Language Selection

English French German Italian Portuguese Spanish

Vector Linux 5.9: Light, fast Slackware-based distro

Filed under
Reviews

Introduction

Vector Linux 5.9, released in late December of last year, is a Slackware 12.0-based distribution that uses Xfce 4.4.2 as its default user interface ("UI"). Generally speaking, Xfce requires less horsepower than other UIs, like GNOME and KDE, and so Vector Linux ("VL" for short) bills itself as an excellent operating system to install on older, lower-powered computers. I've been using it for the past two weeks, and like what I see.

VL comes in several free (i.e. "download the ISO and burn it yourself") and non-free flavors. If you want to try VL before installing it, there's also a live CD available. VL also produces a KDE-based "SOHO" edition, currently at version 5.8; and they're working on a 64-bit version of VL 5.9 Standard, which is in beta as of this writing. Both the Standard and SOHO versions come in for-purchase "Deluxe" versions, which include extra software and email support. They're available at the VL CD store.


"Built-in" Xfce utilities

Installation

After trying out the live CD, I downloaded VL 5.9 Standard, a roughly 676 MB ISO, burned it to CD, and booted from it, using its default kernel. VL's installation procedure uses a guided, ncurses-based UI, just like Slackware. But that's about where the similarity ends.

Roughly, VL installation follows these steps:

  • Create/resize partitions with cfdisk, if this hasn't already been done prior to installation. You're required to have at least a swap and a root partition, but can add others (e.g. /home);
  • Choose the partition(s) on which you'll install VL;
  • Select the software packages you wish to install (I chose to install everything, except for the Opera web browser — pretty much all of the software is optional, except for the base system);
  • Format the partitions and install the software;
  • Install the bootloader, LILO (this is also optional, in case you've already got another bootloader installed);
  • Choose the method of mounting removable media — HAL or Vector Linux's own pre-HAL "VL-Hot" method (from my experience, HAL seems to work more reliably, especially with KDE, if you're going to install it later);
  • Set up hardware;
  • Set up the root and user accounts; and, finally,
  • Reboot into Vector Linux.

Someone's taken the time and effort to put up screenshots of the entire VL installation process on Flickr, for your viewing pleasure.

Among other things, VL 5.9's installer offered to install the proprietary NVIDIA video drivers for my video card (and added the necessary entries to /etc/X11/xorg.conf to allow compositing effects). If you've got an Ethernet card connected to a router or cable modem that uses DHCP, your basic network setup will be "automagically" configured.

I already use GRUB as a bootloader, controlled by another distribution, so I chose not to install LILO. It was easy to add the requisite stanza to boot up VL. Putting "vga=791" and "splash=verbose" parameters in GRUB's "kernel" line allowed VL to boot using its nice bootsplash theme. Overall, installation is very quick — it took approximately 20 minutes both times I tried it. On my box, a full installation consumed just over 4 GB of hard disk space.

Since I have "plain vanilla" hardware, the only thing I needed to configure after installation (other than my printers) was /etc/fstab. (The file is well-commented with examples.) None of my existing Linux partitions were automatically written into /etc/fstab, so I added them manually after creating mount points for them in /mnt.

VL also installs NTFS-3g for read-write access to Windows NTFS partitions. During the installation process, you're asked if you have an existing partition to share between Windows and Linux. I have two NTFS partitions and one FAT32 partition. One quirk I found was that, the first time I installed VL, I didn't specify a partition to share, and it automatically wrote both NTFS partitions and the FAT32 partition into /etc/fstab, using the NTFS-3g driver for read/write access to the NTFS partitions. The second time I installed VL, I told it to use /dev/hda1 as my shared "/mnt/win" partition. The installer put a mountpoint for it into /etc/fstab using the read-only ntfs driver, and missed the other two partitions. YMMV.

Instead of doing it manually, I could have used Vector's own system configuration tool, "VASM," to set up mount points. (A bit more about VASM below.)

Software and software management

VL offers a large selection of software from which to choose. As noted above, most of the software, other than the base system, is optional. (If you intend to run a server, you don't have to install X Windows or a window manager if you don't want to.) Out of the box, it comes with:

  • Kernel 2.6.22.14; gcc 4.1.2; X.org 1.4.0;
  • Networking applications, among which are Firefox 2.0.0.11; Seamonkey 1.1.7; the Transmission bittorrent client; the XChat IRC client; pyNeighborhood (for LAN browsing); NMap and NMapFE (the latter is a GUI for NMap); the Chestnut modem dialer; and some tools written by the VL team for WiFi connections (I didn't test these);
  • Office applications, including ABIWord; Adobe Reader 8; Gnumeric (spreadsheet); JPilot (for Palm device connectivity); and Scribus (for desktop publishing);
  • Editors, including the Bluefish HTML editor; and medit, a programmer's text editor;
  • Multimedia applications, including K3b for CD/DVD burning; ripperX, for ripping tracks from music CDs to MP3; MPlayer; XMMS; and Xine (commercial DVDs played just fine in Xine, complete with menus); and
  • Several games, including Chromium; PlanetPenguin Racer; and Pysol.

