Language Selection

English French German Italian Portuguese Spanish

Gadgets

Devices: Tizen, OpenZWave, and Ibase

Filed under
Hardware
Gadgets
  • Samsung Galaxy Watch, Running Tizen, is Launched

    Today, as expected, Samsung have launched a new smartwatch, the Samsung Galaxy Watch, yes, the name change is real (previously it has been known as the Gear S4). At the Samsung Unpacked event, we were given the Note 9 and the Galaxy Watch. The big headline for us is the watch will not be running Wear OS, as speculated once upon a time, but the Galaxy Watch will be running Tizen 4.0.

    We will have two models to choose from: 46mm available in silver and a 42mm black and rose gold versions. Samsung have realised that “one size does not fit all” and some might find a smaller watch face appealing.

  • Building a better thermostat with Home Assistant

    Next, I needed to look at software to use my hardware acquisitions as a thermostat. While all my devices were Z-Wave, and OpenZWave provides both C++ and Python interfaces I could use to access and control my devices, it was a bit too low-level for my taste.

    Instead, I decided to use the Home Assistant project, for a few reasons. First, I know a bunch of people who use it, hack on it, or both. Second, while all my current devices are Z-Wave, Home Assistant will let me branch out to use other kinds of devices if I want. Home Assistant supports a ton of different devices and services—you can look at the component list to see them all. For Z-Wave support, it leverages OpenZWave and provides a higher level interface that is a bit easier to deal with. Home Assistant is written in Python 3, which is very convenient for me since I do most of my programming in Python. It also has an active community that has been responsive and helpful.

    I installed Home Assistant on one of my servers and proceeded to configure its interface with my devices. There is a lot of detailed information available on setting up Home Assistant—you can refer to the official documentation for a starting point. For specific Z-Wave instructions, see the Z-Wave section in the Home Assistant docs.

    After setting up Home Assistant, I had a single web interface and API for controlling my new power switches and displaying data from the MultiSensor. But, I still didn't have a thermostat—just a pretty interface (that I could use remotely) for manually turning the AC on or off.

  • IP65 protected panel PCs feature Apollo Lake or Core-U chips

    Ibase announced three open-frame panel PCs with Linux support. The 15-inch, 1024 x 768 OFP-151-PC and 21-inch, 1920 x 1080 OFP-2100-PC run on the Pentium N4200 while the 21-inch OFP-2101-PC offers a choice of 7th Gen Core-U CPUs.

    Ibase, which last year launched an SE-102-N signage player, has now returned with a pair of fanless, open-frame touch-panel PCs that similarly run Linux 4.x or Windows 10 on an Intel Apollo Lake SoC. The 15-inch, 1024 x 768 OFP-151-PC and 21-inch, 1920 x 1080 OFP-2100-PC ship with a quad-core, 1.1/2.5GHz Pentium N4200 with 6W TDP.

ZX Spectrum Vega+ blows a FUSE: It runs open-source emulator

Filed under
Hardware
Gadgets

The ZX Spectrum Vega+ is running open-source Spectrum emulator software FUSE, The Register has confirmed while carrying out a hands-on review of the handheld console.

As regular readers know, the Vega+ is the flagship product of Retro Computers Ltd, the company which took £513,000 in crowdfunded cash from members of the public to produce handheld ZX Spectrum-themed gaming consoles. It failed to deliver any for two years and then belatedly emitted what appear to be several dozen of the devices last week.

With public interest at an all-time high in what the company has actually produced during the ongoing scandal, El Reg acquired one from an RCL customer for review purposes.

No instructions were supplied with the console. In time-honoured retro gaming fashion, The Register’s crack review team resorted to button-mashing to figure out what did what.

Read more

Galaxy Watch will run Tizen 4.0

Filed under
Linux
Gadgets

In May, Samsung trademarked the “Galaxy Watch” and “Galaxy Fit” monikers at the USPTO, suggesting its plan to bring its wearables under the Galaxy branding. Now two months later, SamMobile confirms that Samsung’s next smartwatch, the successor to the Gear S3, will indeed be called the Galaxy Watch, and not Gear S4. Furthermore, they add that the upcoming Galaxy Watch will run Tizen 4.0 out of the box.

Read more

Nintendo Found a Way to Patch an Unpatchable Coldboot Exploit in Nintendo Switch

Filed under
Security
Gadgets

If you plan on buying a Nintendo Switch gaming console to run Linux on it using the "unpatchable" exploit publicly disclosed a few months ago, think again because Nintendo reportedly fixed the security hole.

Not long ago, a team of hackers calling themselves ReSwitched publicly disclosed a security vulnerability in the Nvidia Tegra X1 chip, which they called Fusée Gelée and could allow anyone to hack a Nintendo Switch gaming console to install a Linux-based operating system and run homebrew code and apps using a simple trick.

