Language Selection

English French German Italian Portuguese Spanish

Secure Boot isn't the only problem facing Linux on Windows 8 hardware

Filed under
Linux
Hardware
Microsoft

There's now no shortage of Linux distributions that support Secure Boot out of the box, so that's a mostly solved problem. But even if your distribution supports it entirely you still need to boot your install media in the first place.

Hardware initialisation is a slightly odd thing. There's no specification that describes the state ancillary hardware has to be in after firmware→OS handover, so the OS effectively has to reinitialise it again. This means that certain bits of hardware end up being initialised twice, and that's slow in some cases. The most obvious is probably USB, which has various timeouts as you wait for hardware to settle. Full USB support in the firmware probably adds a couple of seconds to boot time, and it's arguably wasted because the OS then has to do the same thing (but, thankfully, can at least do other things at the same time). So, looking for USB boot media takes time, and since the overwhelmingly common case is that users don't want to boot off USB, it's time that's almost always wasted.

One of the requirements for Windows 8 certified hardware is that it must complete firmware initialisation within a specific amount of time, something that Microsoft refer to as "Fast Boot".

rest here




More in Tux Machines

Plasma 5.12.5 bugfix update for Kubuntu 18.04 LTS – Testing help required

Are you using Kubuntu 18.04, our current LTS release? We currently have the Plasma 5.12.5 LTS bugfix release available in our Updates PPA, but we would like to provide the important fixes and translations in this release to all users via updates in the main Ubuntu archive. This would also mean these updates would be provide by default with the 18.04.1 point release ISO expected in late July. Read more

New Arduino boards include first FPGA model

Arduino launched a “MKR Vidor 4000” board with a SAMA21 MCU and Cyclone 10 FPGA, as well as an “Uno WiFi Rev 2” with an ATmega4809 MCU. Both boards have a crypto chip and ESP32-based WiFi module. In conjunction with this weekend’s Maker Faire Bay Area, Arduino launched two Arduino boards that are due to ship at the end of June. The MKR Vidor 4000 is the first Arduino board equipped with an field programmable . The Intel Cyclone 10 FPGA. will be supported with programming libraries and a new visual editor. The Arduino Uno WiFi Rev 2, meanwhile, revises the Arduino Uno WiFi with a new Microchip ATmega4809 MCU. It also advances to an ESP32-based u-blox NINA-W102 WiFi module, which is also found on the Vidor 4000. Read more

DragonFlyBSD 5.3 Works Towards Performance Improvements

Given that DragonFlyBSD recently landed some SMP performance improvements and other performance optimizations in its kernel for 5.3-DEVELOPMENT but as well finished tidying up its Spectre mitigation, this weekend I spent some time running some benchmarks on DragonFlyBSD 5.2 and 5.3-DEVELOPMENT to see how the performance has shifted for an Intel Xeon system. Read more

Red Hat News: KVM, OpenStack Platform 13 and More