     

VL also comes with fairly comprehensive end-user documentation. You can peruse it from the CD before you install VL, or afterwards, from your hard disk, via the desktop icon. (It's also available online). They have a forum as well as a knowledge base (from which paid help is available).

Vector uses Slackware's package management tools — "pkgtool," "installpkg," and friends. It also comes with slapt-get and its Synaptic-like GUI front-end, Gslapt, preconfigured with the Vector and Slackware repositories. Vectorite volunteers frequently add new packages to the Vector repositories, but if you simply can't find a piece of software you need, other than making a request for it in the Vector forums, you can always try SlackBuilds.org (which is where I went to get the SpliX CUPS drivers for my Samsung laser printer).

 
Gslapt and vpackager (Vector's "build-your-own-package" utility); compiling a program

Vector comes with several of its own repositories ("packages" and "extra" are enabled in Gslapt by default; you may wish to enable "patches" and "testing"). You can install everything from OpenOffice.org 2.3.1 to KDE 3.5.8 in its entirety. Installation is simply a matter of selecting the packages in Gslapt and pressing the "Execute" button. If you want GNOME, it looks like you'll need to download and run the Dropline GNOME installer.

Vector comes with its own system configuration tool (similar to openSUSE's YaST), named "VASM" (for "Vector Administrative and Services Menu"). (What an impressive acronym. I set my hostname to "vector.org.vasm" as a tribute to their creativity.) Vector's installer was so good at setting up the system that I really haven't needed to use it, other than as an easy way to access CUPS, the printing system. VASM includes tools for such things as administering your network access; your hardware; partitions and mountpoints; system services; and so on. (VASM seems to come in three interfaces: an ncurses-based one, accessible from a regular console window; an older, less-graphical version, called by the command "vasm"; and a newer, prettier version accessed by the "vasmcc" command. The functionality seems to be the same.)


VASMCC and VASM

More features

Some nice touches specific to Vector Linux include a button on the toolbar that asks you to select your favorite browser the first time you press it; access to Gslapt and other system utilities from the VASM button on the toolbar; and wbar ("Warlock's Bar"), a Mac-like application launcher (it's available in the "Accessories" submenu).

It should also be mentioned that VL comes with a plethora of browser plug-ins pre-installed, so that you can watch Flash-based movies, view scalable vector graphics (SVG) files, listen to Real Audio streams, and view Java applets and Adobe Acrobat (.pdf) files in Firefox, out of the box.

For those who use audio, video, and DVD applications, there's also a freely-downloadable Vector Linux Multimedia Bonus Disk with a huge selection of multimedia software.

Finally...

One thing I personally don't like about "stock" Xfce is its sort of bland-looking interface. As it turns out (and as long-time Xfce users already know), that can be changed. Since Xfce 4.4.2's built using GTK+ 2.0, it's very easy to download and install GTK2 theme engines like Murrine and Aurora from xfce-look.org. Add a new wallpaper and a new set of icons, and you can radically alter Xfce's look and feel.

   
 
Screenshots of Vector Linux using the Aurora theme engine

I like Vector Linux a lot, mainly for its speed and its ease of set-up and use. (It's also been interesting for this die-hard KDE fan to get to know Xfce.) Congratulations to the VL team for a job well done.

— Andrew Heil

(For an interesting comparison to another Slackware-based distro using Xfce, see Susan's recent review of Zenwalk Linux 5.0.)

Edit, 2/13/08: Vector Linux released a new "Light" version on 2/11/08, meant for installation on really low-powered PCs. Please don't confuse that release with the term "light" in this review's title.




Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Great review, but I'd have...

...a few questions.

1. In VasmCC, when you click on "Hardware Config", do you get the same error like with the LiveCD? http://beranger.org/blogo8/vasmcc2.png

2. Isn't it strange to have xine-ui but to lack gxine, when even Slackware has gxine?

3. Have you tried the module supposed to patch the new kernel vulnerability? (novmsplice-1.0_2.6.22.14-i586-1vl59)

4. Why should I be using a Slackware-like distro, being it nicer, if it can't hibernate, just like Slack can't? (Other XFCE-based distros have Suspend and Hibernate out-of-the-box in the xfce logout screen -- e.g. xubuntu :-J)

Otherwise, kudos for the theming notes!

