Language Selection

English French German Italian Portuguese Spanish

Ubuntu Studio 7.04 - The Crowning Jewel of the Ubuntu Family

Filed under
Reviews
Ubuntu
-s

Ubuntu Studio 7.04 was finally released yesterday to what seemed like quite a bit of excitement. Ubuntu Studio is a version that focuses on multimedia creation and manipulation with what appears to me as an emphasis on music. At the time of this writing the official website seems to be experiencing a bit of trouble, perhaps due to the high traffic. In any case, sometimes the early bird does gets his worm and this time I was up early.

The Install

The downloadable file was a traditional install cdrom image and utilizes the older Ubuntu ncurses interface. It goes throught the basic steps of gathering information such as keyboard and timezone before starting the partitioning phase. There is the choice of guided or manual partitioning methods. Guided will offer the user pre-prepared choice schemes that will likely entail formatting the whole of the harddrive, whereas manual will allow one to use partitions previously in place or set up their drive as desired. The next step is choosing the software packages. In this case one picks from the major categories Music, Video, Plugins, and Graphics. Choosing all three resulted in a 2.5 gig install. There are a few points when one is asked for their input such as desired screen resolution(s), so don't stray too far while the installer works. Then there is the configuration step. This is short and sweet. It consists of setting up a user account and password, setting up the network connection, and a bootloader. One has the choice of a generic or a low-latency kernel. All in all, it probably took the better part of an hour to complete, but then I kept wandering off only to come back to a screen needing input. So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind.

The System

The resulting system starts with a lovely silent splash. It consists of this colorful background that kinda reminds me of a fallen Christmas tree after two or three too many eggnogs. It's many different bright spots of color. It does have a nice progress bar and the Ubuntu Studio logo, but in at least my case, both were obstructed by the ugly blue verbose rectangle right in the middle. They should just do away with that and let F2 or <esc> take one to the verbose screen. It just kills the whole effect and given that the font is almost the same shade of blue I can't read the output anyway. Next one logs in at an exceptionally nice gdm theme. Again the same color parade background with the options hidden behind a panel with the Options button where one might usually expect to see a menu start button on a desktop screen. And in fact, that's what one gets when it is depressed. A lovely dark-themed menu with blue highlights containing the usual options of sessions, languages, and actions is found. I was enamored with Ubuntu Studio from this point on.

The gnome splash is a customized and tasteful center focal box. Upon first login I was greeted by the startup sound which indicated to me that perhaps my sound was properly auto-detected and configured. The desktop wallpaper seemed like a let down after the colorful introduction. It's a basic neutral gray abstract with areas of varying darker gray blending in and out. However, given the windows theme, it may have been a logical choice. The windec contains a shiny rounded 3D title bar in dark gray or almost black. The theme colors are medium to darkish gray and blue (with aqua-blue tendencies) highlights and progress bars. Despite my lame description, it is really quite attractive and we will probably have to rely on the screenshots to form an accurate picture. Even with the bland wallpaper, the look and feel of Ubuntu Studio gives one a modern and hip yet tasteful interface. The theme is dark, but yet it doesn't seem to cross the line into "too dark." No discernable eye strain was experienced. Suffice to say it's just really cool looking.

Ubuntu Studio comes with a few window and gdm themes as well as a couple of backgrounds and a nice selection of xscreensavers. Many screensavers worked well under vesa and most of the 3D screensavers, save the gl, worked fairly well under "nv." One item of note is the refreshing sound theme. One has the commonly used startup and logout sounds, but with Ubuntu Studio one has cute little non-obtrusive "clicks" when clicking upon applications in the menu or options such as drop-down boxes in applications. Sounds during interface interaction seems to be a trend of the past and it was refreshing to hear audible indicators again. I'm not sure I ever experienced sound during menu interaction before. It was a nice touch adding polish to the package.

One has the usual Preferences and Administration utilities under the familiar Gnome menus. Accessories include a calculator, simple text editor, disk usage analyzer, a search function, and an online dictionary.

