Language Selection

English French German Italian Portuguese Spanish

Ubuntu Studio 7.04 - The Crowning Jewel of the Ubuntu Family

Filed under
Reviews
Ubuntu
-s

Ubuntu Studio 7.04 was finally released yesterday to what seemed like quite a bit of excitement. Ubuntu Studio is a version that focuses on multimedia creation and manipulation with what appears to me as an emphasis on music. At the time of this writing the official website seems to be experiencing a bit of trouble, perhaps due to the high traffic. In any case, sometimes the early bird does gets his worm and this time I was up early.

The Install

The downloadable file was a traditional install cdrom image and utilizes the older Ubuntu ncurses interface. It goes throught the basic steps of gathering information such as keyboard and timezone before starting the partitioning phase. There is the choice of guided or manual partitioning methods. Guided will offer the user pre-prepared choice schemes that will likely entail formatting the whole of the harddrive, whereas manual will allow one to use partitions previously in place or set up their drive as desired. The next step is choosing the software packages. In this case one picks from the major categories Music, Video, Plugins, and Graphics. Choosing all three resulted in a 2.5 gig install. There are a few points when one is asked for their input such as desired screen resolution(s), so don't stray too far while the installer works. Then there is the configuration step. This is short and sweet. It consists of setting up a user account and password, setting up the network connection, and a bootloader. One has the choice of a generic or a low-latency kernel. All in all, it probably took the better part of an hour to complete, but then I kept wandering off only to come back to a screen needing input. So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind.

The System

The resulting system starts with a lovely silent splash. It consists of this colorful background that kinda reminds me of a fallen Christmas tree after two or three too many eggnogs. It's many different bright spots of color. It does have a nice progress bar and the Ubuntu Studio logo, but in at least my case, both were obstructed by the ugly blue verbose rectangle right in the middle. They should just do away with that and let F2 or <esc> take one to the verbose screen. It just kills the whole effect and given that the font is almost the same shade of blue I can't read the output anyway. Next one logs in at an exceptionally nice gdm theme. Again the same color parade background with the options hidden behind a panel with the Options button where one might usually expect to see a menu start button on a desktop screen. And in fact, that's what one gets when it is depressed. A lovely dark-themed menu with blue highlights containing the usual options of sessions, languages, and actions is found. I was enamored with Ubuntu Studio from this point on.

The gnome splash is a customized and tasteful center focal box. Upon first login I was greeted by the startup sound which indicated to me that perhaps my sound was properly auto-detected and configured. The desktop wallpaper seemed like a let down after the colorful introduction. It's a basic neutral gray abstract with areas of varying darker gray blending in and out. However, given the windows theme, it may have been a logical choice. The windec contains a shiny rounded 3D title bar in dark gray or almost black. The theme colors are medium to darkish gray and blue (with aqua-blue tendencies) highlights and progress bars. Despite my lame description, it is really quite attractive and we will probably have to rely on the screenshots to form an accurate picture. Even with the bland wallpaper, the look and feel of Ubuntu Studio gives one a modern and hip yet tasteful interface. The theme is dark, but yet it doesn't seem to cross the line into "too dark." No discernable eye strain was experienced. Suffice to say it's just really cool looking.

Ubuntu Studio comes with a few window and gdm themes as well as a couple of backgrounds and a nice selection of xscreensavers. Many screensavers worked well under vesa and most of the 3D screensavers, save the gl, worked fairly well under "nv." One item of note is the refreshing sound theme. One has the commonly used startup and logout sounds, but with Ubuntu Studio one has cute little non-obtrusive "clicks" when clicking upon applications in the menu or options such as drop-down boxes in applications. Sounds during interface interaction seems to be a trend of the past and it was refreshing to hear audible indicators again. I'm not sure I ever experienced sound during menu interaction before. It was a nice touch adding polish to the package.

One has the usual Preferences and Administration utilities under the familiar Gnome menus. Accessories include a calculator, simple text editor, disk usage analyzer, a search function, and an online dictionary.

Ubuntu Studio comes with a software/system update tool. An applet appears in the upper panel when updates are available. At the time of testing, there were 13 updates available already. When clicking the applet indicator icon an Update Manager window opens listing all the available updates. One can choose install one, all, none, or any combination of the updates. Clicking "Install Updates" installs the updates. The Update Manager also has a "Check" button that can be used to check for updates at any time. The process of installing the 13 updates completed smoothly with no problems here.

