Language Selection

English French German Italian Portuguese Spanish

Graphics/Benchmarks

Linux Benchmarks Of Intel's Quark X1000 On The Galileo Board

Filed under
Graphics/Benchmarks
Linux

For those curious about the performance of Intel's "Quark" x86 SoC for very low-power applications, including wearable devices, here's some benchmarks of Debian on their Galileo development board.

Read more ►

30-Way Graphics Card Comparison On Ubuntu Linux 14.04 LTS

Filed under
Graphics/Benchmarks
Linux
Ubuntu

...in this article we are benchmarking the AMD Catalyst and NVIDIA binary drivers on Ubuntu Linux.

Read more ►

Radeon Open-Source Performance Over Three Years, Compared To Legacy Catalyst

Filed under
Graphics/Benchmarks
Linux

For this article we benchmarked Ubuntu 14.04 in its current development state and compared it to the Ubuntu releases going back three years to Ubuntu 11.10.

Read more ►

NVIDIA's GeForce GTX 750 Is A Great $120 Linux Graphics Card

Filed under
Graphics/Benchmarks
Linux
Hardware

The NVIDIA GeForce GTX 750 is a great value graphics card for $120 that delivers great mid-range performance while its performance-per-Watt is exceptional. If you don't mind using binary graphics drivers, the GTX 750 based upon NVIDIA's new Maxwell architecture with the GM107 is worth checking out.

Read more ►

PC-BSD 10.0 vs. PC-BSD 9.2 vs. Ubuntu 13.10 Benchmarks

Filed under
Graphics/Benchmarks

After running through some challenges in setting up PC-BSD/FreeBSD 10.0 and its many changes, here are benchmarks of the feature-rich operating system update. Benchmarks were done on the same laptop of PC-BSD 10.0, the former PC-BSD 9.2 release, and Ubuntu 13.10.

Read more ►

Ars walkthrough: Using the ZFS next-gen filesystem on Linux

Filed under
Graphics/Benchmarks
Linux

In my last article on next-gen filesystems, we did something in between a generic high altitude overview of next-gen filesystems and a walkthrough of some of btrfs' features and usage. This time, we're going to specifically look at what ZFS brings to the table, walking through getting it installed and using it on one of the more popular Linux distributions: Precise Pangolin. That's the most current Long Term Service (LTS) Ubuntu release.

Read more ►

The NVIDIA GTX 750 Ti Maxwell Continues Running Great On Linux

Filed under
Graphics/Benchmarks
Hardware

Back on Tuesday I delivered a launch-day review of the NVIDIA GeForce GTX 750 Ti on Linux. This first graphics card built on NVIDIA's new Maxwell architecture has been running fantastic under Linux for being a mid-range graphics card. The GM107 GPU core found on the GTX 750 Ti is incredibly power efficient, as was shown in numerous articles on launch-day. For those curious more about the GeForce GTX 750 Ti Linux performance, here are some more OpenCL and OpenGL performance results.

Read more ►

Broadwell Now Officially Enabled With Intel Mesa

Filed under
Graphics/Benchmarks

Broadwell support has been a work-in-progress on Linux for many months and most of the hardware enablement is complete. The Mesa driver has had mainline support for Intel Broadwell graphics for some time now, but only today is it being enabled by default and not hidden behind the Intel preliminary hardware support flag. The latest Broadwell work was with this commit and other changes.

Read more ►

Linux 3.14 File-System HDD Benchmarks

Filed under
Graphics/Benchmarks
Linux

Early Linux 3.14 kernel benchmarks indicated there might be some slowdowns in disk/file-system performance for this next major kernel release. That early testing was done from an Intel ultrabook with solid-state drive while we're now in the process of carrying out more focused testing of Linux 3.14 on both HDDs and SSDs. In this article are our first hard drive benchmarks from the Linux 3.14 Git kernel compared to the stable 3.12 and 3.13 kernels.

Read more ►

Mesa 10.1 Should Make It Into Ubuntu 14.04 LTS

Filed under
Graphics/Benchmarks
Ubuntu

Mesa 10.1 brings many new OpenGL features, new hardware support, and as with most Mesa updates is a very worthwhile upgrade for users of the open-source Linux graphics stack. There's been many articles about Mesa 10.1 on Phoronix while there's also the Mesa 10.1 feature overview. Mesa 10.1 itself is in a release candidate stage but should be officially released later this month on 28 February.