Ubuntu Studio comes with a software/system update tool. An applet appears in the upper panel when updates are available. At the time of testing, there were 13 updates available already. When clicking the applet indicator icon an Update Manager window opens listing all the available updates. One can choose install one, all, none, or any combination of the updates. Clicking "Install Updates" installs the updates. The Update Manager also has a "Check" button that can be used to check for updates at any time. The process of installing the 13 updates completed smoothly with no problems here.

The regular package management utility is Synaptic. For those who may not know, Synaptic is a 3-paned graphical application for installing, upgrading, or removing software packages from one's system. It contains a list of categories, individual packages, and information in those pane. It also has a nice search function. As is usually the case, I had no issues with Synaptic. As with the Update Manager, packages are commonly downloaded from a remote mirror. Ubuntu Studio comes with some sources already defined, but if needed there is a Sources utility to add, subtract, or note any package repositories as well. These can include cdrom or local and remote mirror entries.

The foundation is Linux 2.6.20.15, Xorg 7.2.0, gcc 4.1.2 and Gnome 2.18.1.

        




Hardware

The time was set correctly which is a process I once took for granted, but since obtaining my notebook pc, this has become a bit iffy. I don't know the technical reasons, but some distros just do not read the bios clock correctly and I commonly get anything from an hour to a day skew in either direction. It's one of those quirks to which one quickly adjusts (by memorizing time protocol mirror addresses) and additionally forms the basis for another testing criteria. My touchpad was responsive and accurate with none of the disappearing, wandering, blinking, or vibrating cursor effects I've experienced with some other distros. As stated above, my sound was automagically configured and working well with the added bonus of, unlike some other distros, a pleasing default sound volume. Many distros default to muted, which is more desirable to the other default extreme sometimes experienced of blowing one's hair back. This is the first time I was able to successfully setup my remote samba printer using the Gnome graphical utility too.

But the news is not all rosy. One of the lesser issues was that X was setup to use "vesa" at the graphics driver. Whereas it performed well (which again, is not always the case with some of the newer X server implementations), it did limit my viewing resolution to 1024x768. I was able to obtain my desired 1280x800 by switching to "nv."

The main issue that almost brought my review to a screeching halt is, as you probably guessed, wireless support. As I try to reiterate in all my reviews, my chipset is reliant upon Windows drivers. Newer NdisWrapper tools usually allow me to use this hardware and, fairly or unfairly, its implementation is one of the testing criteria I use. I'm not sure why it works in many distros and yet doesn't work in others. I'd say the batting average is roughly better .500. So whereas judging a distro as worthy if I can use this piece of winhardware may not be exactly fair, it's a situation in which many prospective (or current) Linux users find themselves. In the case of Ubuntu Studio I encountered a predicament not previously experienced. When I attempted to install the windows drivers using ndiswrapper I was told at the commandline that I should install the ndiswrapper-common package, which I did. But when I tried again to use ndiswrapper -i /media/win/SWSetup/WLAN/bcmw5l.inf I was told "no ndiswrapper package could be found." There was a bash executable file called /usr/sbin/ndiswrapper, but it was a script to check for the latest version on the system to use and output the error if not found. Looking on the cdrom I found the ndiswrapper-common deb as well as a ndiswrapper-utils. When trying to reinstall them I was told that ndiswrapper-common was already installed and ndiswrapper-utils had be deprecated. So, at this point, I gave up and again, this is usually where my review would have ended. But Ubuntu Studio looked so darn good that I used two 25 foot cables with a router in the middle to hook my laptop (which resides in the living room as opposed to my office/server room) to the internet lifeblood. One good point to mention was the fact that just as soon as inserting that now seemingly ancient rj-45 technology into my laptop's receptacle a popup appeared informing me that I was now connected to the internet. Now I was free to resolve this ndiswrapper debacle.

Battery monitoring is almost a non-issue these days. Every distro, including Ubuntu Studio, seems to correctly display battery life and charging status. Powersaving is another area that is correctly implemented in Ubuntu Studio, scaling back the cpu during times of lesser demand although a monitoring apps isn't apparent. Likewise, there is no temperature monitor either. Suspend works really well. The system goes to sleep smoothly and quickly and recovers equally well. Hibernate is a bit confusing. It does appear to work, but it's not any faster than a regular shutdown and startup. It appears exactly as regular shutdown and startup. I don't see any of the telltale standard output of the process and none of the applications in use are restored. The logs offer no clue to the process either. I'm not sure if it's really hibernating or not to be honest.