The regular package management utility is Synaptic. For those who may not know, Synaptic is a 3-paned graphical application for installing, upgrading, or removing software packages from one's system. It contains a list of categories, individual packages, and information in those pane. It also has a nice search function. As is usually the case, I had no issues with Synaptic. As with the Update Manager, packages are commonly downloaded from a remote mirror. Ubuntu Studio comes with some sources already defined, but if needed there is a Sources utility to add, subtract, or note any package repositories as well. These can include cdrom or local and remote mirror entries.

The foundation is Linux 2.6.20.15, Xorg 7.2.0, gcc 4.1.2 and Gnome 2.18.1.

        




Hardware

The time was set correctly which is a process I once took for granted, but since obtaining my notebook pc, this has become a bit iffy. I don't know the technical reasons, but some distros just do not read the bios clock correctly and I commonly get anything from an hour to a day skew in either direction. It's one of those quirks to which one quickly adjusts (by memorizing time protocol mirror addresses) and additionally forms the basis for another testing criteria. My touchpad was responsive and accurate with none of the disappearing, wandering, blinking, or vibrating cursor effects I've experienced with some other distros. As stated above, my sound was automagically configured and working well with the added bonus of, unlike some other distros, a pleasing default sound volume. Many distros default to muted, which is more desirable to the other default extreme sometimes experienced of blowing one's hair back. This is the first time I was able to successfully setup my remote samba printer using the Gnome graphical utility too.

But the news is not all rosy. One of the lesser issues was that X was setup to use "vesa" at the graphics driver. Whereas it performed well (which again, is not always the case with some of the newer X server implementations), it did limit my viewing resolution to 1024x768. I was able to obtain my desired 1280x800 by switching to "nv."

The main issue that almost brought my review to a screeching halt is, as you probably guessed, wireless support. As I try to reiterate in all my reviews, my chipset is reliant upon Windows drivers. Newer NdisWrapper tools usually allow me to use this hardware and, fairly or unfairly, its implementation is one of the testing criteria I use. I'm not sure why it works in many distros and yet doesn't work in others. I'd say the batting average is roughly better .500. So whereas judging a distro as worthy if I can use this piece of winhardware may not be exactly fair, it's a situation in which many prospective (or current) Linux users find themselves. In the case of Ubuntu Studio I encountered a predicament not previously experienced. When I attempted to install the windows drivers using ndiswrapper I was told at the commandline that I should install the ndiswrapper-common package, which I did. But when I tried again to use ndiswrapper -i /media/win/SWSetup/WLAN/bcmw5l.inf I was told "no ndiswrapper package could be found." There was a bash executable file called /usr/sbin/ndiswrapper, but it was a script to check for the latest version on the system to use and output the error if not found. Looking on the cdrom I found the ndiswrapper-common deb as well as a ndiswrapper-utils. When trying to reinstall them I was told that ndiswrapper-common was already installed and ndiswrapper-utils had be deprecated. So, at this point, I gave up and again, this is usually where my review would have ended. But Ubuntu Studio looked so darn good that I used two 25 foot cables with a router in the middle to hook my laptop (which resides in the living room as opposed to my office/server room) to the internet lifeblood. One good point to mention was the fact that just as soon as inserting that now seemingly ancient rj-45 technology into my laptop's receptacle a popup appeared informing me that I was now connected to the internet. Now I was free to resolve this ndiswrapper debacle.

Battery monitoring is almost a non-issue these days. Every distro, including Ubuntu Studio, seems to correctly display battery life and charging status. Powersaving is another area that is correctly implemented in Ubuntu Studio, scaling back the cpu during times of lesser demand although a monitoring apps isn't apparent. Likewise, there is no temperature monitor either. Suspend works really well. The system goes to sleep smoothly and quickly and recovers equally well. Hibernate is a bit confusing. It does appear to work, but it's not any faster than a regular shutdown and startup. It appears exactly as regular shutdown and startup. I don't see any of the telltale standard output of the process and none of the applications in use are restored. The logs offer no clue to the process either. I'm not sure if it's really hibernating or not to be honest.

The Applications

The big draw to Ubuntu Studio is not the hardware support but the collection of software included. Although the internet and office applications are almost non-existent, the multimedia programs fill their respective menu subheadings to the brim. The office applications include OpenOffice.org 2.2 Writer and Scribus. The internet apps are Gaim 2.0beta5, Terminal Server Client, and Firefox 2.0.0.3. There are a few movie plugins and javascript included, but flash and java aren't.

