that you don't have to pay for it," Frank Gürkaynak, Director of ETHZ's Microelectronics Design Center, writes in an article posted on All About Circuits. "Researchers can take what we provide and freely change it for their experiments. Startup companies can build on what we provide as a starting point and concentrate their time and energy on the actual innovations they want to provide. And people who are disturbed by various attacks on their systems [1, 2] have the chance to look inside and know what exactly is in their system."

  • Create DIY music box cards with Punchbox
    That first time almost brought tears to my eyes. Mozart, sweetly, gently playing on the most perfect little music box. Perfectly! No errors in timing or pitch. Thank you, open source—without Mido, Svgwrite, PyYAML, and Click, this project wouldn't have been possible.
  • Fund Meant to Protect Elections May Be Too Little, Too Late
    The Election Assistance Commission, the government agency charged with distributing federal funds to support elections, released a report Tuesday detailing how each state plans to spend a total of $380 million in grants allocated to improve and secure their election systems. But even as intelligence officials warn of foreign interference in the midterm election, much of the money is not expected to be spent before Election Day. The EAC expects states to spend their allotted money within two to three years and gives them until 2023 to finish spending it. Election experts have expressed skepticism that the money will be enough to modernize election equipment and secure it against state-sponsored cyber threats.