The Applications

The big draw to Ubuntu Studio is not the hardware support but the collection of software included. Although the internet and office applications are almost non-existent, the multimedia programs fill their respective menu subheadings to the brim. The office applications include OpenOffice.org 2.2 Writer and Scribus. The internet apps are Gaim 2.0beta5, Terminal Server Client, and Firefox 2.0.0.3. There are a few movie plugins and javascript included, but flash and java aren't.

        


The graphics choices are well rounded and containing the basics to the more advanced. Of course The Gimp is included but it's just the tip of the iceberg. Also included are Agave, Blender, Cinepaint, FontForge, F-Spot, gThumb, Hugin, Inkscape, Stopmotion, Synfig Studio, and Xsane. The only problem encountered with this group was with Fontforge that seemed to crash out within seconds of starting.

        


The Sound and Video menu is overflowing. I didn't even realize so many sound and music applications existed. It took two screenshots just to capture the Sound and Video menu. I used six screenshots to give a glimpse of their look. It was amazing. Most of the applications in this menu were sound related but a few video apps include Kino, Totem, PiTiVi, and StopMotion (previously listed under graphics as well).

The sound tools includes mixers (simple system to professional quality), editors, sound servers, keyboard and drum synthesizers, sheetmusic notation editors, sequencers, and players. I've never seen the like before. I'm not qualified to comment on the usability or functionality of these applications but I can say that I had a few apps not open. Those include JAMin, Bitscope, Freebirth, HDSP, Meterbridge, and Patchage.

Some of the included sound apps that did function are Aconnectgui, Ardour, Audacity, BEAST, Creox c, Gtick, Hydrogen, the Jack family, Mixxx, MusE, PureData, QAMix, QSynth, Rosegarden, Seq24, SooperLooper, Sound Recorder, terminatorX, VKeyBd, XMMS, and ZynAddSubFX. I would really be interested in seeing someone experienced in this area, such as Dave Phillips, write up a proper review of Ubuntu Studio. Perhaps he will.

        


One of the areas in which I can speak authoritatively is in video file playback. As installed by default the Totem movie player couldn't handle any of the movie files easily accessible, however a pop-up opened offering to search for the needed codecs. An Add/Remove Applications window opened with its results and with ticking the checkbox and confirming the legalities my chosen codecs were downloaded and installed. This process worked well. Click, click, click and I was in full movie enjoyment.

        


That process was similar in nature to the Restricted Drivers utility. Using this, I could easily install the desirable NVIDIA accelerated graphics drivers for my graphics chip. Again, just a few clicks and a reboot provided this needed functionality. What could be easier? Afterwards a panel applet is present to indicated one has installed restricted software onto the system.

Conclusion

I am truly amazed and delighted with Ubuntu Studio. I'm surprised at my reaction as well. I'm not a big Ubuntu supporter, although I'm not a detractor either. I've just never been all that impressed with Ubuntu. Ubuntu Studio is a different matter. It was attractive and pleasant with some little extra touches that make it seemed very polished and professional. It was fun. What could be more important? Ubuntu Studio is a fun system to use. Hardware detection and support is better than average with my only real problem being with my wireless chip. The included apps are astonishing. What's not included can easily be installed through Synaptic. I think anyone who enjoys Ubuntu could make Ubuntu Studio their own and anyone who hates Ubuntu might change their minds with Ubuntu Studio. I have.

The official webpage is still down right now, but I got my copy from here. I understand there are torrents available and one can access more information on Ubuntu Studio here. I have more screenshots here.


StumbleUpon
Stumble It!

Surprise?

This was relieving to hear after reading a grumpy one. Complete contrast.

I quite like the theme, but it's a matter of taste.

Hope they come out w/an Ubuntu Studio live DVD

Even though the Ubuntu Studio site is still down (overwhelmed), as is the download link to the ISO provided by DistroWatch, it downloads very speedily via bittorrent.

I was disappointed that there's no live DVD edition (at 867.5 MB, the ISO's too big for a CD). I really hope they come out with one. (That's one very nice looking GNOME theme!)