        


The graphics choices are well rounded and containing the basics to the more advanced. Of course The Gimp is included but it's just the tip of the iceberg. Also included are Agave, Blender, Cinepaint, FontForge, F-Spot, gThumb, Hugin, Inkscape, Stopmotion, Synfig Studio, and Xsane. The only problem encountered with this group was with Fontforge that seemed to crash out within seconds of starting.

        


The Sound and Video menu is overflowing. I didn't even realize so many sound and music applications existed. It took two screenshots just to capture the Sound and Video menu. I used six screenshots to give a glimpse of their look. It was amazing. Most of the applications in this menu were sound related but a few video apps include Kino, Totem, PiTiVi, and StopMotion (previously listed under graphics as well).

The sound tools includes mixers (simple system to professional quality), editors, sound servers, keyboard and drum synthesizers, sheetmusic notation editors, sequencers, and players. I've never seen the like before. I'm not qualified to comment on the usability or functionality of these applications but I can say that I had a few apps not open. Those include JAMin, Bitscope, Freebirth, HDSP, Meterbridge, and Patchage.

Some of the included sound apps that did function are Aconnectgui, Ardour, Audacity, BEAST, Creox c, Gtick, Hydrogen, the Jack family, Mixxx, MusE, PureData, QAMix, QSynth, Rosegarden, Seq24, SooperLooper, Sound Recorder, terminatorX, VKeyBd, XMMS, and ZynAddSubFX. I would really be interested in seeing someone experienced in this area, such as Dave Phillips, write up a proper review of Ubuntu Studio. Perhaps he will.

        


One of the areas in which I can speak authoritatively is in video file playback. As installed by default the Totem movie player couldn't handle any of the movie files easily accessible, however a pop-up opened offering to search for the needed codecs. An Add/Remove Applications window opened with its results and with ticking the checkbox and confirming the legalities my chosen codecs were downloaded and installed. This process worked well. Click, click, click and I was in full movie enjoyment.

        


That process was similar in nature to the Restricted Drivers utility. Using this, I could easily install the desirable NVIDIA accelerated graphics drivers for my graphics chip. Again, just a few clicks and a reboot provided this needed functionality. What could be easier? Afterwards a panel applet is present to indicated one has installed restricted software onto the system.

Conclusion

I am truly amazed and delighted with Ubuntu Studio. I'm surprised at my reaction as well. I'm not a big Ubuntu supporter, although I'm not a detractor either. I've just never been all that impressed with Ubuntu. Ubuntu Studio is a different matter. It was attractive and pleasant with some little extra touches that make it seemed very polished and professional. It was fun. What could be more important? Ubuntu Studio is a fun system to use. Hardware detection and support is better than average with my only real problem being with my wireless chip. The included apps are astonishing. What's not included can easily be installed through Synaptic. I think anyone who enjoys Ubuntu could make Ubuntu Studio their own and anyone who hates Ubuntu might change their minds with Ubuntu Studio. I have.

The official webpage is still down right now, but I got my copy from here. I understand there are torrents available and one can access more information on Ubuntu Studio here. I have more screenshots here.


StumbleUpon
Stumble It!

Surprise?

This was relieving to hear after reading a grumpy one. Complete contrast.

I quite like the theme, but it's a matter of taste.

Hope they come out w/an Ubuntu Studio live DVD

Even though the Ubuntu Studio site is still down (overwhelmed), as is the download link to the ISO provided by DistroWatch, it downloads very speedily via bittorrent.

I was disappointed that there's no live DVD edition (at 867.5 MB, the ISO's too big for a CD). I really hope they come out with one. (That's one very nice looking GNOME theme!)

Ndiswrapper

Why the description for ndiswrapper-utils says it's deprecated is beyond me, in fact it has been updated from 1.8 to 1.9 for feisty fawn. I haven't used Studio but I do have Feisty Fawn on this laptop with broadcom wireless and I installed ndiswrapper-utils from the repositories and it worked just fine. That and most of the HOWTO's I've read on ndiswrapper for Ubuntu say to grab ndiswrapper-utils.

re: Ndiswrapper

Zuggy wrote:

Why the description for ndiswrapper-utils says it's deprecated is beyond me, in fact it has been updated from 1.8 to 1.9 for feisty fawn. I haven't used Studio but I do have Feisty Fawn on this laptop with broadcom wireless and I installed ndiswrapper-utils from the repositories

Well, I think that's the rub and the point. I was trying to use the one included on the cdrom as I didn't have an internet connection (at that point) in which to download anything from a remote repo. One hopes the tools included will allow them to do what they need.

debian-installer

"So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind."