Here are some guesses...

Béranger wrote:
1. In VasmCC, when you click on "Hardware Config", do you get the same error like with the LiveCD? http://beranger.org/blogo8/vasmcc2.png

Now that's a loaded question. Smile It doesn't look like an "error;" it looks like the way the utility's meant to be run. In other words, they want you to log out of Xfce, switch to a console, go to runlevel 3, and then run VASM > HARDWARE > HWCONF.

Béranger wrote:
2. Isn't it strange to have xine-ui but to lack gxine, when even Slackware has gxine?

I've never seen the need to use another Xine "front end." You can certainly install it from the Slackware repos, if you want to.

Béranger wrote:
3. Have you tried the module supposed to patch the new kernel vulnerability? (novmsplice-1.0_2.6.22.14-i586-1vl59)

Yes, "novmsplice" installed fine using slapt-get. Haven't run the "proof of concept" code to test it, though.

Béranger wrote:
4. Why should I be using a Slackware-like distro, being it nicer, if it can't hibernate, just like Slack can't? (Other XFCE-based distros have Suspend and Hibernate out-of-the-box in the xfce logout screen -- e.g. xubuntu :-J)

Another loaded question. No one's saying you "should be" using any particular distro.

I've never used suspend or hibernate on this desktop computer; I simply turn it off if I'm going to be away from it for a while. Wish I had enough space on my laptop to play with other distros; then suspend and hibernation would matter more.

That said, if you have the kernel source installed, and do a "locate tuxonice", you'll see it's there. So is the /usr/sbin/hibernate script. After adding "resume=swap:/dev/hdb3" to GRUB and running /usr/sbin/hibernate, it seems to work OK -- but not from within X windows. The proprietary nvidia driver's blacklisted. There's probably a way around that.

Béranger wrote:
Otherwise, kudos for the theming notes!

That was the fun part!

Forgot to mention: If you want to add Vector's "unstable" repo, you have to put it into Gslapt by hand.

Self-answering...

...to the hibernation issue: the GOLD edition has TuxOnIce.

But then:
(1) Does it mean that the GOLD (paid) edition hibernates from XFCE too?!
(2) Can't TuxOnIce be added to the standard edition? (What packages to install/replace?)

Corrections and answers (mainly Béranger's concerns)

"Gold" simply means release code in Vector Linux. So... Vector Linux 5.9 Standard Gold is the free edition. It doesn't cost anything and DOES include TuxOnIce. Hibernation works fine in the free (Standard) edition. The paid edition is called "Deluxe", BTW.

When I tried gxine recently I found it buggy. I also found that it consumed more memory than plain old xine. That may explain the choices as Vector Linux is meant to be lightweight and fast.

novmsplice works. I've tested it. If you're security conscious you should probably also grab the Seamonkey 1.1.18 and Firefox 2.0.0.12 packages plus any language packs you need out of "testing". (It's not called "unstable" in Vector Linux.)

There is a bug in the Standard edition -- the "patches" repository is not enabled by default. You'll want to enable that one too.

I hope this helps.

Thanks + a few replies

-- Mea culpa, it was indeed DELUXE I was thinking of.

-- If "Hardware Config" was NOT supposed to be run from X, then WHY IS THAT BUTTON SHOWING UP? It should have been disabled and only shown in the CLI version.

-- A hibernation that doesn't work from within X is useless. As long as I can close ALL the X apps I was using, I can very well shutdown the system! Or maybe it works from an xterm, but it doesn't add any button in the XFCE logout dialog.

-- gxine was always buggy, but it seems that Patrick likes it, and so do I Smile I simply CAN'T use xine, the same way I can't use mplayer with the default theme: their GUIs are designed with ANTI-USABILITY in mind, no standard menus, etc. This is why I prefer gxine to xine, and a different mplayer skin, no matter what distro I am using.

Is Vector *officially* compatible with Slackware 12.0 repos? I couldn't see such an official assertion.

Respones

AFAIK Tux on Ice DOES work within Xfce. You are correct that the Hibernate button on the shutdown menu included in Ubuntu is missing in VL. I have no idea why but I agree with you that VL would be more user friendly if it was there. Right now you do have to invoke it from a terminal session.

I also agree that there are some missing desktop files to create menu entries and one or two (including hardware config) that shouldn't be there. It's a minor point but I can see why you'd find it annoying.

gxine vs. xine is a matter or preference. I'm comfortable with xine and the bugs in gxine (including freeze ups) really got in the way for me.

