Language Selection

English French German Italian Portuguese Spanish


Filed under

In my continuing search to find a binary gentoo installer, one that will install a complete working system in much the same manner as SuSE, Mdv, or PCLOS from a graphical environment that I can then rebuild for my arch/system/requirements at my leisure, I tried RR4-2.65.1 this morning. RR4 is a livedvd "designed to transform a computer into a powerful Gentoo Linux system in less than 5 minutes," according to description provided to DistroWatch.

I've been a loyal gentoo user for little over two years now and have installed per stage 1 about 4 or 5 times. My server on which this site is run is one example. But I've been looking for a graphical environment from which to install gentoo, a way to encourage others to install gentoo without having to read pages and pages of documentation. I've tried several distros/methods lately, and none have yet to equal the functionality I found in Litrix.

The system starts out really impressive. I booted the livedvd and was given the option of just hitting enter or perusing several booting options. Then the silent boot features a lovely splash that utilizes a kde-like progress of highlighting icons rather than a progress bar and all accented by the lovely gentoo purple color scheme. The verbose boot looks just like my everyday gentoo system booting - a variation on the regular linux boot you've all probably seen many many times. A beautiful desktop greets you and lulls you into a sense of confidence. The desktop appears so polished and refined. The menus are chocked full of useful applications and tools. The fonts are great looking and performance is amazing (considering it appears built for i386). It features a 2.6.14-r2 kernel and uses a 6.99 of Xorg. The crowning jewel is the installer. It's the whole point.


Yes, it's a mighty fine livedvd and if that's your desire, then they have you covered. I don't recall when I've seen such full menus. But at 2.4 gigs, the iso should be complete. It contains not only KDE 3.4, but also gnome and some other lighter window environments.

However, knew there was going to be a "however" didn't you, however, the installer bombs out here. It's a beautiful piece of software. It features a lovely windec and exquisite widgets. The fonts are gorgeous. Options seem insightful and complete. I was quite impressed. Too bad it don't work.

The installer begins with a graphical configuration which walks one through all the options. Partitioning if needed, naming / partition, networking, type of install, use flags and chost options, root passwd and useradd are just some of the steps. Among the choices for type of system are the standard stage 1, stage 2, stage 3 and install the livedvd. If you chose any of the stages you can choose your USE flags, arch and chost. It defaults to stage 3, but I chose install the livedvd my first attempt, figuring this would be the fastest and easiest. After configuration and clicking "install," the installer outputs root password is setup, then stops. I waited quite a while before checking with top to make sure it wasn't doing anything. I waited some more to make sure even though the hard drive light was still not blinking. Eventually I decided "welp, I guess that didn't work."


My second attempt was to use its default of stage 3. I restarted the installer and chose that and proceded to spend about an hour choosing my USE flags, chost and arch. When I clicked on athlon-xp the X server crashed and sent me back to the login. That's when I said, "pffffttt, I ain't trying no more!"

I visited the forum before my first attempt for help in deciding which type of install to use. No real information was found on that topic, but I did see some reports of successful installs, mostly using the "almost gentoo method," and even some posts about destroyed partition tables. No damage was inflicted here, but no system resulted either.

Second thought, I wasn't quite ready to give up yet as it turned out. Upon typing the text for this article, I became aware that I really hate having to state that a distro doesn't work, but I must obey my journalist integrity. So, I decided to give RR4 one more chance. I went through the whole shebang again, spending not quite the same amount of time considering the USE flags. It still just stopped at setting the passwords. I was bummed.


So, in the end I'm left to state that the RR4 gentoo-installer is still non-functional. It states clearly on their homepage that rr4 is still alpha so one can't really complain too much. It is impressive at this point and one to keep an eye on. If anyone has a "it works for me" story, I encourage you to please share your comments or, even better, your own blogged review.

So, my quest continues...

More in Tux Machines

today's leftovers

  • Google Patches All Intel Chromebooks Against Spectre Variant 2 with Chrome OS 65
    Google released a new stable version of its Linux-based Chrome OS operating system for Chromebooks, build 65.0.3325.167 (Platform version: 10323.58.0/1) bringing the Meltdown and Spectre mitigations to more devices and a bunch of other improvements.
  • VIDEO: Cooking With Linux: Lots and Lots of Word Processors! The Tuesday Linux Journal Show
  • How to use netstat in GNU/Linux
  • Cutelyst 2 released with HTTP/2 support
    Cutelyst the Qt/C++ web framework just got a major release update, around one and half year ago Cutelyst v1 got the first release with a stable API/ABI, many improvements where made during this period but now it was time to clean up the mistakes and give room for new features.
  • Fedora 28 and GNOME 3.28: New Features for Eastern Europe
    This time this is not fake, edited, patched, nor a custom build from COPR but the real screenshots of the unmodified downstream Fedora 28 planned to be released on May 1 this year. Here is how the default calendar widget in GNOME Shell looks in Greek, Polish, and Ukrainian:
  • Stephen Smoogen: /usr/bin/whoami
  • Debian CEF packages
    I've created some Debian CEF packages—CEF isn't the easiest thing to package (and it takes an hour to build even on my 20-core server, since it needs to build basically all of Chromium), but it's fairly rewarding to see everything fall into place. It should benefit not only Nageru, but also OBS and potentially CasparCG if anyone wants to package that.
  • Reproducible builds folks: Reproducible Builds: Weekly report #151
  • Porting L4Re and Fiasco.OC to the Ben NanoNote (Part 1)
    For quite some time, I have been interested in alternative operating system technologies, particularly kernels beyond the likes of Linux. Things like the Hurd and technologies associated with it, such as Mach, seem like worthy initiatives, and contrary to largely ignorant and conveniently propagated myths, they are available and usable today for anyone bothered to take a look. Indeed, Mach has had quite an active life despite being denigrated for being an older-generation microkernel with questionable performance credentials. But one technological branch that has intrigued me for a while has been the L4 family of microkernels. Starting out with the motivation to improve microkernel performance, particularly with regard to interprocess communication, different “flavours” of L4 have seen widespread use and, like Mach, have been ported to different hardware architectures. One of these L4 implementations, Fiasco.OC, appeared particularly interesting in this latter regard, in addition to various other features it offers over earlier L4 implementations. Meanwhile, I have had some success with software and hardware experiments with the Ben NanoNote. As you may know or remember, the Ben NanoNote is a “palmtop” computer based on an existing design (apparently for a pocket dictionary product) that was intended to offer a portable computing experience supported entirely by Free Software, not needing any proprietary drivers or firmware whatsoever. Had the Free Software Foundation been certifying devices at the time of its introduction, I imagine that it would have received the “Respects Your Freedom” certification. So, it seems to me that it is a worthy candidate for a Free Software porting exercise.
  • Samsung Announces Galaxy Tab Active2, a Rugged Android Tablet for Mobile Workers
    Samsung announced today the Galaxy Tab Active2 rugged Android tablet designed for mobile workers conducting business outdoors in industrial locations, under harsh weather, and other difficult conditions.