Read more ►

Syndicate content

More in Tux Machines

Android Leftovers

Widora TINY200 Allwinner F1C200s ARM9 Development Board Support DVP Camera, Up to 512MB SD NAND Flash

Widora TINY200 is a tiny ARM9 development board equipped with Allwinner F1C200s with a DVP camera interface compatible with OV2640 / 5640 sensor, an audio amplifier, and various storage options from a 16MB SPI flash to a 512MB SD NAND flash. I first heard about the processor when I wrote about Microchip SAM9X60 ARM9 SoC last month, and some people noted there were other fairly new ARM9 SoCs around such as Allwinner F1C200s that also includes 64MB RAM so you can run Linux without having to connect external memory chips. Read more

Open Hardware and Devices With GNU/Linux

  • Instaclock | The Magpi 92
  • [Old] BrailleBox: Android Things Braille news display

    To create the six nubs necessary to form Braille symbols, Joe topped solenoids with wooden balls. He then wired them up to GPIO pins of the Pi 3 via a breadboard.

  • Sending my alerts directly to the keyboard

    As I learned while making this blog post, custom drivers are not always the best way to add custom functionality to USB devices on Linux, sometimes there are pre existing APIs that can make adding functionality a lot easier.

    Despite me ending up not using a custom USB driver in the final version, it was still quite interesting to play around with, if for no other reason than I now have another trick up my sleeve for future projects.

    And now thanks to my keyboard, I will never miss alerts again.

  • Onlykey review

    There’s a sort of soft rubber case around the key, you can get all kinds of colors (I just stuck with black). It also comes with the handy little carribeener to attach it to your keychain or whatever. So, once you have the firmware somewhat up to date, you can run the app. It will also update firmware as long as it’s not too old. The firmware is open source: https://github.com/trustcrypto/OnlyKey-Firmware On your first run (or if you factory wipe it), you have to do a bit of setup. You can enter 2 profile pins (sequences of buttons). They suggest that this might be ‘work’ and ‘home’, but you could use them for whatever you like. You can also enter a ‘self destruct’ profile pin, which wipes back to factory settings if you enter it. You can also tell it to do this if someone enters the wrong pin 10 times, but it will flash red and stop taking input after 3 failed pins. So to wipe it this way you have to enter 3 wrong pins, remove, insert, 3 more wrong pins, remove, insert 3 more wrong pins, remove, insert, 1 more wrong pin. You can also load a firmware called the “International Travel Edition” that has no encryption at all (it’s only protected by the pin).

  • Widora TINY200 Allwinner F1C200s ARM9 Development Board Support DVP Camera, Up to 512MB SD NAND Flash

    Widora TINY200 is a tiny ARM9 development board equipped with Allwinner F1C200s with a DVP camera interface compatible with OV2640 / 5640 sensor, an audio amplifier, and various storage options from a 16MB SPI flash to a 512MB SD NAND flash. I first heard about the processor when I wrote about Microchip SAM9X60 ARM9 SoC last month, and some people noted there were other fairly new ARM9 SoCs around such as Allwinner F1C200s that also includes 64MB RAM so you can run Linux without having to connect external memory chips.

  • Librem 5 January 2020 Software Update

    January saw development take off again after the end-of-year break, and following on from the Chestnut shipment of the Librem 5. Some of the activities below were already mentioned in their own articles in Purism’s news archive; others will be covered in more depth in future articles. This is just a taste of all the work that goes into making the Librem 5 software stack. You can follow development more closely at source.puri.sm.

  • ESP32-S2-Saola-1 Development Board is Now Available for $8

    Espressif ESP32-S2 WiFi SoC mass production started at the end of February 2020, and soon enough we started to find ESP32-S2 SoC and modules for $1 to $2 on sites like Digikey, but so far we had not seen ESP32-S2 development boards for sale. The good news is the breadboard-friendly ESP32-S2-Saola-1 development board has started to show up for $8 on resellers such as Mouser and Digikey albeit with a lead time of 8 to 12 weeks.

Georges Basile Stavracas Neto: This Month in Mutter & GNOME Shell | March 2020

During March, GNOME Shell and Mutter saw their 3.36.0 and 3.36.1 releases, and the beginning of the 3.38 development cycle. We’ve focused most of the development efforts on fixing bugs before starting the new development cycle. From the development perspective, the 3.36.0 release was fantastic, and the number of regressions relative to the massive amount of changes that happened during the last cycle was remarkably small. Read more