Language Selection

English French German Italian Portuguese Spanish

Stx 1.0 r2: He Wanted Testers!...

Filed under
Linux
Reviews
-s

To quote DistroWatch, "STX Linux is a Slackware-based distribution featuring the light-weight Equinox Desktop Environment and suitable for installation on older computers." Stibs released version 1.0 rc2 yesterday as announced on DistroWatch and PcLinuxOnline. They state:

* Mostly complete Linux Desktop
* Lightweight (about 1.1 GB installed, 368 MB ISO)
* Slackware 10.2 based (Slax Kernel 2.6.13.2) with Slapt-Get and Gslapt
* EDE 1.0.4 desktop w/ Gnome system tools (FRGnome base) * Works nicely on old Hardware (Oldest system tested so far: K5/75, 64 MB RAM, 130 MB Swap ... very slow but works)
* Harddisk Installer from Pocketlinux
* Very much like Windows(TM) 98/2000 - means easy switching.

I was a slightly intrigued when I saw the announcement on DistroWatch for Stx, but I was quite a bit behind in my projects for the weekend so I didn't really pay much attention to it until I saw the announcement on PcLinuxOnline. There STIBS posted his announcement as a request for "Distro testers wanted ..." This got my attention. When I read the information posted, all other reviews like Frugalware and Foresight would have to wait. This project sounded very interesting.

And very interesting it was. The installer was very much like the slackware installer I've seen numerous times now. The project page speaks of a livecd, but this iso came in the form of a hard drive installer. It was an easy install asking only a few question and none about package choices. There was no user setup or network config or any of the advance options we saw with KateOS. However, the system does come with a "demo" user, so you can still use it right away. If all hardware detection goes as planned and if you don't have a video chipset not properly supported by Xorg, one is booted to a graphical login manager. Type in the username: demo with the password: demo and you're off to the races. Once inside you can set up your normal user if desired. But I'm getting ahead of myself. ...The install was a no brainer.

Booting goes really well and the hardware detection was excellent. Although sitting on a 2.4 kernel, everything functioned as hoped, except that same nasty 'detecting my add-in ethernet card first' again. I'm going to have to yank that joker outta here! But printer detection went well and my scanner was auto-configured for me. Sound worked - really well, as did xmms (which sometimes doesn't in some of these distros).

After login, one is pleasantly ushered into the Equinox Desktop Environment. I got my first taste of ede when I installed it on my LFS install. I liked it then, and I like it now. It's very cute, lightweight, and very functional - a lot of nice options. I often wondered why more distros didn't choose this desktop and I think it was an excellent choice for Stx. And because it is so badly overlooked, it's a welcome change. ...Something different. It was very stable with nary a crash or freeze experienced. Kudos! Another good thing, the reboot and shutdown options worked in the logoff dialog of ede. Mine were grayed out in that same mentioned LFS.

The list of available applications was quite impressive for a 350mb download. It included the whole suite of mozilla. Mozilla is being thrown over these days for counterparts like Firefox and Flock, however, Mozilla is still the only one that comes with a complete suite of applications like a webpage builder, address book, irc client, and mail and newgroup. Again an excellent choice I think.

        

The gaming suite of The Ace of Penguins is included to help waste your valuable time. I think this was another intuitive choice in that it offers so much in one complete and uniform package. One can play mojahnog, minesweeper, solitaire, Freecell, or pegged.

The office catagory is headlined by TextMaker and PlanMaker as we similarly saw in Berry. As stated then, I really like Textmaker because of its lightweight and rock solid performance. Another insightful choice on the part of Stibs. Perusing the forums, I saw this information concerning TextMaker.

Textmaker 2002 which is included is freeware, Planmaker is crippleware free to use. You can only edit 1 sheet but I haven't found something better yet which doesn't require half of Gnome ...

STIBS

This is either a new development, or something I overlooked when putting together my LFS install. In addition, it may be possible this is the case with Berry, that I reported as a time-limited demo. In any case, this is a wonderful development. No more deleting the /textmaker directory and reinstalling every 30 days for me now. Big Grin (oppps, did I just say that?)