Games Leftovers

  • Atari reboots Ataribox as Atari VCS, teases April pre-order date
    Legendary game company Atari set retro hearts aflutter last year when it launched an Indiegogo crowdfunding campaign for something called the Ataribox, a living room device running Linux and supposedly combining the features of a PC with a video game console -- complete with some Atari classic games. But the December 14 pre-order date Atari set was abruptly canceled after an unspecified technical issue, and it looked like the Ataribox would never reach any actual customers. This week, however, the company has emerged at the Game Developers Conference with some very similar hardware, albeit with a new name.
  • The Rocket League 'Spring Fever' event is live promising lots of flower power
    Ready to earn some more cosmetic items? The Spring Fever event in Rocket League [Steam] is now live and you can earn yourself some new items using Flowers you earn while playing like this:
  • Epic Games releases the assets from Paragon, for Unreal Engine developers
    In a move that's both surprising and rather welcome, Epic Games has decided to release the assets from their FPS MOBA Paragon for Unreal Engine developers, since they're shutting it down. This will include 20 AAA-quality characters, with their respective skins, animations, VFX and dialogue, along with over 1,500 environment components from Paragon. Here's where it's a bit insane, this all cost Epic Games around $12 million! It's pretty insane how much it costs to make AAA-like games now—eye watering.
  • Game engine Construct 3 adds a remote preview, new runtime is coming to improve game performance
    I'm a huge fan of drag and drop creation tools like Construct 3 [Official Site], that allow you to create games by building simple events sheets and it seems they've continued making Construct 3 more awesome to use.
  • Open-source re-implementation of RollerCoaster Tycoon 2 'OpenRCT2' has a fresh update
    Miss the days of playing RollerCoaster Tycoon 2? Miss them no more, as OpenRCT2 [GitHub, Official Site] is alive and well with a fresh update. Like many open source game engines, it allows you to play RollerCoaster Tycoon 2 on systems not designed for it—like Linux. Naturally, it comes with tons of improvements like user interface theming, fast-forwarding gameplay, multiplayer and so on.
  • Zombasite - Orc Schism, the expansion to the action RPG is out adding more content
    Here's one I sadly missed, released back in December (oh my!), Zombasite - Orc Schism [Steam, GOG] is an expansion to the dynamic zombie apocalypse action RPG.

GNOME: GitLab Migration and More

  • IMPORTANT: GitLab mass migration plan
    I know some fellows doesn’t read desktop-devel-list, so let me share here an email that it’s important for all to read: We have put in place the plan for the mass migration to GitLab and the steps maintainers needs to do.
  • ED Update – week 11
  • Reflections on Distractions in Work, Productivity and Time Usage
    For the past year or so I have mostly worked at home or remote in my daily life. Currently I’m engaged in my master thesis and need to manage my daily time and energy to work on it. It is no surprise to many of us that working using your internet-connected personal computer at home can make you prone to many distractions. However, managing your own time is not just about whipping and self-discipline. It is about setting yourself up in a structure which rewards you for hard work and gives your mind the breaks it needs. Based on reflections and experimentation with many scheduling systems and tools I finally felt I have achieved a set of principles I really like and that’s what I’ll be sharing with you today. [...] Minimizing shell notifications: While I don’t have the same big hammer to “block access to my e-mail” here, I decided to change the order of my e-mail inboxes in Geary so my more relevant (and far less activity prone) student e-mail inbox appears first. I also turned off the background e-mail daemon and turned off notification banners in GNOME Shell. [...] Lastly, I want to give two additional tips. If you like listening to music while working, consider whether it might affect your productivity. For example, I found music with vocals to be distracting me if I try to immerse myself in reading difficult litterature. I can really recommend Doctor Turtle’s acoustic instrumental music while working though (all free). Secondly, I find that different types of tasks requires different postures. For abstract, high-level or vaguely formulated tasks (fx formulating goals, reviewing something or reflecting), I find interacting with the computer whilst standing up and walking around to really help gather my thoughts. On the other hand with practical tasks or tasks which require immersion (fx programming tasks), I find sitting down to be much more comfortable.

OSS, Openwashing and FUD