VL is Slackware compatible. Enabling the repos in gslapt or slapt-get is NOT recommended as it tends to create dependency hell and duplicate entries for the same app. slapt-get and gslapt are only guaranteed to automagically handle dependencies with VL repositories, not with third party sources. Having said that, there is nothing at all wrong with grabbing the occasional Slackware package and installing it.

vpackager also allows repackaging anything in Cruxports4Slack in a nice, easy to use GUI. That makes a ton of additional software available.

I should also point out that there is a huge backlog of packages in the testing repository and the repositories in general seem to grow on a daily basis. New, previously missing apps show up all the time. It's still nowhere near what is offered for Ubuntu or Fedora but it's been getting closer and closer for over a year now.

I have yet to find the perfect distro. I can find flaws in every one of them. I know you've read my reviews on O'Reillynet and I consider them all mixed reviews. Some are just more positive than others. All in all I do thing VL is one of the best choices out there for the desktop for a reasonably experienced Linux user. I know you have more than a little experience from my time at Red Hat Smile

Great distro

Nice and compact review, which covers the basics. I also use Vector linux (but mostly, about 90 percent of the time, i use puppy linux), and i think it's a great distro. It has almost anything you might need out-of-the-box. (Openoffice is in the repositories)

The best media players are included, plus you can download a special media disk with lots of video/audio apps and libs.

As this distro is aimed at the littlebit more experienced user (but also for the newbie) they should have included some more graphical programming tools (like geany, graphical diff checkers and stuff like that), or even an ide. But ofcourse you can install them yourself.

I like their vpackager tool to create packages from source (i know there are more cli apps like that, but i just like the fact they included a gui version)

Ending this with the remark that i like their choice of apps. Their selection consist mostly of apps that are small and startup quickly, Just like i'm used to with puppy linux. which makes it one of the fastest distro's around.

edit: extra remark: Due to the lack of harddisk encryptiontools this Vector 5.9 version is not really suited for a laptop installation (if your laptop get's stolen, the thief has all your personal data). Even for a desktop install it's a real issue not having harddisk encryption available.

More in Tux Machines

Tizen News

OSS Leftovers

  • How Open Source Tech Helps Feds Solve Workforce Turnover Issues
    Just as a mainframe from decades ago might be ready for retirement, the IT staff who originally procured and installed that system might also be preparing for a new phase in their lives. It’s up to the current and next generation of government IT employees to prepare for that eventuality, but there are indications they may not be ready, despite evidence that older IT professionals are retiring or will soon be leaving their positions. Unfortunately, a skills gap exists even among younger generation IT workers. Agencies are scrambling to find personnel with expertise in cloud service management, cybersecurity, technical architecture and legacy technologies, such as common business-oriented language (COBOL) and mainframes, among other areas. At the same time that many workers are getting ready to retire, leaving behind a wealth of knowledge, many younger IT professionals are struggling to gain the knowledge they will need to take their agencies into the future.
  • Introducing Fn: “Serverless must be open, community-driven, and cloud-neutral”
    Fn, a new serverless open source project was announced at this year’s JavaOne. There’s no risk of cloud lock-in and you can write functions in your favorite programming language. “You can make anything, including existing libraries, into a function by packaging it in a Docker container.” We invited Bob Quillin, VP for the Oracle Container Group to talk about Fn, its best features, next milestones and more.
  • Debian seminar in Yokohama, 2017/11/18
    I had attended to Tokyo area debian seminar #157. The day’s special guest is Chris Lamb, the Debian Project Leader in 2017. He had attended to Open Compliance Summit, so we invited him as our guest.
  • Overclock Labs bets on Kubernetes to help companies automate their cloud infrastructure
    Overclock Labs wants to make it easier for developers to deploy and manage their applications across clouds. To do so, the company is building tools to automate distributed cloud infrastructure and, unsurprisingly, it is betting on containers — and specifically the Kubernetes container orchestration tools — to do this. Today, Overclock Labs, which was founded two years ago, is coming out of stealth and announcing that it raised a $1.3 million seed round from a number of Silicon Valley angel investors and CrunchFund — the fund that shares a bit of its name and history with TechCrunch but is otherwise completely unaffiliated with the blog you are currently reading.
  • MariaDB Energizes the Data Warehouse with Open Source Analytics Solution
    MariaDB® Corporation, the company behind the fastest growing open source database, today announced new product enhancements to MariaDB AX, delivering a modern approach to data warehousing that enables customers to easily perform fast and scalable analytics with better price performance over proprietary solutions. MariaDB AX expands the highly successful MariaDB Server, creating a solution that enables high performance analytics with distributed storage and parallel processing, and that scales with existing commodity hardware on premises or across any cloud platform. With MariaDB AX, data across every facet of the business is transformed into meaningful and actionable results.
  • AT&T Wants White Box Routers with an Open Operating System [Ed: AT&T wants to openwash its surveillance equipment]
    AT&T says it’s not enough to deploy white box hardware and to orchestrate its networks with the Open Network Automation Platform (ONAP) software. “Each individual machine also needs its own operating system,” writes Chris Rice, senior vice president of AT&T Labs, Domain 2.0 Architecture, in a blog post. To that end, AT&T announced its newest effort — the Open Architecture for a Disaggregated Network Operating System (dNOS).
  • Intel Lands Support For Vector Neural Network Instructions In LLVM
  • p2k17 Hackathon report: Antoine Jacoutot on ports+packages progress
  • GCC 8 Feature Development Is Over
    Feature development on the GCC 8 compiler is over with it now entering stage three of its development process. SUSE's Richard Biener announced minutes ago that GCC 8 entered stage three development, meaning only general bug fixing and documentation updates are permitted.
  • 2018 Is The Year For Open Source Software For The Pentagon
  • Open-source defenders turn on each other in 'bizarre' trademark fight sparked by GPL fall out
    Two organizations founded to help and support developers of free and open-source software have locked horns in public, betraying a long-running quarrel rumbling mostly behind the scenes. On one side, the Software Freedom Law Center, which today seeks to resolve licensing disputes amicably. On the other, the Software Freedom Conservancy, which takes a relatively harder line against the noncompliance of licensing terms. The battleground: the, er, US Patent and Trademark Office. The law center has demanded the cancellation of a trademark held by the conservancy.
  • Open Source Underwater Glider: An Interview with Alex Williams, Grand Prize Winner
    Alex Williams pulled off an incredible engineering project. He developed an Autonomous Underwater Vehicle (AUV) which uses a buoyancy engine rather than propellers as its propulsion mechanism and made the entire project Open Source and Open Hardware.