Some of the graphic applications include a pdf viewer, Xfi image viewer, Inkscape, flphoto picture album. Others include gimp and xsane. I thought gimp wasn't included, but saw it in the slapt-get repositories. But then was confused by it's offer to "re-install" it instead of installing. I installed (upgraded to) 2.3.5 before I saw the errata:

I missed a Symlink for Gimp: After login to STX, open a terminal, su to root and: ln -s /usr/bin/gimp-2.3 /usr/bin/gimp .

        

Multimedia was hit and miss. Xmms worked wonderfully, but I had trouble with xine wanting to play any movie files I had. I messed around in the config for a while, but didn't have much luck. Stx comes with aumix and ede has its own mixer as well. Graveman is included for cd and dvd burning. There wasn't much in the way of browser plugin support, however jre is installable thru gslapt.

Internet applications include gaim, putty, gFTP, D4X, and LinNeighborhood among a few others as well as the above mentioned mozilla suite for irc, contacts, and such.

Another great find was XFE, X File Explorer, a file manager. Where was this when I was setting up my LFS? Big Grin But it's a real nice file manager for its size and fits in with ede really well as if it was a native app. In fact, it may be now, I need to check on that. (note to self: check on that.)

Then there's all this other neato stuff, in the areas of utilities, system tools and whatnot.

        

Amongst the many regular user applications found in Stx, is one stand-out, their own Stx Control Center. This is a really nice looking application that contains many useful system utilities, monitors, and configuration tools. Included inside the control center as well as alone in the menu is gslapt. If you haven't heard of it, it's a package manager for the slackware system based on, resembling, and functioning similarly to synaptic. It uses slapt-get for the back-end, again a slackware counterpart to Debian's apt-get. I'm not sure what was up with it, but it had slackware/current repositories setup for use, but many applications I searched for didn't show up. I'm going to have to add some more repositories to mine here I guess. In addition, from the control center one can add users, configure their net connection (dsl or dial-up), their display, monitor their system and so much more. Here's but a taste, other screenshots in the gallery.

        

        

One big drawback of the system was no compiler. In addition, with the repositories provided, there wasn't one in gslapt either. I think this is one area Stibs might seriously need to give some thought. A slack-based system, even with slapt-get, needs to come with a compiler. They don't always install from a package manager completely functional. Given the current size of the iso of ~350mb, I don't think the added mbs required would make much difference and it's really needed. (hint hint)

Another, perhaps personal preference, is the name. Stx needs an updated name. I kept pronouncing it "stux" and we already have a stux. s-t-x don't exactly roll off the tongue either and just didn't stick in my head. I think Stibs' Linux would be cool. Well... just a thought...

So, I guess you can probably tell that I, as a representative of Tuxmachines, can say that Tuxmachines really liked Stx Linux. ...We really really liked Stx Linux. ...a lot. It was an easy install, required little user configuration, complete for its size, light, fast, stable, fun and the fonts were gorgeous. I think his choices in applications show an almost eerie insightfulness rare in small distro developers. He states that he had it running on a p1 with 64 mb ram, if I can find or make a boot floppy for it, I'm gonna test this baby on my old laptop. Great job Stibs, I loooved it!

Download yours.

My Screenshots and Theirs.

Stx Linux Homepage.

slight corrections:

- Kernel is 2.6.13.2 from Slax
- boot floppy image is in /bootfloppy on the CDROM 2gether w/ rawrite (give your old laptop a spin =)

What really interests me, is what problems did you have with videos? In Moz is the GXine plugin registered, Flash is also installed (about:plugins). I played mpegs and wmv's from my harddisk and it didn't mutter (didn't test ram's and mov's). Maybe we can solve this 4 u quickly if you tell me a bit more about it =).
Thanx for this great review!
STIBS
PS:atang1, thx for pointing out the compressed fs option!

