Language Selection

English French German Italian Portuguese Spanish

Wireless Internet Connection

Filed under
Hardware

Hi I am new to Linux and have so far played about with ubuntu, pclinuxOS and have recently installed Sam Linux 2007. I must admit that i was rather cautious at first about using linux but have so far it has exceeded my expectations. I just have one problem.

Just recently my port switch on my gateway/access point broke which left me with no wired connection. I decide to go with the option of buying a wireless usb stick for my desktop. I bought a belkin wireless usb and it works fine through windows but i am not having any luck in Linux. In Sam and pcLinux it recognises the driver as rt73, but in the device manager equivalent it is an unknown driver.

I have tried setting up my wireless internet connection. It even comes up with the name of the usb stick and my network but i am still not able to connect. Is this a problem with the driver? Does Sam Linux support WPA-PSK, as this is what i use? I have also tried connecting using WEP?

Does anyone have any ideas or is there a distro out there that supports these?

I really do want to learn more about linux

re: wireless connection

Quote:

I have tried setting up my wireless internet connection. It even comes up with the name of the usb stick and my network but i am still not able to connect. Is this a problem with the driver? Does Sam Linux support WPA-PSK, as this is what i use? I have also tried connecting using WEP?

Well, wpa was broken in earlier pclos 2007 tests, and I believe Sam to be based on test 1 of pclos 2007. So, I'd say no it isn't supported in Sam. Actually, I should test it in test 3 of pclos before really answering, but until I get back to this and edit it, why don't you disable wpa on your router/access point long enough to see if it'd connect without it? WEP works in both.

usb ethernet? shoo, I don't know much about them. What is the exact brand and model number? What does ifconfig, iwconfig, and iwlist scan say?

EDIT: After further tests I found that yes, wpa-psk is working in PCLOS 2007 Test 3, but not Sam 2007. Try connecting without wpa and see if the hardware is working first.

The usb networking adapter

The usb networking adapter is a Belkin F5D7050UK. I will try the above suggestions and get back to you.

More in Tux Machines

A deep dive into Raspberry Pi Zero 2 W’s power consumption

When I completed my review of Raspberry Pi Zero 2 W, I mentioned I would test the power consumption of the board later. It took a while, but I’ve finally come around it using Otii Arc from Qoitech and Otii software to provide some pretty power consumption charts, and even energy consumption. Since the Raspberry Pi Foundation recommends a 5V/2.5A power supply, I’ll first try to get as close as possible as 2.5A, then I’ll go through tricks to reduce idle power consumption to less than 75 mA / 375 mW, and finally check the energy consumption under various CPU core count and frequency. I started with the latest Raspberry Pi OS Lite “BullEyes” image and connected my Raspberry Pi Zero 2 W board to Qoitech Otii Arc tools as shown below. It used to cost around $500, but now pricing starts at $699, and it’s a great tool for people developing battery-powered devices, and I admit it’s a bit over the top, but the purpose of this post, but it still does the job. Read more

13 Best Free and Open Source Build Systems

Build automation is the process of automating the creation of a software build and the associated processes including: compiling computer source code into binary code, packaging binary code, and running automated tests. This type of software takes as input the interdependencies of files (typically source code and output executables) and orchestrates building them, quickly. In the beginning, Make was the only build automation tool available beyond home-grown solutions. Make has been around since 1976. Make remains widely used, especially in Unix and Unix-like operating systems. But there are lots of other high quality build systems Here’s our recommendations captured in a legendary LinuxLinks chart. Read more

Jolla: Congrats UK, we’re back!

Last month, as part of our 10-year celebrations, we announced that we’re working to expand the Sailfish X availability to include new countries in addition to the current EU, Norway, and Switzerland. Now we have great news for you: we have re-opened Sailfish X sales in the UK! The UK has always been a stronghold for Sailfish OS. This started already in the early days when many Brits decided to purchase the Jolla phone and start their Sailfish OS journey. Over the years, our developer community and fan base has grown in the UK, and many of our employees (aka sailors) are also from this great island nation. All this in mind, we were disappointed when we had to leave the UK for a while (Brexit), but now we are thrilled to start again! Read more

Capturing and Correcting the Perfect Video Color

Next in our video editing series for the Librem 14, Gardiner Bryant dives into color balancing. In this video, you’ll learn how to capture images without losing color data and how to use effects to correct color using Kdenlive, a free software video editing solution. This video will help those looking to level up their overall video production. We hope to do similar projects like this in the future, so if you have ideas for topics you’d like us to cover, please let us know! Read more