Language Selection

English French German Italian Portuguese Spanish

today's howtos

Filed under
HowTos
  • LFCA: Learn Binary and Decimal Numbers in Network – Part 10

    In Part 9 of the LFCA series, we covered the basics of IP addressing. To better understand IP addressing, we need to pay more attention to these two types of IP address representation – binary and decimal-dotted quad notation. As mentioned earlier, an IP address is a 32-bit binary number that is usually represented in decimal format for ease of readability.

    The binary format uses only the digits 1 and 0. This is the format that your computer comprehends and through which data is sent across the network.

    However, to make the address human-readable. It is conveyed in a dotted-decimal format which the computer later converts into binary format. As we stated earlier, an IP address is made up of 4 octets. Let’s dissect the IP address 192.168.1.5.

  • 6 advanced tcpdump formatting options

    The final article in this three-part tcpdump series covers six more tcpdump packet capturing trick options.

  • 5 Funny Commands to use in Linux and Terminal

    Not everything in Linux is serious, fortunately we can find fun programs created for the sole purpose of entertaining us. You may be wondering why? Well, because we are human and at the end of the day we need a little variety, laughter and maybe a drink on the train. And yes, speaking of the train, let’s introduce you to the first fun command-type application in Linux.

  • Ubuntu Blog: Should you ever reinstall your Linux box? If so, how?

    Broadly speaking, the Linux community can be divided into two camps – those who upgrade their operating systems in-vivo, whenever there is an option to do so in their distro of choice, and those who install from scratch. As it happens, the former group also tends to rarely reinstall their system when problems occur, while the latter more gladly jump at the opportunity to wipe the slate clean and start fresh. So if asked, who should you listen to?

    The question of system management in Linux is a complex one, with as wide a range of answers as there are distributions. In this blog post, we discuss the concept of reinstall, and whether it’s necessary. Then, we address several other closely related ideas like system imaging, full disk encryption, and data backups.

    [...]

    System problems are an unfortunate side effect of software usage. With some luck and operational discipline, you can avoid most of them. When they do happen, you want to know what to do. Reinstalling your Linux system is always an option, but it’s usually not necessary, even for various difficult, complex problems.

    Even if you do decide to reinstall, you should consider using a live session to inspect the system or perform any last-minute backups, have a solid backup procedure in place regardless, and weigh the benefits of encryption against your day-to-day needs and risks. System images can also help you reduce the hassle of getting back to speed when you do decide to “reset” your distro. That’s all we have on Linux reinstallations. If you have any comments or suggestions, please join our forum, and let us know your thoughts.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.