Ndiswrapper

Why the description for ndiswrapper-utils says it's deprecated is beyond me, in fact it has been updated from 1.8 to 1.9 for feisty fawn. I haven't used Studio but I do have Feisty Fawn on this laptop with broadcom wireless and I installed ndiswrapper-utils from the repositories and it worked just fine. That and most of the HOWTO's I've read on ndiswrapper for Ubuntu say to grab ndiswrapper-utils.

re: Ndiswrapper

Zuggy wrote:

Why the description for ndiswrapper-utils says it's deprecated is beyond me, in fact it has been updated from 1.8 to 1.9 for feisty fawn. I haven't used Studio but I do have Feisty Fawn on this laptop with broadcom wireless and I installed ndiswrapper-utils from the repositories

Well, I think that's the rub and the point. I was trying to use the one included on the cdrom as I didn't have an internet connection (at that point) in which to download anything from a remote repo. One hopes the tools included will allow them to do what they need.

debian-installer

"So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind."

Ubuntu studio just uses debian-installer, are you getting it confused with the ubuntu live cd installer (ubiquity?) The reason they don't use a live cd is because trying to edit a movie from a livecd would be terrible in terms of performance.

re: debian-installer

jeremiah wrote:

"So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind."

Ubuntu studio just uses debian-installer, are you getting it confused with the ubuntu live cd installer (ubiquity?)

Naw, I don't think so. When Ubuntu first began gaining wide popularity, one of the things said was that the installer was so easy. (Right?) This was before the livecd /livecd installer was out.

I don't think it is difficult, but it isn't any easier than Slackware's, which is often times said to be harder.

Looks nice...

Great review. I just got Fiesty working the way I like it, but I might just install UbuntuStudio instead just to get that sweet desktop look. Maybe I'll even make some music... j/k

internet connection

hi i'm not being able to connect to the internet with ubuntu studio 7.10 and reinstalling it seems not to be the issue. my live cd of ubuntu 6.10 is not connecting either(never had this problem before)wolvix hunter the same... checking ifconfig all seem ok.but my windows xp x64 is ok. have any ideas to give me? thnx
PS: i have no sound i think with a connection working i will have drivers etc...
in terminal pppoeconf says NOT CONNECTED

great!

well i'm connected now with ubstudio

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Qt 5.11.1 Released

I am pleased to announce that Qt 5.11.1 is released today. As a patch release Qt 5.11.1 does not add any new functionality, but provides important bug fixes and other improvements. New Qt 5.11.1 is first patch release for Qt 5.11 series. There are fixes for over 150 bugs and it contains more than 700 changes compared to Qt 5.11.0. For details of the most important changes, please check the Change files of Qt 5.11.1. And don’t worry if some fix is missing from new Qt5.11.1 release; we are planning to release Qt 5.11.2 at the beginning of September. Read more Also: Qt 5.11.1 Released With 150+ Bug Fixes

Google Ignores Windows and Releases its VR Video Editing Tool for Linux and Mac

Google has launched a new Virtual Reality video editor called VR180 Creator. Surprisingly, it is available for Linux and macOS, not Windows. Read more