Ubuntu studio just uses debian-installer, are you getting it confused with the ubuntu live cd installer (ubiquity?) The reason they don't use a live cd is because trying to edit a movie from a livecd would be terrible in terms of performance.

re: debian-installer

jeremiah wrote:

"So actual working time may be less. It's not a difficult installer to navigate, but how it became known far and wide as the most user-friendly still boggles my mind."

Ubuntu studio just uses debian-installer, are you getting it confused with the ubuntu live cd installer (ubiquity?)

Naw, I don't think so. When Ubuntu first began gaining wide popularity, one of the things said was that the installer was so easy. (Right?) This was before the livecd /livecd installer was out.

I don't think it is difficult, but it isn't any easier than Slackware's, which is often times said to be harder.

Looks nice...

Great review. I just got Fiesty working the way I like it, but I might just install UbuntuStudio instead just to get that sweet desktop look. Maybe I'll even make some music... j/k

internet connection

hi i'm not being able to connect to the internet with ubuntu studio 7.10 and reinstalling it seems not to be the issue. my live cd of ubuntu 6.10 is not connecting either(never had this problem before)wolvix hunter the same... checking ifconfig all seem ok.but my windows xp x64 is ok. have any ideas to give me? thnx
PS: i have no sound i think with a connection working i will have drivers etc...
in terminal pppoeconf says NOT CONNECTED

great!

