Language Selection

English French German Italian Portuguese Spanish

Stx Linux 1.0 Final Look

Filed under
Linux
Reviews
-s

Stx Linux is a small lightweight operating system for the x86 arch. It is based on Slackware and slackware derivatives. One of the key features of Stx is it's ability to perform admirably on older hardware, and it's minimum requirements are a pentium 1 with 32 mb ram. Tuxmachines has covered some of the developmental releases, RC2 and RC3, but since final was released today, we felt it deserved yet another look.

The Stx site says, "STX Linux is a desktop Linux distribution especially targeted to older hardware. It also works quite well on new PC's." If you already have an older Stx install, Stibs has made some update patches available here. Today, we will report on a clean install as well as how the patch process went for us on our rc3 install.

The Changelog since rc3 includes:

  • 3 packaged Patches from the download page applied

  • Installer corrected for creating an fstab that allows normal users to mount cdrom and floppy drives
  • The usual package updates
  • Included Elleo's hacked eworkpanel with notification area
  • Included recompiled pyfltk (XFT font rendering now also in STXCC) Thx Mike
  • GTK 2 and EDE Themes switched to STX for a more uniform appearance, also Thx Mike Wink
  • Included gnome-cups-manager for printer administration (more common than the CUPS web frontend)
  • Included Requiredbuilder for creating dependecy files for Slackware/STX packages

Upgrading Current Install

My first test was upgrading my current rc3 install with the 3 patches made available on the Stx site. The install of the packages went smoothly and the upgrades were indeed implimented. I could see some new features already. Most noticable was the new login splash, wallpapers, and the incorporation of the Stx ede theme. I stated in my article on rc3 that I hoped the viagra logo didn't make it into the distro, but I knew it would. I was right. The new login screen and wallpapers now feature the new Stx logo. The root desktop wallpaper has a big old stop sign with the warning embossed "Think twice before you hit Enter." As you can see the "file splitter" (or menu entry) is now functional.

        

To patch/upgrade a rc3 install, download the 3 patches from the Stx Linux site and issue the command:
installpkg <stxpatches> It probably isn't necessary to reboot, but I did anyway. The process took less than 5 minutes start to finish. The patches are small to download and take a mere seconds to install.

Fresh Install

The installer has been discussed briefly before here on Tuxmachines, but for the newcomer I'll reiterate that it is what I call ascii-graphical. By that I mean that it's not a full blown fancy frame-buffered beauty like one finds in suse or mandriva, but yet it's not a text install demanding manual fdisks, mountings, and confusing commands. It does offer a 'graphical interface' of sorts, yet one uses the keyboard to navigate. It's one of the easiest and fastest installs to date. Missing is setting up a user account, but one is provided a chance to change the root password and a "demo" user (password: demo) is already setup. Once the system is in-place, you can setup a regular user through the Stx Control Panel.

As usual for Stx, the install went without a hitch and a nice light desktop resulted. For those who don't know, Stx features the Equinox Desktop Environment. It's main goal appears to be ease of use within a familiar environment, perhaps for those coming from Windows. Ede looks very much like a Win98 desktop. The newly included default Stx theme continues to appear very windows-like. I don't recall if this is exactly the same Stx theme that's been available on the Ede site for a while, but probably is. ...Which brings up another subject, there are quite a few nice themes available on the Ede site. But I'm getting off-topic.

The big ugly root stop sign wallpaper encountered in the patched system did not appear on the fresh install, but the viagra pill wallpaper did. It's not particularly repellant, but I prefer something with less of a message. I quickly changed my background to one of the others available thru the background settings module. In fact, ede comes with a control panel of its own in which you can change many settings such as the font, theme, and colors. As an aside, the fonts render much better in my fresh install.

Stx comes with lots of great applications for most popular tasks. One can, for example, listen to music, watch videos, surf the internet, answers emails, chat with friends, write a review, take screenshots and manipulate images, play some games, and even write a webpage.

        

        

Another difference in the patched system and the fresh install was the printer setup dialogue. Now that parellel ports detection was working, I clicked on printer setup in the Stx Control Panel. In the patched system, one is offered the browser based cups admin. In the fresh install, a little setup module opens a more familiar applet. They both do pretty much the same thing and both seem to work, but I like the gnome-cups-manager much better.

        

The Stx Control Panel is a really great thing. From there one can configure hardware, (un)install software, configure a network/internet connection, and set some system settings. It's a wonderful application, nice and light and all the modules seem to functional really well.

        

Through the Stx Control Panel one can install software. Stx includes slapt-get and the nice front-end gslapt. Already configured to use a Slackware 10.2 repository, one can, as an example, install jre, eog, or even KDE. I tested it installing jre, eog, and Fluxbox. I wanted eog because the image viewer provided couldn't seem to handle .pngs. In fact, I'd suggest to Stibs replacing Xfi with eog. Slapt worked wonderfully. I didn't even have to restart my browser for java to start working, eog rendered the images with no problems, and Fluxbox started right up. I'm not sure if KDE would go smoothly, perhaps I'll test it later. One needs to be cautious with gslapt/slapt-get as some things listed as installed aren't. Some things listed as not install are. So I "which binaries" and "locate libraries" before each installation to make sure. I'm guessing the "installed software" list slapt-get is using is left from Stibs' development system and it's not exactly accurate. Just a bit of caution is required. For example, gslapt states the kernel-source is installed, but it isn't. One can build a vanilla kernel from kernel.org (if they slapt-get --install diffutils) if desired to build any drivers you may need like nvidia. But it'd just be better if the ones matching the default kernel were included in the iso.

        

Several browser plugins worked out of the box such as the gxine movie player, flash, and javascript.

        

Then after installing java through gslapt:


Conclusion

So, as delivered Stx is a very capable yet light weight desktop system that has lots of personality and functionality. As installed one can accomplished most of their day to day tasks. Stx is ultra-stable and blazingly fast. As I've said before, I really like Stx a lot. If I mention it needs this or that, it's because I like it and plan to use it. The patches work fine, but I found the fresh install much cleaner and saw a few improvements not readily apparent in the patched system.

Stx is available for download primarily from ibiblio.org, but there are also two mirrors listed. They are the one in Germany and one in Bulgaria. I had the best luck from the one in Germany as ibiblio is always slow for me in my part of the world. For those who prefer bittorrent, they have that option available as well. Further, Stibs even offers the iso in 29 15 MB parts for those users on dial up. In addition, some Arabian Fonts are offered.

Previous coverage: RC3, RC2, RC Screenshots.

Current Screenshots.


More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.