today's leftovers

  • 6th Birthday of It’s FOSS: Win Linux Laptop, Stickers and more Gifts
  • Five Useful Features That Are On Their Way To The Chrome OS
  • HackUp is a Desktop Hacker News Client for Linux
    Avid readers of social news sharing site Hacker News might be interested in a new app recently added to Flathub. Called HackUp, it is a Hacker News desktop client written in Vala. It lets you browse and read Hacker News submissions without needing to open a web browser (which for a legendary procrastinator like me, is a good thing).
  • Why use Chef for automation and orchestration
    Chef has been a leading open source tool for automating the provisioning and configuration of servers for the better part of a decade. In recent years the company added InSpec and Habitat to the portfolio, open source projects that automate policy compliance testing and the deployment and configuration of applications, respectively. The company’s flagship commercial offering, Chef Automate, brings all of these pieces together.  
  • Xfdesktop 4.13.2 Released As Another Step Towards Xfce 4.14
    As another step towards the long-awaited Xfce 4.14 desktop environment release, Xfdesktop 4.13.2 is now available as the latest development release for this important piece of the Xfce desktop stack. Xfdesktop is the component that manages the desktop background, the pop-up list of applications, drawing icons on the desktop, etc. Xfdesktop 4.13.2 is the first development release since Xfdesktop 4.13.1 one year ago.
  • Monday Markdown
    I’ve spent the first portion of the coding period focused on improving the documentation browser for GNOME Javascript. In 2015/16 ptomato began porting GIR sources (the source of most GJS documentation) to [DevDocs.io], an open-source documentation browser, using g-ir-doc-tool in gobject-introspection. He did excellent work and produced a functioning product that now lives at [devdocs.baznga.org]. My goals were to take the current product and incorporate GNOME theming, fix issues with incorrect documentation, rebase the project on upstream, and reorient some of the project’s features to better serve an object oriented and GNOME model.
  • Refactor: Backend and UI
    Fractal is currently structured into two parts: The API part (fractal-matrix-api) and GTK part (fractal-gtk). The first one mostly just does the https calls to the Matrix server, the GTK part does everything else. This post will not talk about the API part since that will remain more or less the same (at least for now).
  • Open source board lets you analyze SPI connections on a USB-connected laptop
    Excamera Labs has launched an open source, $27 and up “SPIDriver” board on Crowd Supply for analyzing and testing SPI-connected displays, sensors, flash, and other components on a laptop or via a built-in color LCD display. Monitoring SPI devices such as LCD panels, LED arrays, sensors, and SPI flash may not be quite as gnarly as managing I2C gizmos, but either of these short-distance, serial data transfer protocols can be a hassle. While Arduino boards provide libraries for SPI monitoring, there’s still a lot of guesswork involved due to lack of real-time feedback about the SPI bus state.
  •  
  • Cooperative Learning
    I’ve got some under-utilised KVM servers that I could use to provide test VMs for network software, my original idea was to use those for members of my local LUG. But that doesn’t scale well. If a larger group people are to be involved they would have to run their own virtual machines, use physical hardware, or use trial accounts from VM companies. The general idea would be for two broad categories of sessions, ones where an expert provides a training session (assigning tasks to students and providing suggestions when they get stuck) and ones where the coordinator has no particular expertise and everyone just learns together (like “let’s all download a random BSD Unix and see how it compares to Linux”). [...] There is a Wikipedia page about Cooperative Learning. While that’s interesting I don’t think it has much relevance on what I’m trying to do. The Wikipedia article has some good information on the benefits of cooperative education and situations where it doesn’t work well. My idea is to have a self-selecting people who choose it because of their own personal goals in terms of fun and learning. So it doesn’t have to work for everyone, just for enough people to have a good group.
  • Chinese search giant Baidu creates an open-source A.I. for detecting cancer
    “We hope this open-sourced algorithm can serve as a high-quality baseline for future research in this area,” Li said. “The algorithm is only evaluated on a limited number of public datasets at this stage. However, the algorithm needs to be further assessed using much more clinically relevant data to prove it still maintains higher accuracy than experienced pathologists. Our team will continue improving the algorithm and collaborating with researchers with whom we can share new datasets.”
  • Fynd organizes Hackxagon Open Source Challenge for its Engineers
    As an initiative to give back to the open source community, Fynd, the unique fashion e-commerce portal had launched gofynd.io, a few months ago. This project enabled the engineers of the fashion e-commerce portal to learn new technologies, improve the core infrastructure and enhance the Fynd platform.
  • Netfilter Workshop 2018 Berlin summary
    Lots of interesting talks happened, mostly surrounding nftables and how to move forward from the iptables legacy world to the new, modern nft framework. In a nutshell, the Netfilter project, the FLOSS community driven project, has agreed to consider iptables as a legacy tool. This confidence comes from the maturity of the nftables framework, which is fairly fully-compliant with the old iptables API, including extensions (matches and targets).
  • Using W10Privacy To Boost Ubuntu WSL Performance On Windows 10
  • Get the latest in libre from the FSF Bulletin
    The biannual Free Software Foundation (FSF) Bulletin is now available online. We hope you find it enlightening and entertaining!
  • Introducing PyInstaller
    If you're used to working with a compiled language, the notion that you would need to have a programming language around, not just for development but also for running an application, seems a bit weird. Just because a program was written in C doesn't mean you need a C compiler in order to run it, right? But of course, interpreted and byte-compiled languages do require the original language, or a version of it, in order to run. True, Java programs are compiled, but they're compiled into bytecodes then executed by the JVM. Similarly, .NET programs cannot run unless the CLR is present. Even so, many of the students in my Python courses are surprised to discover that if you want to run a Python program, you need to have the Python language installed. If you're running Linux, this isn't a problem. Python has come with every distribution I've used since 1995. Sometimes the Python version isn't as modern as I'd like, but the notion of "this computer can't run Python programs" isn't something I've had to deal with very often.
  • Demoting multi-factor authentication
    Authentication was done via a Java applet, as there needs to be a verifiably(?)-secure way to ensure the certificate was properly checked at the client without transfering it over the network. Good thing! [...] Anyway I accepted, as losing so much time to grade is just too much. And... Yes, many people will be happy. Partly, I'm releieved by this (I have managed to hate Java for over 20 years). I am just saddened by the fact we have lost an almost-decent-enough electronic signature implementation and fallen back to just a user-password scheme. There are many ways to do crypto verification on the client side nowadays; I know JavaScript is sandboxed and cannot escape to touch my filesystem, but... It is amazing we are losing this simple and proven use case.