Re: slight corrections:

stibs wrote:

- Kernel is 2.6.13.2 from Slax

I coulda swore when I did a uname -a, it came back 2.4.something like 29. I'll double check when I get back from work this afternoon.

stibs wrote:

- boot floppy image is in /bootfloppy on the CDROM 2gether w/ rawrite (give your old laptop a spin =)

Cool! I haven't had time to look to hard yet, but was gonna check out the iso directories in hope. wonderful. I need a binary replacement for gentoo on that old laptop. It just can't handle all the compiling anymore. :D[/quote]

stibs wrote:

What really interests me, is what problems did you have with videos? In Moz is the GXine plugin registered, Flash is also installed (about:plugins). I played mpegs and wmv's from my harddisk and it didn't mutter (didn't test ram's and mov's). Maybe we can solve this 4 u quickly if you tell me a bit more about it =).

I couldn't say. All it kept saying was something like, 'this file ain't an asx format.' I just kinda figured the libraries weren't present. I was using vesa, so perhaps that had something to do with it. But then again, on the other hand, vesa usually does video just fine, even if sometimes in some distros, the player may drop frames. I've always found xine to be hit or miss. Mplayer almost always works.

I'll double check those browser plugins as well. I didn't look at the list or anything, I just went to a couple sites and got that 'place holder' image deal like when a plugin is needed.

stibs wrote:

Thanx for this great review!

STIBS


PS:atang1, thx for pointing out the compressed fs option!

Thank you.

Re: slight corrections:

srlinuxx wrote:
stibs wrote:

- Kernel is 2.6.13.2 from Slax

I coulda swore when I did a uname -a, it came back 2.4.something like 29. I'll double check when I get back from work this afternoon.

Ohhh, ok, I see where I musta got that impression... the (stripped down) kernel source is 2.4.31 in /usr/src. Well, I'm redfaced now. Big Grin

Sorry.

One of these days I'll post a review without major mistakes. Big Grin

Re: Difficulties...

> Wizzards in the instalation script

An FLTK based installer for graphical installation process is in the making. When I use xvesa it should perform on most hardware quite nicely. Screenshots: http://blog.mikeasoft.com/2005/09/23/stx-installer/

> several versions of STX can be selectively installed on different vintage of computers.

Problem for me is, I don't have enough resources and I don't want to make it too commercial that I need a company behind me as well as I don't want it become a BIG open source project.

> If hardware is more advanced, then more programs from a kpackage repository or CnR warehouse can add more power like Linspire.

Something like that is planned as well as FTP install facilities, even for low spec hardware.

Thx for all your suggestions =)
STIBS

Re: Difficulties...

stibs wrote:

> Wizzards in the instalation script

An FLTK based installer for graphical installation process is in the making. When I use xvesa it should perform on most hardware quite nicely. Screenshots: http://blog.mikeasoft.com/2005/09/23/stx-installer/

wooosh! that looks slick! ...can't wait.

Re: Open source or proprietary for STX ?

atang1 wrote:
If you are near San Francisco, talk to some venture capital people who will steal your company.

Rofl, thank goodness I'm at the opposite side of the world. Germany here. /me doesn't have to beat the Bushes, we can ignore them mostly.

atang1 wrote:
If you do get big money, don't forget us at Tuxmachines who work with you to make better Linux thru proprietary information technology.

Never =)

STIBS

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Keeping a Web Site Safe and Available With or Without a CDN

PostgreSQL

THE site Tux Machines is and has been online for over 15 years. It has not suffered security-related incidents. The same is true for Techrights, which soon turns 13. Tux Machines uses Gallery and Drupal, whereas Techrights uses MediaWiki, WordPress and Drupal. WordPress is its most important component as it contains over 26,000 posts. Tux Machines has about 130,000 nodes in Drupal. We don't use a CDN as we have a reasonably powerful server that can cope with the load on its own. For security we use best practices and keep critical issues plugged. I was recently asked for advice on these matters and explained things as follows.

