Language Selection

English French German Italian Portuguese Spanish

FreeBSD 12.3-BETA1 Now Available

Filed under
BSD

The first BETA build of the 12.3-RELEASE release cycle is now available.

Installation images are available for:

o 12.3-BETA1 amd64 GENERIC
o 12.3-BETA1 i386 GENERIC
o 12.3-BETA1 powerpc GENERIC
o 12.3-BETA1 powerpc64 GENERIC64
o 12.3-BETA1 powerpcspe MPC85XXSPE
o 12.3-BETA1 sparc64 GENERIC
o 12.3-BETA1 armv6 RPI-B
o 12.3-BETA1 armv7 BANANAPI
o 12.3-BETA1 armv7 BEAGLEBONE
o 12.3-BETA1 armv7 CUBIEBOARD
o 12.3-BETA1 armv7 CUBIEBOARD2
o 12.3-BETA1 armv7 CUBOX-HUMMINGBOARD
o 12.3-BETA1 armv7 RPI2
o 12.3-BETA1 armv7 WANDBOARD
o 12.3-BETA1 armv7 GENERICSD
o 12.3-BETA1 aarch64 GENERIC
o 12.3-BETA1 aarch64 RPI3
o 12.3-BETA1 aarch64 PINE64
o 12.3-BETA1 aarch64 PINE64-LTS

Note regarding arm SD card images: For convenience for those without
console access to the system, a freebsd user with a password of
freebsd is available by default for ssh(1) access.  Additionally,
the root user password is set to root.  It is strongly recommended
to change the password for both users after gaining access to the
system.

Installer images and memory stick images are available here:

    https://download.freebsd.org/ftp/releases/ISO-IMAGES/12.3/

The image checksums follow at the end of this e-mail.

If you notice problems you can report them through the Bugzilla PR
system or on the -stable mailing list.

If you would like to use SVN to do a source based update of an existing
system, use the "releng/12.3" branch.

Please note, the release notes page is not yet complete, and will be
updated on an ongoing basis as the 12.3-RELEASE cycle progresses.

=== Virtual Machine Disk Images ===

VM disk images are available for the amd64, i386, and aarch64
architectures.  Disk images may be downloaded from the following URL
(or any of the FreeBSD download mirrors):

    https://download.freebsd.org/ftp/releases/VM-IMAGES/12.3-BETA1/

The partition layout is:

    ~ 16 kB - freebsd-boot GPT partition type (bootfs GPT label)
    ~ 1 GB  - freebsd-swap GPT partition type (swapfs GPT label)
    ~ 20 GB - freebsd-ufs GPT partition type (rootfs GPT label)

The disk images are available in QCOW2, VHD, VMDK, and raw disk image
formats.  The image download size is approximately 135 MB and 165 MB
respectively (amd64/i386), decompressing to a 21 GB sparse image.

Note regarding arm64/aarch64 virtual machine images: a modified QEMU EFI
loader file is needed for qemu-system-aarch64 to be able to boot the
virtual machine images.  See this page for more information:

    https://wiki.freebsd.org/arm64/QEMU

To boot the VM image, run:

    % qemu-system-aarch64 -m 4096M -cpu cortex-a57 -M virt  \
	-bios QEMU_EFI.fd -serial telnet::4444,server -nographic \
	-drive if=none,file=VMDISK,id=hd0 \
	-device virtio-blk-device,drive=hd0 \
	-device virtio-net-device,netdev=net0 \
	-netdev user,id=net0

Be sure to replace "VMDISK" with the path to the virtual machine image.

Read more

FreeBSD 12.3 Prepares For New Release Ahead Of Christmas, Beta

  • FreeBSD 12.3 Prepares For New Release Ahead Of Christmas, Beta Starts

    The FreeBSD team has begun preparations for their next release process with an aim to ship FreeBSD 12.3 in early December.

    Announced on Friday was FreeBSD 12.3-BETA1 as the first stepping stone toward this next FreeBSD operating system update. While FreeBSD 13 is already out in production and all major feature work is centered around what will become FreeBSD 14, the FreeBSD 12 series continues maturing for those still on that N-1 stable series.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

This week in KDE: Getting Plasma 5.24 ready for release - Adventures in Linux and KDE

Plasma 5.24 is almost ready! I mentioned last week that I haven’t been posting about fixes for regressions in 5.24 that never got released, because there would be too many. Nonetheless people have been working very hard on this, and we’re down to only 7, with two of them having open merge requests! Working on those is appreciated, as it helps improve the stability of the final release in a week and a half. Read more

Open Hardware/Modding: Olimex, Arduino, and More

  • iMX8MPlus-SOM is alive and boots!

    This board development started in April 2021 and finished August 2021 but the semiconductor shortages didn’t allow us to test the prototypes until recently. We assembled 4 boards and all theyare alive and boot.

  • Arduino Portenta gets an LTE Cat. M1/NB IoT GNSS shield - CNX Software

    Arduino PRO Portenta family of industrial boards is getting a new LTE Cat. M1/NB-IoT GNSS shield that adds global connectivity and positioning capabilities through the Cinterion TX62-W LPWAN IoT module by Thales.

  • Long Range Burglar Alarm Relies On LoRa Modules | Hackaday

    [Elite Worm] had a problem; there had been two minor burglaries from a storage unit. The unit had thick concrete walls, cellular signal was poor down there, and permanent wiring wasn’t possible. He thus set about working on a burglar alarm that would fit his unique requirements. An ESP32 is the heart of the operation, paired with a long-range LoRa radio module running at 868 MHz. This lower frequency has much better penetration when it comes to thick walls compared to higher-frequency technologies like 4G, 5G or WiFi. With a little coil antenna sticking out the top of the 3D-printed enclosure, the device was readily able to communicate back to [Elite Worm] when the storage unit was accessed illegitimately.

You Should Be In Control of Your Tech

On the hardware front having control means hardware you can open and inspect and is designed for repairability. That hardware should ideally run firmware (as much as possible) that is free software so you can also inspect and update it. If the hardware provides security features, they should be designed to put you in control, not the vendor, including control of any keys. The hardware should not require the vendor’s signatures (and therefore their permission) to boot an operating system, but instead should let you boot into whatever operating system you prefer. The operating system and the software it runs, should all be free software. Free software by its very nature puts you in full control. You have control because you can not only inspect the software to see what it does, you (or someone else in the community with software development knowledge) can change the software if it operates outside your interests. You may have noticed that you don’t tend to have a lot of adware or spyware in the free software world. That’s because it’s difficult to hide spyware inside of code that anyone can inspect. Another reason is that if free software behaves in a way that runs counter to the user’s wishes (such as capturing and selling their data, or popping up unwanted ads), the user (or someone else in the community) could simply create a legitimate fork of the project with those objectionable bits removed. Read more

What’s New in KDE Plasma 5.24: 5 Major Improvements to Expect

KDE is set to release Plasma 5.24, the first major release of 2022. The beta version is already out and gives a glimpse of what new features to expect in KDE Plasma 5.24. This new version brings forward various updates spread across the entire KDE ecosystem and improves things like Wayland support and system navigation. Read below to find out all the exciting new features you can expect in KDE Plasma 5.24, which will be released in February 2022. Read more