Read more

Nintendo Switch can now run GameCube games – with an emulator and Linux

Filed under
Linux
Gaming
Gadgets

Great news, everyone: you can now play GameCube games on your Nintendo Switch – but only with a considerable amount of hacking your console. The Switch can at last run GameCube games through an emulator hosted on a Linux distribution loaded onto the console.

The development was made by YouTube user Mizumi, who uploaded a video of the Dolphin GameCube emulator program running on Lakka, a Linux distribution for game consoles that looks a lot like the PlayStation 4 interface using a front-end known as RetroArch.

Read more

Botond Ballo: Review of the Purism Librem 13

Filed under
Reviews
Gadgets

The Purism Librem 13 has largely lived up to my goal of having a lightweight productivity laptop with a decent amount of memory (though I’m sad to say that the Firefox build has continued to get larger and slower over time, and linking is sometimes a struggle even with 16 GB of RAM…) while also going the extra mile to protect my privacy and freedoms. The Librem 13 has a few deficiencies in comparison to the ThinkPad line, but they’re mostly in the category of papercuts. At the end of the day it boils down to whether living with a few small annoyances to benefit from the additional privacy features is the right tradeoff for you. For me, so far, it has been, although I certainly hope the Purism folks take feedback like this into account and improve future iterations of the Librem line.

Read more

Also: Software delays, lack of purpose means Microsoft’s “Andromeda” may never arrive

Sailfish in PDAs

Filed under
Gadgets
  • Sailfish for the Gemini PDA lets you ditch Android
  • A slick phone Linux for your pocket PDA? Ooh, don't mind if I do, sir

    Sailfish has become the fourth OS to be officially supported on Planet Computing's pocket computer, the Gemini PDA, and eager beavers can download an image from Planet today.

    Planet has also released an official Debian distro for download. The keyboard-toting device boots into Android, while support for the Ubuntu flavour of Linux is slated.

    Sailfish matters because it's a Linux created primarily with phones and pocket devices in mind – although it will run on static kit like TVs, too. Nokia launched its first Linux tablet in 2005, and the Maemo platform underpinning it morphed into Meego after Intel joined in 2010.

Sailfish for Gemini Community Edition available now

Filed under
Linux
Gadgets

As the first step in bringing Sailfish to Gemini, our friends at Planet Computers have today made the community edition of Sailfish OS 2.1 available for the Gemini PDA. This version has been tested and verified by both Jolla and Planet.

As it’s a community initiative, the version is still somewhat limited, but essential features are supported. With this version you won’t yet get software updates or support for Android apps. Also the overall support is limited to our community’s efforts.

Read more

“Respects Your Freedom” (RYF) and Purism's Librem 5

Filed under
GNU
Gadgets
  • Purism's Librem 5 To Rely On Secondary Processor For Binary Blobs

    With not being able to deliver a 100% fully free software / libre system, the Librem 5 smartphone will rely upon a secondary processor for dealing with the necessary binary blobs for hardware initialization to keep them out of touch from the U-Boot boot-loader and Linux kernel.

    The first road-block in their effort to make the Librem 5 smartphone as open as possible is the DDR PHY with firmware blobs needed for the DDR4 memory training process at boot time. With it not being realistic for them to rewrite the firmware blob to do the DDR4 PHY training, they are planning to punt the binary-only blobs out to a secondary processor. In doing so, they can also apply for an exclusion with the Free Software Foundation for still having a device that "Respects Your Freedom" while still having necessary binary blobs at play.

  • Solving the first FSF RYF hurdle for the Librem 5

    While investigating using the i.MX 8 for the Librem 5 phone we found an issue that would have been problematic for us to obtain the Free Software Foundation’s “Respects Your Freedom” (RYF) hardware endorsement...

(GNU)/Linux Phones: Purism and eelo

Filed under
GNU
Linux
Gadgets
  • Purism Reaffirms Plans To Bring Librem 5 Smartphone To Market In January

    Linux hardware manufacturer Purism is reaffirming their commitment this morning to shipping the Librem 5 smart-phone in January.

  • Purism’s Security and Privacy Focused Librem 5 Smartphone Makes Major Strides in Manufacturing and Development

    Purism, the social purpose corporation which designs and produces popular privacy conscious hardware and software, has announced that its groundbreaking Librem 5 smartphone is currently on schedule for its planned January 2019 delivery date seven months after its crowdfunding campaign raised nearly $2.5 million for the project.

    The Librem 5 will be the world’s first community-owned smartphone ecosystem that gives users complete control over their mobile device.

  • If I had an eelo co-founder

    BUT our eelo community is growing fast: we have close to 15 developers working full time, a dozen translators/editors… to reach our targets, and I’m currently limiting this number.

    eelo could grow way faster and way bigger!

    The reason of the current limit is that my available time of work is limited, and my TODO list is growing faster than I can execute.

    Therefore, I need to find solutions until we find enough funding to hire some people to structure all projects more.

Syndicate content