Linux, the Linux Foundation and Graphics

  • Linux literally loses its Lustre – HPC filesystem ditched in new kernel
    Linux has literally lost its Lustre – the filesystem favoured by HPC types has vanished in the first release candidate of version 4.18 of the Linux kernel. Linus Torvalds’ announcement of the new release lauds the fact it’s shrunk markedly, much of which can be attributed to the removal of Lustre. “The removal of Lustre may not be all that notable, because it does look like a lot of the development has been happening out of tree, which may be why it never really ended up working as well as people hoped in the staging tree,” Torvalds wrote. “ Greg [ Kroah-Hartman] clearly got pretty frustrated about it, so now it's gone.” How frustrated? Kroah-Hartman explained Lustre's omission by saying it has "been in the kernel tree for over 5 years now" but "has not really moved forward into the 'this is in shape to get out of staging' despite many half-completed attempts."
  • Harmonising open source and standards in the telecom world [Ed: Phone surveillance company pays LF and then (mis)appropriates the “Linux” brand to push its “whitepapers” (marketing)]
    Standards have played a major role in telecommunications technology adoption for many years, validating the commercial viability of new technologies, facilitating multi-vendor interoperability, improving product quality, and expediting the introduction of technologies that would otherwise proliferate in a sea of proprietary alternatives.
  • OpenGL Floating Point Textures No Longer Encumbered By Patents, Enabled In Mesa
    Back in 2012 when talking with Gabe Newell of Valve about open-source/Linux challenges one of the topics he was awed about was patents encumbering the open-source graphics driver progress. Six years later, Timothy Arceri working on the Valve Linux graphics driver team has freed Mesa's ARB_texture_float support from being built conditionally due to these patent fears.
  • Vulkan 1.1.78 Released With Various Issues Resolved
    Vulkan 1.1.78 is now available as the newest version of the Vulkan specification. The Vulkan 1.1.78 spec update is another fairly small update that doesn't introduce any new VK extensions or any major changes. Vulkan 1.1.78 has minor documentation fixes, resumes publishing of the Vulkan 1.0 + KHR extension documentation, clears up some behavior in some Vulkan usage, and other changes.
  • AMDGPU Performance Tests With New WattMan-Like Settings, Power Capping
    With the recent stable debut of the Linux 4.17 kernel, one of the most common performance test requests coming in has been for checking out the Radeon WattMan-like support that was introduced with the Linux 4.17 AMDGPU code for recent generations of Radeon graphics card. Here are some benchmarks of that and on a somewhat related note also some Linux gaming benchmark results when carrying out some power capping tests to restrict the graphics card to a given Wattage.
  • Phoronix Test Suite 8.0.1 Is Coming Next Week
    Just a heads up that Phoronix Test Suite 8.0.1 is slated for release next week if there are any last minute bug reports or requests.