There are mainly two types of attacks (maybe three if one includes social engineering, e.g. tricking a citizen journalist/blogger/administrator into a trap): 1) capacity-based, e.g. DDOS attack 2) exploiting vulnerabilities to degrade/compromise site's quality of service (similar to (1) above but not the same), access site data (confidential), spy on people (writers/staff/visitors) without them being aware. WordPress runs lots of stuff and powers a lot of the Web, maybe 20% (or more) of today's Web sites. It's regularly checked for security issues and bugs are regularly fixed. Updates can be set to automatic, which means they happen in the background without user intervention. I check the site for updates several times per day, e.g. this one from yesterday. I've used WordPress for 15 years as an early adopter and developer. What's known as the "core" of WordPress is generally secure if kept up to date, manually or automatically (for large sites it might make sense to apply patches manually to reduce risk of unnoticed incidents and enable quality control, patch assessment etc). It's also important to keep the underlying operating system and pertinent packages like PHP (programming language), mysql/psql (WordPress and Drupal typically use MariaDB or MySQL as the database, but PostgreSQL should be possible too) and Apache (there are simpler alternatives e.g. NGINX for Web server) up to date. If we get to keep everything up to date, and moreover we don't install WordPress extensions that cannot be trusted or are no longer maintained (or scarcely maintained), we should be OK. The social engineering part involves stuff such as phishing, e.g. someone sending out an E-mail in an attempt to obtain passwords of privileged users. If you use a CDN for content distribution, e.g. CloudFlare, then availability will be mostly down to the CDN company. WordPress generates pages on the fly (dynamic), but it has caching mechanisms that can be further improved with extensions. The CDN likely obviates the need for those. So, if the site is receiving 'too many' requests, the CDN can probably scale to deal with that (maybe a more expensive protection plan). I peronsally would never use CloudFlare (for a lot of reasons), but to many people it's the only CDN that 'counts' or exists. Brand recognition perhaps.

Security and BSD Leftovers

  • Security updates for Wednesday

    Security updates have been issued by Arch Linux (go, go-pie, pacman, and xpdf), CentOS (java-1.7.0-openjdk, java-1.8.0-openjdk, java-11-openjdk, and patch), openSUSE (gcc7), Red Hat (firefox, kernel, and qemu-kvm-rhev), Slackware (mozilla), SUSE (kernel, libcaca, openconnect, python, sysstat, and zziplib), and Ubuntu (libxslt, linux-azure, and linux-lts-xenial, linux-aws).

  • os-release file appears

    There’s now (well, for DragonFly 5.7 users) an /etc/os-release file to show the installed DragonFly version.

  • samsung ativ book 9

    Physically, it’s in the ultraportable category with a 12 inch screen and weighing about two pounds. It’s a completely fanless design, using an M-5Y31 CPU (Broadwell generation). My model came with 8GB RAM and 256GB SSD, but it’s possible to find some with half that. Everything is a bit tiny and compromised, so in my opinion it wouldn’t make for a good all around machine (like the Carbon X1), but if space and weight is at a premium, it’s a good substitute.

    I immediately installed OpenBSD 6.6 when it arrived and have been using it for a few days. I have a few complaints, and I’m not confident in recommending it, but no regrets.

Ubuntu Touch OTA-11 Release

Kugi has outdone himself this time. With this update you'll find a new way to edit text via the Ubuntu Touch on-screen keyboard: the Advanced Text Functions. Using this feature, you can move around your typed text, undo and redo actions, move around a text selection rectangle, and use the cut/copy/paste commands, all from the same overlay. To get started, press and hold the space bar! We are still unsure about the discoverability of this feature, so stay tuned for changes that will make it even easier to find and use! This update also adds the option of a Dvorak keyboard layout for the refined OSK user. The PR included fixes to allow multiple keyboard layouts to share the same correction dictionary and word overrides. Huge thanks, zoenb! Rounding off the updates to the keyboard are improvements to the Polish layout, removing some diacritics that are not used in the language (Thanks, Daniel20000522!); the same treatment for the French-Swiss layout (Thanks, wilfridd!); and a tweak to the Japanese layout so that it respects your settings better (Thanks, Fuseteam!). If you'd like to get in on the keyboard-improving action, Tallero added instructions for building and testing the keyboard to its Readme at https://github.com/ubports/keyboard-component. Read more Also: UBports' Ubuntu Touch OTA-11 Released

today's howtos