well i'm connected now with ubstudio

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

today's leftovers

  • State of Linux Containers
    In this video from the Stanford HPC Conference, Christian Kniep from Docker Inc. presents: State of Containers. “This talk will recap the history of and what constitutes Linux Containers, before laying out how the technology is employed by various engines and what problems these engines have to solve. Afterward, Christian will elaborate on why the advent of standards for images and runtimes moved the discussion from building and distributing containers to orchestrating containerized applications at scale. In conclusion, attendees will get an update on what problems still hinder the adoption of containers for distributed high performance workloads and how Docker is addressing these issues.”
  • ONS 2018: Networking Reimagined
    For the past seven years, Open Networking Summit (ONS) has brought together the networking industry’s ecosystem of network operators, vendors, open source projects, leading researchers, and investors to discuss the latest SDN and NFV developments that will shape the future of the networking industry. With this year’s event, taking place March 26-29, 2018 in Los Angeles, ONS will evolve its approach as the premier open source networking event. We’re excited to share three new aspects of this year’s ONS that you won’t want to miss:
  • AT&T contributes code to Linux open source edge computing project
    The Linux Foundation recently announced a new project, dubbed Akraino, to develop an open source software stack capable of supporting high-availability cloud services for edge computing systems and applications. To kick off the project, AT&T will contribute code made for carrier-scale edge computing applications running in virtual machines and containers.
  • AT&T Brings Akraino Networking Project to Edge of the Linux Foundation
    The Linux Foundation has been particularly busy in 2018 thus far consolidating its existing networking project under a single umbrella, known as LF Networking. That umbrella might need to get a bit larger, as on Feb. 20 the Linux Foundation announced the new Akraino project, with code coming initially from AT&T.
  • FreeOffice 2016 – An Efficient Alternative to Microsoft Office
    FreeOffice 2016 is the latest version of the Office software from SoftMaker. In fact, you wouldn’t be wrong if you called it the free version of SoftMaker Office 2018 seeing as it features the same suite of applications.
  • Stellaris 2.0 'Cherryh' patch & Stellaris: Apocalypse expansion released, over 1.5 million copies sold
    Stellaris: Apocalypse [Steam], the latest expansion for the grand space strategy game from Paradox Development Studio is out. The big 2.0 'Cherryh' patch is also now available. Paradox has also announced today, that Stellaris has officially passed 1.5 million copies sold making it one of their most popular games ever made. I'm not surprised by this, as I consider Stellaris their most accessible game.
  • Action-packed platformer with local and online co-op 'Vagante' has left Early Access
    After being in Early Access for quite some time, the action-packed platformer 'Vagante' [Steam, Official Site] has now officially left Early Access.
  • Gentoo has been accepted as a Google Summer of Code 2018 mentoring organization
  • Getting Debian booting on a Lenovo Yoga 720
    I recently got a new work laptop, a 13” Yoga 720. It proved difficult to install Debian on; pressing F12 would get a boot menu allowing me to select a USB stick I have EFI GRUB on, but after GRUB loaded the kernel and the initrd it would just sit there never outputting anything else that indicated the kernel was even starting. I found instructions about Ubuntu 17.10 which helped but weren’t the complete picture. What seems to be the situation is that the kernel won’t happily boot if “Legacy Support” is not enabled - enabling this (and still booting as EFI) results in a happier experience.
  • Dell PowerEdge T30
    I just did a Debian install on a Dell PowerEdge T30 for a client. The Dell web site is a bit broken at the moment, it didn’t list the price of that server or give useful specs when I was ordering it. I was under the impression that the server was limited to 8G of RAM, that’s unusually small but it wouldn’t be the first time a vendor crippled a low end model to drive sales of more expensive systems. It turned out that the T30 model I got has 4*DDR4 sockets with only one used for an 8G DIMM. It apparently can handle up to 64G of RAM.
  • Quad-Ethernet SBC and controller tap new Renesas RZ/N1D SoC
    Emtrion’s Linux-ready “SBC-RZN1D” SBC, which will soon power a “Flex2COM” controller, features a Renesas dual-core -A7 RZ/N1D SoC and 4x LAN ports, and is designed for multi-protocol fieldbus communications. Emtrion, which recently announced its emCON-RZ/G1H module based on an octa-core Renesas RZ/G1H SoC, has unveiled a Renesas based, quad-LAN port SBC-RZN1D SBC focused on industrial communication. The SBC-RZN1D taps the Renesas RZ/N1D (R9006G032), one of a new line of RZ/N1D SoCs launched last year by Renesas for industrial multi-protocol communications. Renesas recently collaborated with Avnet to ship its own dual-Ethernet Renesas RZ/N1D Solution Kit (see farther below).
  • Postage-Stamp Linux
    There was a time when big operating systems ran on big iron. IBM, Data General, Burroughs, DEC, and other computer makers built big machines with big, blinking lights, and big price tags. They ran grown-up software and they supported multiuser operating systems. If you wanted a toy, you built a microcomputer. If you wanted a real machine for serious work, you bought a mainframe. Maybe a minicomputer, if it were for lesser tasks.
  • Most Popular Android Versions In February 2018 (Always Updated List)
    Android is the most used operating system on the planet. In fact, it’s almost omnipresent in the mobile ecosystem. Even the Android versions, like Nougat, Marshmallow, Lollipop, etc. have been able to build their individual fan following.

Red Hat and Fedora: David Egts, Radcom, Google Summer of Code 2018, FOSS Wave

  • Red Hat’s David Egts: Microservices Tech Could Help Simplify App Deployment
    David Egts, chief technologist for Red Hat’s public sector, told MeriTalk in an interview published Wednesday that the microservices technology works to help the developer split complex, large applications into small components and share them with other members of the DevOps team.
  • Radcom partners with Red Hat for NFV management
    Radcom announced it is collaborating with Red Hat to provide operators with a fully virtualized network visibility solution running on Red Hat OpenStack Platform. As operators transition to NFV, a critical first step is gaining end-to-end network visibility. This collaboration enables operators to attain cloud-native network visibility without the hassle of building their own private cloud infrastructure, the vendor said. Once the operator's transition to NFV matures, integration efforts with the NFV and MANO infrastructure can be simplified.
  • The Markets Are Undervaluing these stock’s: Red Hat, Inc. (RHT), Xerox Corporation (XRX)
  • Meeder Asset Management Inc. Has $1.75 Million Holdings in Red Hat Inc (RHT)
  • Justin W. Flory: Humanitarian open source work: My internship at UNICEF
    In December, I received the happy news of an offer for a internship position at UNICEF in the Office of Innovation. The Office of Innovation drives rapid technological innovation by rapid prototyping of new ideas and building full-stack products to make a positive impact in the lives of children. This is a simple answer, but a more detailed description is on our website. My internship at UNICEF is unique: I support open source community engagement and research as my primary task for the MagicBox project. For years, I’ve done this in open source communities in my free time (namely SpigotMC and Fedora), but never in a professional role. As I navigate my way through this exciting opportunity, I plan to document some of the experience as I go through blogging. My intent is that my observations and notes will be useful to someone else in the humanitarian open source space (or maybe to a future me).
  • Fedora participating in Google Summer of Code 2018
    GSoC is a summer program aiming to bring more student developers into open source software development. It enables students to spend their summer break working with open source organizations on projects proposed by participating organizations and supported by mentors.
  • FOSS Wave with Fedora at KGISL, Coimbatore
    Recently, I was invited by Prem to NASSCOM to give a brief talk on FOSS and Technology as part of the FOSS Wave community. Prem is doing a great job there by putting his effort in helping students from Tier2 and Tier3 cities. Around twenty enthusiastic students were selected and invited to Bengaluru to take part in such events. Mine was one of them. I conducted a GitHub session after Intro to FOSS and a brief intro about Fedora Project.