Programming Leftovers

Security: Linux, Free Software Principles, Microsoft and Intel

  • Some 'security people are f*cking morons' says Linus Torvalds
    Linux overlord Linus Torvalds has offered some very choice words about different approaches security, during a discussion about whitelisting features proposed for version 4.15 of the Linux kernel. Torvalds' ire was directed at open software aficionado and member of Google's Pixel security team Kees Cook, who he has previously accused of idiocy. Cook earned this round of shoutiness after he posted a request to “Please pull these hardened usercopy changes for v4.15-rc1.”
  • Free Software Principles
    Ten thousand dollars is more than $3,000, so the motives don't add up for me. Hutchins may or may not have written some code, and that code may or may not have been used to commit a crime. Tech-literate people, such as the readers of Linux Magazine, understand the difference between creating a work and using it to commit a crime, but most of the media coverage – in the UK, at least – has been desperate to follow the paradigm of building a man up only to gleefully knock him down. Even his achievement of stopping WannaCry is decried as "accidental," a word full of self-deprecating charm when used by Hutchins, but which simply sounds malicious in the hands of the Daily Mail and The Telegraph.
  • New warning over back door in Linux
    Researchers working at Russian cyber security firm Dr Web claim to have found a new vulnerability that enables remote attackers to crack Linux installations virtually unnoticed. According to the anti-malware company, cyber criminals are getting into the popular open-source operating system via a new backdoor. This, they say, is "indirect evidence" that cyber criminals are showing an increasing interest in targeting Linux and the applications it powers. The trojan, which it's calling Linux.BackDoor.Hook.1, targets the library libz primarily. It offers compression and extraction capabilities for a plethora of Linux-based programmes.
  • IN CHATLOGS, CELEBRATED HACKER AND ACTIVIST CONFESSES COUNTLESS SEXUAL ASSAULTS
  • Bipartisan Harvard panel recommends hacking [sic] safeguards for elections
     

    The guidelines are intended to reduce risks in low-budget local races as well as the high-stakes Congressional midterm contests next year. Though most of the suggestions cost little or nothing to implement and will strike security professionals as common sense, notorious attacks including the leak of the emails of Hillary Clinton’s campaign chair, John Podesta, have succeeded because basic security practices were not followed.  

  • Intel Chip Flaws Leave Millions of Devices Exposed
     

    On Monday, the chipmaker released a security advisory that lists new vulnerabilities in ME, as well as bugs in the remote server management tool Server Platform Services, and Intel’s hardware authentication tool Trusted Execution Engine. Intel found the vulnerabilities after conducting a security audit spurred by recent research. It has also published a Detection Tool so Windows and Linux administrators can check their systems to see if they're exposed.