OSS Leftovers

  • Comment: Many happy returns to open source
    Twenty years ago the phrase “open source” was first used and the development of software – and hardware – was changed forever. Very few designers today will not use some element of open source software in their development projects.
  • Percona Unveils Full Conference Session Schedule for the Annual Percona Live Open Source Database Conference 2018
  • Worth seeing in Barcelona: Open source for white box vRAN solutions
    News this week from cloud and carrier infrastructure platform company Kontron builds on our earlier coverage of the emerging virtual radio access network (vRAN); a promising technology that could help the evolution to 5G by maximising available bandwidth while lowering costs. The market for open vRAN solutions is gaining wider acceptance as operators seek more cost-effective approaches to network architectures and deployment. According to analyst firm Research and Markets, the growth of the vRAN market is expected to grow at a CAGR of approximately 125 per cent during the next three years.
  • Barcelona is the first city council to join the FSFE's "Public Money? Public Code!" campaign
  • Earlham Institute releases open source software to help identify gene families
    Researchers at Earlham Institute (EI) have released ‘GeneSeqToFamily’, an open-source Galaxy workflow that helps scientists to find gene families based on the ‘EnsemblCompara GeneTrees’ pipeline. Published in Gigascience, the open source Galaxy workflow aims to make researchers job of finding find gene families much easier.
  • 3 reasons to say 'no' in DevOps
    DevOps, it has often been pointed out, is a culture that emphasizes mutual respect, cooperation, continual improvement, and aligning responsibility with authority. Instead of saying no, it may be helpful to take a hint from improv comedy and say, "Yes, and..." or "Yes, but...". This opens the request from the binary nature of "yes" and "no" toward having a nuanced discussion around priority, capacity, and responsibility.
  • 5 rules for having genuine community relationships
    As I wrote in the first article of this three-part series on the power and importance of communities, building a community of passionate and committed members is difficult. When we launched the NethServer community, we realized early that to play the open source game, we needed to follow the open source rules. No shortcuts. We realized we had to convert the company in an open organization and start to work out in the open.
  •  
  • Rust Typestates
    A long time ago, the Rust language was a language with typestate. Officially, typestates were dropped long before Rust 1.0. In this entry, I’ll get you in on the worst kept secret of the Rust community: Rust still has typestates.
  • It's Time To Do CMake Right
    Not so long ago I got the task of rethinking our build system. The idea was to evaluate existing components, dependencies, but most importantly, to establish a superior design by making use of modern CMake features and paradigms. Most people I know would have avoided such enterprise at all costs, but there is something about writing find modules that makes my brain release endorphins. I thought I was up for an amusing ride. Boy was I wrong.

OpenBSD Gets Mitigated For Meltdown CPU Vulnerability

  • OpenBSD Gets Mitigated For Meltdown CPU Vulnerability
    A few days back FreeBSD 11 stable was mitigated for Meltdown (and Spectre vulnerabilities), which came more than one month after these nasty CPU vulnerabilities were disclosed while DragonFlyBSD was quickly mitigated and the first of the BSDs to do so. While OpenBSD is known for its security features and focus, only today did it land its initial Meltdown mitigation.
  • Meltdown fix committed by guenther@

    Meltdown mitigation is coming to OpenBSD. Philip Guenther (guenther@) has just committed a diff that implements a new mitigation technique to OpenBSD: Separation of page tables for kernel and userland. This fixes the Meltdown problems that affect most CPUs from Intel. Both Philip and Mike Larkin (mlarkin@) spent a lot of time implementing this solution, talking to various people from other projects on best approaches.

    In the commit message, Philip briefly describes the implementation [...]